Every piece here started as a real conversation with a real client, with a reason behind it, a story, and a lot of emotion. We’re not showing you a catalog. We’re showing you what’s possible, so you can design your own.
Recreated Vintage S-Curve Diamond Ring in Platinum
This S-shaped bypass ring was rebuilt in platinum after the original — a custom piece from the 1950s — was stolen. Three round natural diamonds sit in a raised box setting at the center, with pave-set round diamonds tracing both curves of the S so no metal band is left bare. The design was refined over several rounds of sketches and 3D renders to match the client’s memory of the original as closely as possible, including a solid, gap-free profile between the stones and the band. Platinum was chosen over white gold for its durability and because it holds its white color without replating over decades of wear. The piece is intended to be worn daily and eventually passed down to a family member.
Slimmed Heirloom Ring — Engraved Band, Moissanite Center
This slender sterling silver band takes its cues from a much heavier heirloom ring, reworked into a design that reads as an homage rather than a copy. Where the original relied on wide cut-out details and a cluster of stones, this version simplifies to a single bezel-set moissanite flanked by hand-engraved leaf, chevron, and spiral motifs. The band was narrowed considerably from the original’s thickness, with the design adjusted from cut-outs to surface engraving to preserve strength at the smaller scale. It suits someone who wants a everyday-wearable connection to a family piece without replicating it stone for stone.
Recreated Heirloom Ring — Silver Swirl with Blue Spinel
This sterling silver ring reimagines a beloved grandmother’s ring using only memory and a handful of blurry photos as reference. The asymmetrical swirl design features two connected forms — one rounded, one more pointed — meeting at a bezel-set oval blue spinel that echoes the turquoise-like stone of the original. One side of the setting is covered in a cluster of raised, granulated dots, replacing what the client remembered as a textured, non-linear decorative element. The band was widened partway through the design process, which ended up improving the overall proportion of the piece. Made in sterling silver for a cost-conscious approach to a sentimental recreation, this ring suits anyone who wants to carry a piece of family history forward without needing an exact replica — an interpretation that captures the feeling of the original rather than a precise copy.
Recreated Ruby & Diamond Heirloom Band in Gold
This 14k yellow gold band alternates five marquise-cut natural rubies with four round natural diamonds, set across the top portion of a slim polished band that stays smooth underneath. The marquise cut was chosen to match the elongated shape of the rubies in the original piece, worked out from photos and careful comparison of stone proportions. It sits low and close to the finger, making it easy to stack or wear on its own every day. The design suits anyone who wants to bring a family piece back into daily rotation without it feeling fragile or precious to the point of being set aside.
Grandmother’s Onyx Ring Recreated as Two Family Replicas
This ring recreates a family engagement ring that belonged to a client’s grandmother, rebuilt as two matching pieces from photographs and video rather than the physical original. An emerald-cut black onyx center stone sits in a white gold diamond-shaped frame with a single round diamond accent, flanked by ornate scrolling yellow gold shoulders on either side of the band. The design was refined during the render stage to bring the prong line flush against the stone and to shift the framing stone’s cut closer to the diamond-like shape seen in the original. Made in 14k yellow gold, the two rings were sized differently — one size 6 and one size 7 — so each recipient received a piece fitted to them individually. It suits someone looking to carry a piece of family history forward in a way that is wearable rather than kept in a box.
Recreated Amethyst Ring — Rose Gold Lattice Band
This ring recreates a piece that had been worn for years before it was lost — a grandmother’s ring with a single marquise amethyst at the center. The original was gold; this version was rebuilt in 14k rose gold at the client’s request, with the same lattice-like texture carried across both shoulders flanking the stone. A six-prong setting holds the roughly one-carat marquise amethyst securely at center, with the geometric diamond-lattice pattern giving the shoulders dimension and shine without adding another stone. The design stays close to the original’s proportions and layout, rebuilt entirely from reference photos. It suits someone who wants a family piece back in wearable form, in a metal tone that fits how they wear jewelry today.
Recreated Heirloom Ring — Woven Gold Band, Blue Topaz
This ring was recreated from photographs of a family heirloom that had been lost. Built in 14k yellow gold, it centers a round blue topaz held in a four-prong setting, flanked on both sides by a woven, crisscross gold pattern that tapers into a smooth polished shank toward the back of the band. The design keeps the visual weight at the top of the finger while thinning out where the ring meets the hand, echoing the shape the client remembered from the original piece. It suits someone who wants a design rebuilt faithfully from limited reference material rather than a fresh, unrelated design.
Sunburst Halo Ring — Recreated Heirloom for a Daughter
This oval cluster ring was recreated from photographs of a ring passed down within a family, rebuilt entirely from images and memory rather than the physical piece. A marquise-cut lab diamond sits bezel-set at the center of a radiating sunburst gold frame, surrounded by a scalloped halo of round pave diamonds set in white gold for contrast against the 14k yellow gold band. The design was adjusted after the first render so the sunburst spokes read in gold rather than silver, matching the client’s memory of the original piece more closely. Its vintage cluster styling and dimensional halo make it a statement ring suited to someone who wants a piece with real family history behind it, ready to be worn daily or passed on again.
Bypass Twist Ring — Recreated Gold Infinity Design
This 14k yellow gold bypass ring features two smooth, wave-like teardrop forms that cross and interlock at the center, creating an infinity-like silhouette. The band is wide and substantial at the top, tapering to a narrower, more comfortable profile at the back. High-polish finish throughout gives the organic, sculptural shapes a fluid, continuous look. The design was recreated from memory and photographs of a ring the client had lost, with careful attention to proportion and the interplay between the two crossing forms. It suits someone who wants a bold, sculptural ring with a design language rooted in movement rather than a traditional stone-centered piece.
