Heirloom Cross Pendant — Recreated in 14k Gold for Family

$$$
14k yellow gold

A family cross, worn by a grandfather for years and then by his wife after his passing, had become a source of tension among relatives who each felt a claim to it. Rather than let one piece divide the family, the client asked to have it duplicated so multiple family members could each carry their own. The order grew from two pendants to four after the grandmother's own health took a difficult turn, so she could have one of her own.
'I think it looks amazing.' — on seeing the first render
Quick specs

Design type

Primary Metal

Primary Stone

Accent Stones


Design Complexity


Intent: Certainty

Size
Pendant approximately 1.3 inches long.

How they made it distinctive
  • 01
    Openwork knot-and-triangle crown design + recreated to preserve the exact silhouette of a decades-old family cross
  • 02
    Faceted, ridged vertical lower arm + matched to the original's proportions after the client requested measurement verification
  • 03
    Made in a set of four identical pendants + so several family members could each hold their own version of the same meaningful piece
  • 04
    14k yellow gold construction + chosen to balance durability for daily wear with a warm tone matching the original
How you'd make it yours
Metal: this piece is 14k yellow gold; the same design works in 18k yellow gold or white gold for a different tone
Quantity: this batch was four matching pendants; a new commission could be made as a single piece or any other number
Chain: this piece was ordered pendant-only; a matching chain can be added to a new commission
Size: this piece is approximately 1.3 inches long; a new commission can be scaled larger or smaller
One of a kind: these exact four pendants were recreated for one family and are not reproduced for other clients — a new commission is an original piece inspired by this one, not a copy
Design changes made
Design matched the initial brief without major changes. The client requested measurement and thickness verification on the approved render, which was provided before the piece moved to production.
Who this is for
This piece is for someone who wants a meaningful family object to belong to more than one person at once, rather than staying with just one relative. It's especially right if a treasured item has become a source of disagreement and you're looking for a way to let everyone carry a piece of it without anyone giving anything up.
How it's made
Once the design was approved from reference photographs of the original cross, a 3D model was built and used to produce wax models on a 3D printer. The wax models were attached to a tree and invested in plaster, then fired in a kiln to burn out the wax and leave a hollow mold. Molten 14k yellow gold was then cast into each mold to form the raw pendants. After casting, each pendant was cleaned, hand-finished, and polished to a bright shine across the openwork knot top and the faceted lower shaft. Because the design is an open, pierced structure rather than a solid plate, extra care was taken during polishing to keep the interior edges of the knot and loops crisp and even. Each of the four pendants was finished to match the others precisely, since they were meant to be identical.
Key note
Because the cross has an open, pierced design rather than a solid surface, the interior edges of the knotwork require hand-finishing from the inside out to avoid rounding off the detail that defines the original pattern.
Pricing guidance
A duplicated gold cross pendant of this size and openwork detail sits in the mid range for custom pendant work. Most of the cost comes from the labor of hand-finishing an open, pierced design rather than a solid casting, and that cost scales with each additional duplicate produced. Ordering multiples at once is typically more efficient than commissioning them one at a time.
Moves price up ↑
  • ↑
    Upgrading from 14k to 18k gold across all duplicates
  • ↑
    Adding stones or engraving to any of the pendants
  • ↑
    Increasing the overall size beyond the original dimensions
  • ↑
    Requesting a heavier gauge of metal for added durability
  • ↑
    Ordering additional duplicates beyond the original batch
Moves price down ↓
  • ↓
    Reducing the number of duplicates ordered
  • ↓
    Choosing sterling silver or gold-plated silver instead of solid 14k gold
  • ↓
    Simplifying the openwork detail to a solid cross silhouette
  • ↓
    Omitting individual chains and pendant-only pricing
  • ↓
    Using a smaller overall pendant size
Questions people ask
Yes, a cross like this can be recreated from reference photographs alone, without the original piece in hand. The process starts with a detailed 3D model built from the photos, which is then shared as a render for approval before anything is cast. Measurements and metal thickness can be verified against the render to confirm accuracy to the original. Minor differences are possible since the recreation is built from photos rather than a direct scan, but the goal is as close a match as the reference material allows.
For a design like this, the full process from approved design to finished pieces typically runs several weeks, covering wax modeling, casting, finishing, and polishing for each individual pendant. Producing several duplicates together is generally more efficient than making them one at a time, since the same approved 3D model is used for every unit. Each pendant still goes through its own casting and hand-finishing to make sure they match each other closely. Exact timing can vary based on order size and finishing detail.
A 14k gold cross pendant with an open, pierced design like this one sits in the mid range for custom pendant work, largely because of the hand-finishing labor an openwork design requires compared to a flat, solid piece. Cost typically scales per unit when ordering multiples, since each one is cast and finished individually even though they share the same design. Gold karat, overall size, and any added stones or engraving are the main variables that move the price from there. A solid, non-pierced version in the same metal would generally cost less.
Yes, 14k gold is a common choice for daily-wear pendants because it balances durability with a rich, warm color that doesn't fade. It's harder than higher-karat golds like 18k or 24k, which makes it more resistant to scratching and bending during regular wear. An openwork design, like the knotted cross pattern here, is slightly more delicate than a solid piece because of the pierced sections, but 14k gold holds up well to normal daily use. Avoiding harsh impacts and removing the piece during heavy manual work will help it last.
Yes, a chain can be added to any cross pendant like this one, though it is priced separately from the pendant itself. Clients who already have a chain they want to use, or who plan to pair the pendant with an existing piece, often order the pendant on its own. Chain width and length can be selected to suit how the pendant will be worn. It's worth confirming the bail opening on the pendant is wide enough for the chain you intend to use.
Yes, ordering multiple identical pendants from a single approved design is a common request, particularly for family pieces meant to be shared among several people. Because the 3D model is built once and reused, each additional pendant is cast and finished individually but follows the same confirmed design and measurements. This keeps every piece consistent in size, detail, and proportion. It's a practical way for a meaningful design to be worn by more than one person at the same time.
An openwork cross, like this knotted design, has pierced or cut-out sections that create negative space within the piece, rather than being a solid, flat shape throughout. This generally requires more hand-finishing time, since the interior edges of the open sections need to be smoothed and polished individually. A solid cross is typically simpler and faster to finish, which usually makes it less expensive. Openwork designs tend to feel more detailed and dimensional, while solid designs read as cleaner and more minimal.
When a piece is being recreated rather than physically altered, the original maker's marks or purity stamps are not transferred over, since a new piece is cast from a new mold. If having a specific mark or stamp reproduced matters to you, it's worth mentioning during the design phase so it can potentially be incorporated into the new 3D model. Standard practice is to stamp the new piece according to its actual metal content rather than replicate historic stamps. This is worth discussing early if authenticity of markings is a priority.

Your vision. Your design. Your piece.

Create a custom jewelry piece that celebrates you - free to begin.