High

This engagement ring centers on a one-carat heart-shaped lab diamond, held in a four-prong setting at the tip and sides of the heart. The band is a continuous twist of polished platinum, with four small round diamonds set into the twist on either side of the center stone, extending the sparkle without competing with the heart shape. The design began as a more elaborate concept incorporating six birthstones for a blended family, then was simplified to keep the engagement ring focused on the center diamond, with the birthstone symbolism planned for a companion wedding band. The result is a clean, classic silhouette with a twisting band that gives it movement and texture. It suits someone who wants a heart-shaped center stone treated as the clear focal point, with just enough surrounding sparkle to frame it, in a durable platinum setting built for daily wear.

This engagement ring was designed to echo the look of a piece that belonged to the wearer’s mother, reimagined with a hexagonal step-cut center stone in a deep teal-blue hue. Round diamonds flank the center stone, while marquise-shaped clusters of small blue accent stones sit further along the band, framed with fine milgrain detail. Set in 14k white gold, the design balances the sentimental nod to the original piece with new stone choices selected for both color and durability. The result is a ring that carries forward a family connection while standing on its own as an original design.

This thin men’s wedding band is crafted in 14k white gold with a soft matte finish and a low dome profile for everyday comfort. A single small lab-grown diamond is set flush on the interior of the band, invisible when worn but a private detail he carries with him. The inside of the band also carries a short cursive engraving, adding another layer of personal meaning to a simple, understated design. At 4mm wide, the band is deliberately slim and unobtrusive, suited to someone who wants a wedding band that reads as classic from the outside while holding something meaningful on the inside.

This pendant brings together five birthstones in a single cluster composition — a large emerald and a large sapphire bezel-set at the center, surrounded by smaller emerald and aquamarine accents arranged around them like orbiting planets. Made in 14k yellow gold with a matching 18-inch box chain, the design was built specifically to represent a family: two central stones flanked by three smaller ones, each corresponding to a family member’s birth month. All stones are lab-grown, chosen for both environmental reasons and cost efficiency, with identical optical and chemical properties to their natural counterparts. The bezel settings keep every stone secure and give the cluster a smooth, rounded profile that sits comfortably at the neckline. It suits someone who wants a family piece that reads as a cohesive design rather than a simple row of stones, with enough presence to be a focal necklace without feeling oversized for daily wear.

This engagement ring centers a 3.03 carat marquise-cut lab-grown diamond, flanked by two pear-shaped lab diamonds set in claw prongs. The band splits into a cathedral-style V beneath the center stone, a detail refined through several rounds of design revision to achieve a delicate, twisted profile without sacrificing structural strength. Set in 18k yellow gold, the ring balances a bold center stone with an open, airy gallery underneath. The design moved through multiple iterations — prong style, side stone shape and alignment, and the shank silhouette were all adjusted based on client feedback before the final version was approved. It suits someone who wanted real input into the fine details of their ring rather than a stock setting, and who was drawn to a marquise silhouette paired with a distinctive, sculptural band structure.

This engagement ring set is built from three interlocking bands in 14k white gold, designed to be worn together as one piece. A 2.51-carat oval lab-grown diamond sits on a clean solitaire band, while a connected two-loop ring guard curves around it, its surface set with small lab-grown accent diamonds. The guard’s loops were shaped and rounded specifically so the design reads as an abstract form rather than an obvious letter, with no sharp points to catch on clothing or skin. The three rings slide onto the finger together, with the guard holding the solitaire centered and aligned. It suits someone who wants a personal, hidden meaning built into the structure of the ring itself rather than displayed on the surface, and who wears their jewelry every day.

This engagement ring pairs a bold elongated oval center diamond with a softly split yellow gold band, finished with a single delicate leaf engraved on each arm. Small round diamonds are set flush into the band near the point where the split meets, adding quiet sparkle without competing with the center stone. The band was built slightly thicker than a standard profile to match a ring the client already wears and loves the feel of. Designed with a low center setting in mind, the ring balances presence with everyday comfort, making it a fitting choice for someone who wants a substantial center stone without a ring that feels top-heavy.

This engagement ring reimagines a hummingbird in flight, with sculpted wing forms wrapping around a bezel-set oval lab-created ruby at the center. Small round lab-grown diamonds trace the shoulders of the band, and feather-like engraving runs along the profile for added texture. Built in 14k yellow gold with a flush, low-profile setting designed for comfortable daily wear, the ring carries a personal engraving inside the band. It was designed to echo the client’s own ring while introducing new coloring and symbolism specific to the couple.

This engagement ring centers a large oval moissanite, chosen for its brilliance and elongated shape, set above a hidden halo of small pave diamonds that adds sparkle without changing the ring’s clean silhouette from the top view. The band is a slim, straight 14k yellow gold shank, paired with platinum prongs for extra durability and a whiter contrast around the stone. A bridge area was deliberately built up slightly to allow a future wedding band to sit flush against the engagement ring. The inside of the band carries a private engraving, kept short to suit the narrow band width. This design suits someone who wants a classic solitaire look from above with a hidden layer of detail underneath, in a piece built to pair cleanly with a slim wedding band down the road.

This engagement ring combines a dark, textured center band with two polished 14k yellow gold rails on either side. The center section is cast in silver, finished matte, and plated in black rhodium to create a woven vine-and-leaf pattern that reads as a naturalistic braid running around the entire ring. A single round natural sapphire in a deep, intense blue sits bezel-set flush within the dark center, chosen so the stone integrates into the texture rather than rising above it on prongs. The three cast sections — two gold rails and the vine-textured center — are soldered together into one solid ring rather than assembled as separate moving parts. The matte finish on the center section was a late refinement, added specifically so the vine and leaf detailing would read clearly rather than disappearing into the sheen of polished metal. The result suits someone who wants a ring with real dimensional texture and a nontraditional dark-and-gold palette, without losing the durability and comfort of a standard band profile.

This engagement ring centers a 2-carat elongated radiant-cut lab diamond in a classic four-prong solitaire setting, finished in warm 14k yellow gold. The band carries a subtle sculptural detail where the basket connects into the shank, leaving open negative space just behind the stone — a custom addition built from a design board the recipient herself had put together. The prongs are finished to a pointed claw shape after the stone is set, keeping the profile refined rather than bulky. It suits someone who wants a solitaire with unmistakable presence but without a busy or heavily embellished setting.

This engagement ring centers a pear-shaped lab-grown diamond set high above a hidden halo, with round moissanite accent stones tracing both sides of the polished 14k white gold band. The high-profile setting and pear silhouette give the center stone a distinct, elongated presence, while the hidden halo adds brilliance without changing the outline visible from above. The band was widened partway through design to better proportion the stone size, and the accent stones were adjusted to match. It suits someone who wants a classic pear-solitaire silhouette with extra sparkle built into the setting itself.

This 14k white gold engagement ring was designed as a self-purchase to mark a 50th birthday. The bypass band holds a round aquamarine in an open six-prong setting on one side, and a round grey pearl cupped in a wrapping metal setting on the other, creating an intentionally asymmetrical silhouette. The pearl was selected to honor a family tradition of a non-diamond engagement ring, while the aquamarine reflects the wearer’s own birth month. The result is a modern, wearable ring built from two contrasting textures and tones — the faceted brilliance of the stone against the soft luster of the pearl. It suits someone who wants a ring with personal meaning built into the design itself, not just the occasion it marks.

This engagement ring centers a marquise-cut moissanite in a four-prong setting, with pointed claw-style prongs shaped after the stone was set. The 14k yellow gold band curves symmetrically on both sides of the stone, tapering from about 3mm at the back to roughly 1.5mm near the center for a refined, balanced profile. The design moved from an original asymmetric bypass concept to a fully symmetrical version after the couple reviewed a printed resin model and felt the mirrored curve suited their taste better. A private engraving reading a short phrase, rendered with a heart symbol and ampersand to fit the space, sits on the inside of the band. The combination of a classic solitaire silhouette with a subtly organic, curved shank makes it suited to someone who wants a ring that feels both traditional and a little unexpected.

This engagement ring began with a client designing her own piece around a stone she simply loved the color of — a soft blue kite-cut aquamarine, chosen for its uniqueness rather than any birthstone connection. The design moved through several rounds of refinement: the metal shifted from yellow to rose gold, the setting changed from a full bezel to open prongs, and the diamond accents were reworked from two simple side stones into a partial halo that traces the upper-left and lower-right edges of the kite shape. The result is an asymmetrical, modern silhouette with a low-profile plain band that lets the stone and its diamond framing carry the design. It suits someone who wanted an engagement ring with a distinct shape and color rather than a traditional round diamond solitaire.

This pendant takes the shape of a slender, twisting ribbon in white gold, with three round stones set vertically down its length. Each stone is a different December birthstone — tanzanite, blue zircon, and blue topaz — chosen so that three sisters born in the same month could each be represented by a distinct color rather than an identical set. The open, flowing form of the band lets each stone catch light independently rather than sitting in a single dense cluster. Built with a future addition in mind, the design leaves room at the base for a fourth stone to be added later without disrupting the existing arrangement or its symmetry. It hangs from a matching white gold chain, giving the whole piece a cohesive, monochrome metal finish that lets the three stone colors carry the visual interest.

This pendant renders the number 87 in a bold, polished block-number silhouette, with two horizontal bars of pave-set round blue sapphires running across the numerals — a nod to the racing decal the design was drawn from. Cast in gold-plated silver at approximately 1.5 inches tall, the piece was designed to be a wearable, occasional-use tribute rather than an everyday piece, since it will travel to dirt racing tracks. The bail at the top was sized to accommodate a standard chain so it can be worn with an existing collection rather than requiring a new one. It suits someone who wants a specific, personal number or symbol translated into a clean, dimensional pendant rather than a generic nameplate or charm.

This engagement ring centers a round lab-grown diamond flanked by two pear-shaped sapphires, chosen in a deeper blue after the client reviewed the first render. The band is 14k white gold with a bypass-inspired profile and a wavy line texture along the interior, hiding two engraved roses connected by a single stem. The design moved from an initial princess-cut concept to a round center stone during the design phase, and the sapphire tone was adjusted once more to get the color right. It suits someone who wants a three-stone ring with a personal, partly-hidden detail meant only for the wearer to discover.

This S-shaped bypass ring was rebuilt in platinum after the original — a custom piece from the 1950s — was stolen. Three round natural diamonds sit in a raised box setting at the center, with pave-set round diamonds tracing both curves of the S so no metal band is left bare. The design was refined over several rounds of sketches and 3D renders to match the client’s memory of the original as closely as possible, including a solid, gap-free profile between the stones and the band. Platinum was chosen over white gold for its durability and because it holds its white color without replating over decades of wear. The piece is intended to be worn daily and eventually passed down to a family member.

This men’s wedding band was built to mirror an existing engagement ring design, carrying the same alternating round and marquise lab diamond pattern set flush into a comfort-fit 14k white gold band. The inside is engraved with a short personal phrase and finished to a high polish for comfort against the skin, while the diamonds are matched for consistent color and clarity across every stone. A comfort-fit profile — flat outer surface, gently rounded interior — was added after the initial design phase specifically for long-term daily wearability. The result is a coordinated set piece designed to be worn every day for years to come.

This pendant reimagines a peacock in profile, its long curved neck and open tail rendered in rose gold with vivid enamel color work — a deep blue-purple body and brighter teal-aqua tail feathers, refined over several rounds of color proofing to match a photo of a real peacock in sunlight. A graduated row of small blue sapphires runs along the lower edge of the tail, with a few white accent stones marking the eye. The reverse carries old-English-style engraved initials and a private inscription, giving the piece a second layer of meaning beyond what is visible from the front. Suspended from a rose gold chain, it reads as a wearable piece of color and detail rather than a plain pendant, built specifically to be one of a kind rather than a repeat of any existing design.

This sterling silver ring reimagines a beloved grandmother’s ring using only memory and a handful of blurry photos as reference. The asymmetrical swirl design features two connected forms — one rounded, one more pointed — meeting at a bezel-set oval blue spinel that echoes the turquoise-like stone of the original. One side of the setting is covered in a cluster of raised, granulated dots, replacing what the client remembered as a textured, non-linear decorative element. The band was widened partway through the design process, which ended up improving the overall proportion of the piece. Made in sterling silver for a cost-conscious approach to a sentimental recreation, this ring suits anyone who wants to carry a piece of family history forward without needing an exact replica — an interpretation that captures the feeling of the original rather than a precise copy.

This fully three-dimensional dragon pendant was built to capture traditional Chinese dragon imagery in wearable scale — extended horns, a curled serpentine body, and a spiked tail looped back on itself. The scales along the head, neck, and coils are set with round lab-created diamonds against white rhodium-plated gold, while the rest of the body is cast in warm 14k yellow gold, creating a two-tone contrast that highlights the dragon’s form. A small pale jade bead is held securely in the dragon’s mouth, pinned in place from beneath — a detail the client considered essential to the design. The pendant went through multiple rounds of sketch revision to get the silhouette, tail shape, and proportions right before moving to the 3D model. Sized for everyday wear at approximately 1.5 inches, it suits someone who wants a bold, symbolic piece with real dimensional presence rather than a flat emblem.

This 14k yellow gold band alternates five marquise-cut natural rubies with four round natural diamonds, set across the top portion of a slim polished band that stays smooth underneath. The marquise cut was chosen to match the elongated shape of the rubies in the original piece, worked out from photos and careful comparison of stone proportions. It sits low and close to the finger, making it easy to stack or wear on its own every day. The design suits anyone who wants to bring a family piece back into daily rotation without it feeling fragile or precious to the point of being set aside.

This wedding band was built around a specific request: a nugget-textured gold surface with three small crosses raised at the center front, wide enough to read clearly without overwhelming the hand. The design went through several rounds of refinement — width, texture depth, and finish were all adjusted based on direct feedback until the band matched what the client had pictured. The texture wraps the top and sides of the band, while a smooth section is left at the back so the ring can be resized in the future without disrupting the pattern. The three crosses sit slightly raised and are left polished against the brushed nugget texture, so they stand out without needing added color or plating. Finished in 14k yellow gold with a comfort-fit interior, this band suits someone who wants a textured, symbolic wedding band that reads as deliberate rather than decorative for decoration’s sake.

This 10k yellow gold pendant depicts an eagle in flight, wings fully spread and rendered with dense, dimensional feather texture across both the body and wingspan. The talons grip a small ring, a detail carried over intentionally from the original piece. The pendant is hollow-backed to keep it lightweight despite its dimensional, sculptural form, and sized to sit close to the size of a quarter at the body with the wingspan extending beyond that. It suits anyone who wants a piece with real weight of meaning rather than a simple silhouette, and who values a design built from memory and reference photos rather than a stock template.

This is a men’s wedding band built around a signet-ring silhouette: an oval face with a brushed matte finish surrounding a bezel-set marquise diamond, sitting flush with the surface for a low-profile, catch-free feel. The shank is polished and tapers toward the back of the finger for daily comfort. Made in 10k white gold, the design went through an extensive back-and-forth process — moving from an early floating-solitaire concept to a full signet reinterpretation — before landing on proportions the wearer felt were bold and masculine enough to stand on their own, while still visually connecting to the engagement ring it was designed to complement.