Every piece here started as a real conversation with a real client, with a reason behind it, a story, and a lot of emotion. We’re not showing you a catalog. We’re showing you what’s possible, so you can design your own.
Recreated Vintage S-Curve Diamond Ring in Platinum
This S-shaped bypass ring was rebuilt in platinum after the original — a custom piece from the 1950s — was stolen. Three round natural diamonds sit in a raised box setting at the center, with pave-set round diamonds tracing both curves of the S so no metal band is left bare. The design was refined over several rounds of sketches and 3D renders to match the client’s memory of the original as closely as possible, including a solid, gap-free profile between the stones and the band. Platinum was chosen over white gold for its durability and because it holds its white color without replating over decades of wear. The piece is intended to be worn daily and eventually passed down to a family member.
Recreated Green Garnet Engagement Ring in Silver
This engagement ring recreates a lost antique piece using a round green garnet center stone bezel-set within a distinctive double halo. Radiating metal bars cross beneath the halo in an X pattern, creating a vintage, art-deco-inspired frame around the center stone. Moissanite accent stones trace both halo rings and continue partway down the shoulders of the band. The rounded silhouette of the setting was specifically adjusted during design to match the curvature of the original piece. Finished in polished sterling silver, the ring balances an antique aesthetic with a durable, budget-conscious build suited to everyday wear.
Slimmed Heirloom Ring — Engraved Band, Moissanite Center
This slender sterling silver band takes its cues from a much heavier heirloom ring, reworked into a design that reads as an homage rather than a copy. Where the original relied on wide cut-out details and a cluster of stones, this version simplifies to a single bezel-set moissanite flanked by hand-engraved leaf, chevron, and spiral motifs. The band was narrowed considerably from the original’s thickness, with the design adjusted from cut-outs to surface engraving to preserve strength at the smaller scale. It suits someone who wants a everyday-wearable connection to a family piece without replicating it stone for stone.
Recreated Swirl Engagement Ring in White Gold
This engagement ring recreates a bypass-style solitaire that was lost two decades earlier, rebuilt entirely from photographs and the wearer’s memory. A princess-cut lab diamond sits at an angle within a four-prong setting where two bands sweep past each other in a swirl motif, cast in polished 14k white gold. The design was reconstructed without an appraisal or any original paperwork, using only reference photos and an approximate stone size to guide the 3D model. It suits someone who wants a faithful recreation of a specific ring rather than a new design — a couple returning to the exact silhouette that mattered to them, brought back for a milestone anniversary.
Recreated Aquamarine & Tourmaline Drop Earrings
This two-tier drop earring design rebuilds a stolen pair as closely as possible from photographs, an old appraisal, and memory. A pear-shaped pink tourmaline sits at the top of each earring, haloed in small diamonds, connecting to a larger oval blue stone below, also framed in a diamond halo. The lower stone was custom-cut from a lab-grown material chosen specifically to achieve the aquamarine color the client remembered, since natural aquamarine in the needed size and hue proved difficult to match affordably. The setting was kept flat against the back so the earrings sit close to the ear, with the larger stone extending just below the earlobe. Both stone shapes and sizes were refined repeatedly against the original appraisal and reference photos until the proportions felt right. The piece suits someone who wants a faithful recreation of a meaningful earring pair, prioritizing color and proportion accuracy over an exact material match with the original stones.
Recreated Heirloom Ring — Silver Swirl with Blue Spinel
This sterling silver ring reimagines a beloved grandmother’s ring using only memory and a handful of blurry photos as reference. The asymmetrical swirl design features two connected forms — one rounded, one more pointed — meeting at a bezel-set oval blue spinel that echoes the turquoise-like stone of the original. One side of the setting is covered in a cluster of raised, granulated dots, replacing what the client remembered as a textured, non-linear decorative element. The band was widened partway through the design process, which ended up improving the overall proportion of the piece. Made in sterling silver for a cost-conscious approach to a sentimental recreation, this ring suits anyone who wants to carry a piece of family history forward without needing an exact replica — an interpretation that captures the feeling of the original rather than a precise copy.
Recreated Ruby & Diamond Heirloom Band in Gold
This 14k yellow gold band alternates five marquise-cut natural rubies with four round natural diamonds, set across the top portion of a slim polished band that stays smooth underneath. The marquise cut was chosen to match the elongated shape of the rubies in the original piece, worked out from photos and careful comparison of stone proportions. It sits low and close to the finger, making it easy to stack or wear on its own every day. The design suits anyone who wants to bring a family piece back into daily rotation without it feeling fragile or precious to the point of being set aside.
Recreated Gold Eagle Pendant — Family Heirloom Restored
This 10k yellow gold pendant depicts an eagle in flight, wings fully spread and rendered with dense, dimensional feather texture across both the body and wingspan. The talons grip a small ring, a detail carried over intentionally from the original piece. The pendant is hollow-backed to keep it lightweight despite its dimensional, sculptural form, and sized to sit close to the size of a quarter at the body with the wingspan extending beyond that. It suits anyone who wants a piece with real weight of meaning rather than a simple silhouette, and who values a design built from memory and reference photos rather than a stock template.
Three-Stone Oval Diamond Pendant in Platinum
This oval pendant sets three round lab-grown diamonds vertically in a milgrain-beaded frame, with a larger center stone flanked by two smaller stones above and below. The platinum setting has an open gallery visible from the side, and the bail was positioned through the top of the mount directly behind the center stone. At roughly 0.75 inches tall, it was designed to closely match the scale and proportions of a client-provided sketch rather than to exactly replicate the original piece it was inspired by. The piece suits anyone who wants a wearable three-stone design without heavy metalwork, and can be paired with a separately purchased chain in a width up to 1.5mm.
Grandmother’s Onyx Ring Recreated as Two Family Replicas
This ring recreates a family engagement ring that belonged to a client’s grandmother, rebuilt as two matching pieces from photographs and video rather than the physical original. An emerald-cut black onyx center stone sits in a white gold diamond-shaped frame with a single round diamond accent, flanked by ornate scrolling yellow gold shoulders on either side of the band. The design was refined during the render stage to bring the prong line flush against the stone and to shift the framing stone’s cut closer to the diamond-like shape seen in the original. Made in 14k yellow gold, the two rings were sized differently — one size 6 and one size 7 — so each recipient received a piece fitted to them individually. It suits someone looking to carry a piece of family history forward in a way that is wearable rather than kept in a box.
St. Thomas Map Pendant in Solid 14k Gold
This two-sided pendant was designed as a faithful recreation of a reference piece the client already owned and wanted rebuilt in solid gold. One face carries an engraved outline of St. Thomas, V.I. with the location named beneath it; the reverse carries a palm tree motif, both set within a ribbed coin-style border against a matte background field. The pendant hangs from a 20-inch curb chain fitted with a larger lobster clasp for easier daily use. Solid 14k yellow gold was chosen over a plated option specifically because the piece is intended for daily, continuous wear — plating wears thin with that kind of use, while solid gold holds its finish. The result is a compact, wearable piece that carries a specific place’s meaning in a durable, everyday form.
Rose Gold Morganite Halo Ring — Recreated Engagement Style
This engagement ring recreates a discontinued design the client’s wife once owned, rebuilt from photographs rather than an original piece in hand. An oval morganite in a soft pink hue sits at the center, surrounded by a halo of small round lab-grown diamonds. Each shoulder of the rose gold band features an infinity-inspired crossover detail, also set with diamond accents, adding movement and dimension without overwhelming the center stone. The 14k rose gold tone was chosen specifically to match the original ring’s warm color. Lab-grown diamonds were selected for the accent stones, offering the same optical and chemical properties as natural diamonds. This design suits someone who wants a distinctive, colored-stone engagement ring with a soft, romantic feel rather than a traditional colorless diamond solitaire.
Vintage Ruby & Baguette Band Reset in Platinum
This platinum band recreates the style of a 1940s-era ring using the client’s own marquise ruby and pair of tapered baguette diamonds. The three stones are set flush into the band, on a single plane, with rounded polished bars holding the baguettes to match the character of the original piece. Designed as an anniversary band meant to sit alongside an existing solitaire engagement ring, it preserves the vintage detailing of the original set while adapting the band width to properly support the flush setting. The result is a piece built to be worn daily and passed down.
Recreated Amethyst Ring — Rose Gold Lattice Band
This ring recreates a piece that had been worn for years before it was lost — a grandmother’s ring with a single marquise amethyst at the center. The original was gold; this version was rebuilt in 14k rose gold at the client’s request, with the same lattice-like texture carried across both shoulders flanking the stone. A six-prong setting holds the roughly one-carat marquise amethyst securely at center, with the geometric diamond-lattice pattern giving the shoulders dimension and shine without adding another stone. The design stays close to the original’s proportions and layout, rebuilt entirely from reference photos. It suits someone who wants a family piece back in wearable form, in a metal tone that fits how they wear jewelry today.
Recreated Heirloom Ring — Woven Gold Band, Blue Topaz
This ring was recreated from photographs of a family heirloom that had been lost. Built in 14k yellow gold, it centers a round blue topaz held in a four-prong setting, flanked on both sides by a woven, crisscross gold pattern that tapers into a smooth polished shank toward the back of the band. The design keeps the visual weight at the top of the finger while thinning out where the ring meets the hand, echoing the shape the client remembered from the original piece. It suits someone who wants a design rebuilt faithfully from limited reference material rather than a fresh, unrelated design.
Recreated Amethyst Engagement Ring — Stolen Ring Rebuilt
This engagement ring recreates a stolen original as closely as possible from photographs alone — a round amethyst center stone flanked by two pear-shaped white sapphires, set in 14k yellow gold with white gold prongs cradling the amethyst. A subtle raised ridge runs along the shoulders near the side stones, echoing a detail from the original setting, and the inside of the band carries a personal engraved phrase. The design was built from the ground up rather than from a pre-made setting, matched to the client’s original ring size and a slim band profile that mirrors the delicate feel of the piece it replaces. It suits someone who values continuity — restoring a ring that had already been part of their life for a decade rather than reinventing it.
Sunburst Halo Ring — Recreated Heirloom for a Daughter
This oval cluster ring was recreated from photographs of a ring passed down within a family, rebuilt entirely from images and memory rather than the physical piece. A marquise-cut lab diamond sits bezel-set at the center of a radiating sunburst gold frame, surrounded by a scalloped halo of round pave diamonds set in white gold for contrast against the 14k yellow gold band. The design was adjusted after the first render so the sunburst spokes read in gold rather than silver, matching the client’s memory of the original piece more closely. Its vintage cluster styling and dimensional halo make it a statement ring suited to someone who wants a piece with real family history behind it, ready to be worn daily or passed on again.
Bypass Twist Ring — Recreated Gold Infinity Design
This 14k yellow gold bypass ring features two smooth, wave-like teardrop forms that cross and interlock at the center, creating an infinity-like silhouette. The band is wide and substantial at the top, tapering to a narrower, more comfortable profile at the back. High-polish finish throughout gives the organic, sculptural shapes a fluid, continuous look. The design was recreated from memory and photographs of a ring the client had lost, with careful attention to proportion and the interplay between the two crossing forms. It suits someone who wants a bold, sculptural ring with a design language rooted in movement rather than a traditional stone-centered piece.
