Every piece here started as a real conversation with a real client, with a reason behind it, a story, and a lot of emotion. We’re not showing you a catalog. We’re showing you what’s possible, so you can design your own.
Marquise Diamond Double-Band Ring in 14k Gold
This ring recreates a design the client’s wife already owned and loved, rebuilt in 14k yellow gold with lab-created diamonds in place of the original’s lower-quality materials. The piece is built as two connected bands: a lower row fully set with small round pave diamonds, and an upper open band scattered with marquise-cut diamonds at varying heights and angles for a organic, cluster-like arrangement. The two bands are joined at one side, creating a negative-space gap that gives the ring visual lightness despite the density of stones. A hidden engraving sits on the inside of the band, placed deliberately at the split seam so it stays protected if the ring is ever resized. The result keeps the exact silhouette and stone arrangement of the original design while upgrading every material to solid gold and genuine diamonds, suited to someone who wants their everyday ring to hold up to real materials without changing the look they already fell in love with.
Diamond Station Necklace — Upgraded From Costume Chain
This station necklace upgrades a well-loved costume piece into fine jewelry, replacing its small silver beads with round lab-created diamonds set in white gold bezels along a 14k yellow gold cable chain. The diamonds are spaced evenly around the entire length of the chain rather than clustered at the front, so the sparkle continues all the way around the neck. Low-profile bezel settings keep the stones sitting close to the chain for a delicate, understated look rather than a heavy statement piece. It suits someone who wants to upgrade a favorite everyday necklace into something with lasting durability, without changing the essential character of the design they already loved.
St. Thomas Map Pendant in Solid 14k Gold
This two-sided pendant was designed as a faithful recreation of a reference piece the client already owned and wanted rebuilt in solid gold. One face carries an engraved outline of St. Thomas, V.I. with the location named beneath it; the reverse carries a palm tree motif, both set within a ribbed coin-style border against a matte background field. The pendant hangs from a 20-inch curb chain fitted with a larger lobster clasp for easier daily use. Solid 14k yellow gold was chosen over a plated option specifically because the piece is intended for daily, continuous wear — plating wears thin with that kind of use, while solid gold holds its finish. The result is a compact, wearable piece that carries a specific place’s meaning in a durable, everyday form.
Toi et Moi Heirloom Ring — Rose Gold with Diamond Cluster
This ring reimagines two heirloom stones into a single two-stone, or toi et moi, design set in 18k rose gold. A cushion cut diamond and a round cut diamond sit side by side, joined by a small cluster of round accent diamonds arranged for a floral, sunburst effect between them. The band is straight and low profile rather than tapered, keeping the focus on the stone cluster without a raised or bulky setting. A companion pendant was designed alongside the ring using the remaining accent diamonds from the same original pieces, so the two wearable pieces share one source of stones. The result suits someone who wants their existing diamonds reworked into something more reflective of their personal style than the original settings allowed.
Rose Gold Morganite Halo Ring — Recreated Engagement Style
This engagement ring recreates a discontinued design the client’s wife once owned, rebuilt from photographs rather than an original piece in hand. An oval morganite in a soft pink hue sits at the center, surrounded by a halo of small round lab-grown diamonds. Each shoulder of the rose gold band features an infinity-inspired crossover detail, also set with diamond accents, adding movement and dimension without overwhelming the center stone. The 14k rose gold tone was chosen specifically to match the original ring’s warm color. Lab-grown diamonds were selected for the accent stones, offering the same optical and chemical properties as natural diamonds. This design suits someone who wants a distinctive, colored-stone engagement ring with a soft, romantic feel rather than a traditional colorless diamond solitaire.
Double Halo Platinum Ring Set with Twisted Pave Shank
This platinum engagement ring set began as a single, structurally compromised ring — a thin pave shank that shed stones and a center stone held by insecure prongs. Working from the client’s own gemstones, sent in for scanning and measurement, the design rebuilds the setting from the ground up: a double halo cradles the round center diamond above a delicate twisted pave shank, flanked on either side by two new platinum bands set with matching pave diamonds. All three pieces were soldered into a single unit at the client’s request, so the finished ring reads as one cohesive silhouette rather than a stacked set. The band widths were matched during the design phase so every element — center shank and both outer bands — appears consistently thin and refined.
Chunky Gold Signet Ring — Upgraded From a Keepsake Original
This chunky, rectangular-top ring was remade in solid 14k yellow gold from a plastic original the client already owned and loved the look of. The flat top surface is divided by diagonal chevron grooves, with a row of five small raised gold beads running along one of the diagonal lines for texture and visual interest. The polished finish gives the piece a substantial, sculptural presence on the hand while keeping the design clean and geometric. It suits someone who wants a bold, tactile ring that reads as jewelry rather than a favor or novelty piece, sized and cast to the wearer’s exact finger.
Upgraded Pave Engagement Ring — 14k White Gold Moissanite
This engagement ring was built to closely follow the design of a costume piece the client had worn and loved, translated into 14k white gold with a 3-carat round moissanite at the center. Three rows of pavé-set round accent stones run along each shoulder of the bypass-style band, echoing the layered look of the original. The design was scanned and modeled from the client’s own ring, then refined through a render and resin review before casting. It suits someone who found a design they already love in a lower-cost version and wants that exact look rebuilt in a real, durable metal for daily wear.
Three-Stone Montana Sapphire Ring in 14k Yellow Gold
This three-stone ring pairs a round center Montana sapphire with two smaller round sapphires in a classic four-prong setting, cast in 14k yellow gold. The design was adapted from a silver ring the recipient admired but felt was too delicate for daily wear, rebuilt here in a more durable precious metal while keeping the original three-stone silhouette and blue color palette. A cathedral-style gallery beneath the center stone adds a subtle lift without increasing the profile. The result suits someone who wants a colored-stone ring with the presence of a classic engagement silhouette but without a traditional diamond center.
Skeleton Pendant Recreation in Sterling Silver
This pendant reimagines a favorite low-cost design in sterling silver — a fully three-dimensional skeleton figure hanging by both arms from a rope chain, ribs and joints rendered in raised relief. The oxidized finish settles into the recesses of the bone structure while the raised surfaces stay bright and polished, giving the piece depth and contrast that a single flat finish couldn’t achieve. Small black diamonds were added to the eye sockets after the piece was cast, giving the skull a bit of glint without changing the overall silhouette. It suits anyone who wants a bold, sculptural pendant with a dark aesthetic but wants it built to actually last — real silver and real stones instead of a costume-jewelry version.
