Daily wear

This engagement ring centers on a one-carat heart-shaped lab diamond, held in a four-prong setting at the tip and sides of the heart. The band is a continuous twist of polished platinum, with four small round diamonds set into the twist on either side of the center stone, extending the sparkle without competing with the heart shape. The design began as a more elaborate concept incorporating six birthstones for a blended family, then was simplified to keep the engagement ring focused on the center diamond, with the birthstone symbolism planned for a companion wedding band. The result is a clean, classic silhouette with a twisting band that gives it movement and texture. It suits someone who wants a heart-shaped center stone treated as the clear focal point, with just enough surrounding sparkle to frame it, in a durable platinum setting built for daily wear.

This engagement ring was designed to echo the look of a piece that belonged to the wearer’s mother, reimagined with a hexagonal step-cut center stone in a deep teal-blue hue. Round diamonds flank the center stone, while marquise-shaped clusters of small blue accent stones sit further along the band, framed with fine milgrain detail. Set in 14k white gold, the design balances the sentimental nod to the original piece with new stone choices selected for both color and durability. The result is a ring that carries forward a family connection while standing on its own as an original design.

This thin men’s wedding band is crafted in 14k white gold with a soft matte finish and a low dome profile for everyday comfort. A single small lab-grown diamond is set flush on the interior of the band, invisible when worn but a private detail he carries with him. The inside of the band also carries a short cursive engraving, adding another layer of personal meaning to a simple, understated design. At 4mm wide, the band is deliberately slim and unobtrusive, suited to someone who wants a wedding band that reads as classic from the outside while holding something meaningful on the inside.

This pendant brings together five birthstones in a single cluster composition — a large emerald and a large sapphire bezel-set at the center, surrounded by smaller emerald and aquamarine accents arranged around them like orbiting planets. Made in 14k yellow gold with a matching 18-inch box chain, the design was built specifically to represent a family: two central stones flanked by three smaller ones, each corresponding to a family member’s birth month. All stones are lab-grown, chosen for both environmental reasons and cost efficiency, with identical optical and chemical properties to their natural counterparts. The bezel settings keep every stone secure and give the cluster a smooth, rounded profile that sits comfortably at the neckline. It suits someone who wants a family piece that reads as a cohesive design rather than a simple row of stones, with enough presence to be a focal necklace without feeling oversized for daily wear.

This engagement ring set is built from three interlocking bands in 14k white gold, designed to be worn together as one piece. A 2.51-carat oval lab-grown diamond sits on a clean solitaire band, while a connected two-loop ring guard curves around it, its surface set with small lab-grown accent diamonds. The guard’s loops were shaped and rounded specifically so the design reads as an abstract form rather than an obvious letter, with no sharp points to catch on clothing or skin. The three rings slide onto the finger together, with the guard holding the solitaire centered and aligned. It suits someone who wants a personal, hidden meaning built into the structure of the ring itself rather than displayed on the surface, and who wears their jewelry every day.

This engagement ring pairs a bold elongated oval center diamond with a softly split yellow gold band, finished with a single delicate leaf engraved on each arm. Small round diamonds are set flush into the band near the point where the split meets, adding quiet sparkle without competing with the center stone. The band was built slightly thicker than a standard profile to match a ring the client already wears and loves the feel of. Designed with a low center setting in mind, the ring balances presence with everyday comfort, making it a fitting choice for someone who wants a substantial center stone without a ring that feels top-heavy.

This engagement ring reimagines a hummingbird in flight, with sculpted wing forms wrapping around a bezel-set oval lab-created ruby at the center. Small round lab-grown diamonds trace the shoulders of the band, and feather-like engraving runs along the profile for added texture. Built in 14k yellow gold with a flush, low-profile setting designed for comfortable daily wear, the ring carries a personal engraving inside the band. It was designed to echo the client’s own ring while introducing new coloring and symbolism specific to the couple.

This engagement ring centers a large oval moissanite, chosen for its brilliance and elongated shape, set above a hidden halo of small pave diamonds that adds sparkle without changing the ring’s clean silhouette from the top view. The band is a slim, straight 14k yellow gold shank, paired with platinum prongs for extra durability and a whiter contrast around the stone. A bridge area was deliberately built up slightly to allow a future wedding band to sit flush against the engagement ring. The inside of the band carries a private engraving, kept short to suit the narrow band width. This design suits someone who wants a classic solitaire look from above with a hidden layer of detail underneath, in a piece built to pair cleanly with a slim wedding band down the road.

This engagement ring combines a dark, textured center band with two polished 14k yellow gold rails on either side. The center section is cast in silver, finished matte, and plated in black rhodium to create a woven vine-and-leaf pattern that reads as a naturalistic braid running around the entire ring. A single round natural sapphire in a deep, intense blue sits bezel-set flush within the dark center, chosen so the stone integrates into the texture rather than rising above it on prongs. The three cast sections — two gold rails and the vine-textured center — are soldered together into one solid ring rather than assembled as separate moving parts. The matte finish on the center section was a late refinement, added specifically so the vine and leaf detailing would read clearly rather than disappearing into the sheen of polished metal. The result suits someone who wants a ring with real dimensional texture and a nontraditional dark-and-gold palette, without losing the durability and comfort of a standard band profile.

This 14k white gold engagement ring was designed as a self-purchase to mark a 50th birthday. The bypass band holds a round aquamarine in an open six-prong setting on one side, and a round grey pearl cupped in a wrapping metal setting on the other, creating an intentionally asymmetrical silhouette. The pearl was selected to honor a family tradition of a non-diamond engagement ring, while the aquamarine reflects the wearer’s own birth month. The result is a modern, wearable ring built from two contrasting textures and tones — the faceted brilliance of the stone against the soft luster of the pearl. It suits someone who wants a ring with personal meaning built into the design itself, not just the occasion it marks.

This mother’s ring sets two pear-shaped stones side by side, points meeting at the center so the pair reads almost like a heart when worn. A lab-grown diamond sits beside a Swiss blue topaz, each around three-quarters of a carat, held in a shared prong setting on a simple polished 14k yellow gold band. The design keeps the focus entirely on the two stones — no halo, no accent diamonds, just a clean pairing that lets the color contrast do the work. It suits someone who wants a symbolic two-stone piece that still reads as an everyday ring, easy to wear alongside other jewelry without competing for attention.

This 14k white gold eternity band was designed to be worn every day without feeling bulky. Four round gemstones — blue sapphire, green peridot, red garnet, and orange citrine — repeat continuously around the entire band rather than covering just the top half, so the pattern of color carries all the way around the finger. Each stone was kept to approximately 2mm to preserve a slim, low-profile silhouette suited to daily wear. The design favors a clean, repeating rhythm over a single focal stone, letting the four colors read as a continuous sequence rather than a cluster. It suits someone who wants a ring with genuine color and detail but doesn’t want the weight or bulk of a statement piece — a band you can wear every day and still notice the color when you look down.

This S-shaped bypass ring was rebuilt in platinum after the original — a custom piece from the 1950s — was stolen. Three round natural diamonds sit in a raised box setting at the center, with pave-set round diamonds tracing both curves of the S so no metal band is left bare. The design was refined over several rounds of sketches and 3D renders to match the client’s memory of the original as closely as possible, including a solid, gap-free profile between the stones and the band. Platinum was chosen over white gold for its durability and because it holds its white color without replating over decades of wear. The piece is intended to be worn daily and eventually passed down to a family member.

This men’s wedding band was built to mirror an existing engagement ring design, carrying the same alternating round and marquise lab diamond pattern set flush into a comfort-fit 14k white gold band. The inside is engraved with a short personal phrase and finished to a high polish for comfort against the skin, while the diamonds are matched for consistent color and clarity across every stone. A comfort-fit profile — flat outer surface, gently rounded interior — was added after the initial design phase specifically for long-term daily wearability. The result is a coordinated set piece designed to be worn every day for years to come.

This pendant reimagines a peacock in profile, its long curved neck and open tail rendered in rose gold with vivid enamel color work — a deep blue-purple body and brighter teal-aqua tail feathers, refined over several rounds of color proofing to match a photo of a real peacock in sunlight. A graduated row of small blue sapphires runs along the lower edge of the tail, with a few white accent stones marking the eye. The reverse carries old-English-style engraved initials and a private inscription, giving the piece a second layer of meaning beyond what is visible from the front. Suspended from a rose gold chain, it reads as a wearable piece of color and detail rather than a plain pendant, built specifically to be one of a kind rather than a repeat of any existing design.

This choker takes the familiar Cuban-link nameplate necklace and simplifies it down to a single geometric element: an open circle set with a single row of lab-created diamonds, centered on a solid 8mm curb chain. The chain was sourced longer than the finished length and links were removed to reach an exact 15-inch fit, worn close to the neck rather than at the collarbone. The O is stationary against the chain — the connecting links do not move — so the diamond-set edge stays protected from metal sliding across the stones during wear. Built in 14k yellow gold for warmth and solidity, this is a piece for someone who wants the presence of a heavy chain without needing it to spell anything out.

This sterling silver ring reimagines a beloved grandmother’s ring using only memory and a handful of blurry photos as reference. The asymmetrical swirl design features two connected forms — one rounded, one more pointed — meeting at a bezel-set oval blue spinel that echoes the turquoise-like stone of the original. One side of the setting is covered in a cluster of raised, granulated dots, replacing what the client remembered as a textured, non-linear decorative element. The band was widened partway through the design process, which ended up improving the overall proportion of the piece. Made in sterling silver for a cost-conscious approach to a sentimental recreation, this ring suits anyone who wants to carry a piece of family history forward without needing an exact replica — an interpretation that captures the feeling of the original rather than a precise copy.

This fully three-dimensional dragon pendant was built to capture traditional Chinese dragon imagery in wearable scale — extended horns, a curled serpentine body, and a spiked tail looped back on itself. The scales along the head, neck, and coils are set with round lab-created diamonds against white rhodium-plated gold, while the rest of the body is cast in warm 14k yellow gold, creating a two-tone contrast that highlights the dragon’s form. A small pale jade bead is held securely in the dragon’s mouth, pinned in place from beneath — a detail the client considered essential to the design. The pendant went through multiple rounds of sketch revision to get the silhouette, tail shape, and proportions right before moving to the 3D model. Sized for everyday wear at approximately 1.5 inches, it suits someone who wants a bold, symbolic piece with real dimensional presence rather than a flat emblem.

This 14k yellow gold band alternates five marquise-cut natural rubies with four round natural diamonds, set across the top portion of a slim polished band that stays smooth underneath. The marquise cut was chosen to match the elongated shape of the rubies in the original piece, worked out from photos and careful comparison of stone proportions. It sits low and close to the finger, making it easy to stack or wear on its own every day. The design suits anyone who wants to bring a family piece back into daily rotation without it feeling fragile or precious to the point of being set aside.

This wedding band was built around a specific request: a nugget-textured gold surface with three small crosses raised at the center front, wide enough to read clearly without overwhelming the hand. The design went through several rounds of refinement — width, texture depth, and finish were all adjusted based on direct feedback until the band matched what the client had pictured. The texture wraps the top and sides of the band, while a smooth section is left at the back so the ring can be resized in the future without disrupting the pattern. The three crosses sit slightly raised and are left polished against the brushed nugget texture, so they stand out without needing added color or plating. Finished in 14k yellow gold with a comfort-fit interior, this band suits someone who wants a textured, symbolic wedding band that reads as deliberate rather than decorative for decoration’s sake.

This is a men’s wedding band built around a signet-ring silhouette: an oval face with a brushed matte finish surrounding a bezel-set marquise diamond, sitting flush with the surface for a low-profile, catch-free feel. The shank is polished and tapers toward the back of the finger for daily comfort. Made in 10k white gold, the design went through an extensive back-and-forth process — moving from an early floating-solitaire concept to a full signet reinterpretation — before landing on proportions the wearer felt were bold and masculine enough to stand on their own, while still visually connecting to the engagement ring it was designed to complement.

This ring centers an oval cabochon moonstone inside a sunburst-style halo of twelve round sapphires that alternate between larger and smaller stones for a dynamic, dimensional frame. The moonstone is held with four prongs sized to secure its domed profile, while the halo stones were sourced in a pale, periwinkle-leaning blue to complement the stone’s natural undertones. The band splits into a V-shape at the shoulders before merging into a single yellow gold shank at the back, echoing the silhouette of the client’s original inspiration piece. Designed as a replacement for a delicate ring worn daily for years, this piece was built to be a long-term, everyday ring rather than an occasional-wear piece. It suits someone drawn to moonstone’s soft glow and looking for a halo design with movement and asymmetry, rather than a uniform ring of identical stones.

These daisy-shaped stud earrings turn a name into the petals of a flower. Each petal carries one hand-enameled letter in black, wrapping around a bright yellow enamel center, with two green enamel leaves finishing the stem below. Cast in sterling silver and sized to keep the lettering legible at a wearable stud scale, the design started from a hand-drawn sketch and was refined through several rounds of review before the petal color and font size were finalized. The result is a small, wearable piece that reads as a flower first and a name second — a personal detail hidden in plain sight. It suits anyone who wants a meaningful name piece that doesn’t look like a typical nameplate or monogram.

This engagement ring centers a princess-cut lab diamond, rotated on point to read as an elongated diamond shape rather than a standard square profile. V-shaped prongs anchor each corner of the stone, reinforced by a gallery rail and a cluster of marquise and round diamonds that fan out around it. Delicate yellow gold leaves extend outward from the shoulders of an otherwise white gold band, and pave diamonds continue partway down the shank. The cathedral-style setting lifts the stone for a raised, architectural profile while keeping the overall design light and floral rather than heavy. It suits someone who wanted a delicate, nature-inspired ring without an oversized presence on the hand.

This pendant takes the classic crusader shield shape and pairs it with a single black enamel cross, recessed into the polished silver surface for a clean, graphic contrast. The design was kept deliberately simple — one bold symbol rather than layered detail — with a shield outline that reads clearly at a glance. The pendant was built with a thicker profile than standard to stand up to a heavier Cuban chain, and the bail was sized specifically to fit an 7-8mm link. It suits someone who wants a faith or strength symbol that reads as bold rather than delicate, worn as a daily statement piece.

This engagement-style solitaire was built around a client-provided 2.89ct oval lab diamond, set in a flowing bypass band that curves around the stone rather than meeting beneath it. The 14k white gold is finished to a high polish, and the band narrows to a slim, comfortable profile without sacrificing durability. A four-prong basket setting lifts the oval diamond to catch light from every angle while keeping the overall silhouette modern and uncluttered. The design favors clean lines over ornamentation, letting the size and clarity of the center stone carry the piece. It suits someone who wants a solitaire that feels contemporary rather than traditional, with a setting style that reads as sculptural even though the design itself is quite simple to wear day to day.