Rainbow Gemstone Eternity Band in 14k White Gold
$$$
14k white gold, natural sapphire, natural peridot, natural garnet, natural citrine
A client wanted a ring that combined four different colored gemstones — sapphire, peridot, garnet, and citrine — set continuously around the entire band, not just across the top. She was specific about keeping it slim enough for daily wear, choosing a 2mm stone size over a thicker option so it would never feel like too much to wear every day. When it arrived, she wrote: 'It is the best ring ever and my most absolute favorite! It came out so perfectly... I wear it every day and it means so much to me.'
'This is beautiful and exactly what I wanted, Carrie, thank you!! It's perfect, what's next?' — on seeing the first render
'It is the best ring ever and my most absolute favorite! It came out so perfectly... I wear it every day and it means so much to me.' — on delivery
Quick specs
Design type
Primary Metal
Shape / Cut
Primary Stone
Accent Stones
Style
Design Complexity
Intent: Certainty
Size
Ring size 6 US (16.51mm). Band width 2mm. Stones approximately 2mm each, set continuously around full circumference.
How they made it distinctive
-
01
Four gemstone colors — sapphire, peridot, garnet, and citrine — repeat continuously around the full band rather than stopping halfway, the defining feature of a true eternity setting
-
02
2mm stone size chosen specifically to keep the ring slim enough for genuine daily wear
-
03
Stones set in a fixed repeating sequence rather than a single dominant color, so the pattern reads consistently from any angle
-
04
Sized only after every stone was set, since a true eternity band's finished dimensions can't be confirmed until the full stone circle is complete
How you'd make it yours
Stone selection: this piece uses sapphire, peridot, garnet, and citrine; a new commission could use any four-stone combination, or fewer colors for a simpler repeat
Metal: this piece is 14k white gold; the same continuous-stone design works equally well in yellow or rose gold
Stone size: this piece uses approximately 2mm stones for a slim profile; a new commission could use larger stones for more presence
Coverage: this piece is a full 360-degree eternity setting; a new commission could limit stones to the top half for a lower-cost half-eternity look
One of a kind: this exact ring was sized and set for one client's finger and stone sequence and is not reproduced — a new commission is an original piece inspired by this one, not a copy
Design changes made
Design matched the initial brief without major changes. The client held to her original 2mm stone size preference through the design phase, choosing it specifically over a thicker option to keep the ring wearable every day.
Who this is for
This is for someone who wants color and detail in their everyday ring without any added bulk. It's especially right if you want a piece that feels considered from every angle — not just a front-facing stone, but a pattern that continues all the way around, whether you're glancing down at your desk or someone catches your hand from the side.
How it's made
Once the design was approved, the team began by sourcing the four gemstone types to the exact size and quality required for a continuous eternity setting. A wax resin model was produced next — the first physical preview of the ring, shared with the client before any metal was cast. The wax models were joined into a wax tree, invested in a mold, and fired in a kiln to burn away the wax, leaving a hollow cavity. Molten 14k white gold was then cast into the mold under pressure to form the raw band.
After casting, the band was cleaned up and polished to a bright white-gold finish across its entire surface, since there are no separate matte or textured zones on this design. The four stone types were then set by hand in a repeating sequence — sapphire, peridot, garnet, citrine — continuing all the way around the band's full circumference rather than stopping at the halfway point, which is the defining structural feature of a true eternity setting.
Key note
Because the stones run the full circumference rather than only the top half, every stone had to be set before the band's finished size could be confirmed — true eternity bands are sized last, not first.
Pricing guidance
A slim four-stone eternity band in 14k white gold sits toward the lower-to-mid range for custom eternity work, since the band width and stone size were both kept small. Most of the cost comes from sourcing four separate stone types to a matching small size and then hand-setting each one continuously around the full band, rather than from the metal itself. Wider bands or larger stones move the price up quickly because of the added stone count and setting labor.
Moves price up ↑
- ↑ Increasing stone size beyond 2mm, which increases both material and setting cost across the full circumference
- ↑ Widening the band to accommodate larger stones or an additional stone color
- ↑ Upgrading from natural sapphire to a rarer or larger center-focus stone
- ↑ Choosing 18k gold instead of 14k
- ↑ Adding a matching wedding band or stacking ring designed to pair with this one
Moves price down ↓
- ↓ Reducing the number of alternating stone colors from four to two or three
- ↓ Using lab-created stones in place of natural sapphire and garnet
- ↓ Narrowing stone coverage to only the top half of the band instead of a full eternity setting
- ↓ Choosing a single stone type instead of four alternating types
- ↓ Selecting sterling silver instead of 14k white gold
Questions people ask
A true eternity setting, where stones run the full circumference, is generally durable for daily wear because the prongs are distributed evenly and the band has no unset weak points. Sapphire and garnet are both hard, daily-wear-friendly stones, while peridot and citrine are softer and can show wear over many years of contact against hard surfaces. The main consideration with a full eternity band is resizing — because stones cover the entire band, resizing is more complex than with a half-set ring and may not be possible beyond a very small range. Most wearers find a properly sized eternity band holds up well with normal daily wear.
Full eternity bands are more difficult to resize than rings with a plain back, because there is no bare metal section to add or remove material from without disturbing a stone. A resize of a full-stone eternity band is typically limited to a very small range, if it's possible at all, so it's important to confirm the size carefully before production. This is why the ring is sized only after all stones are set, once the band's true finished dimensions are known. If a significant size change is ever needed, remaking the band is usually the more reliable option.
Sapphire is the hardest of the four at 9 on the Mohs scale, making it highly resistant to scratching and excellent for daily wear. Garnet falls around 6.5–7.5 depending on variety, which is still solid for everyday use. Citrine sits at about 7, comparable to quartz, and also holds up well day to day. Peridot is the softest of the group at 6.5–7, meaning it can dull or scratch over time with heavy contact, so it benefits from a little more care than the others.
A slim eternity band with four alternating natural gemstone types in 14k white gold typically falls in the lower-to-mid range for custom eternity work. The primary cost driver is sourcing multiple stone types to a consistent small size and hand-setting each one around the entire band, rather than the gold itself. Narrower bands and smaller stones, like a 2mm setup, generally cost less than wider bands or larger stones, since there is less material and setting labor involved.
A custom eternity band with multiple stone types typically takes around five to six weeks from approved design to delivery on a standard timeline. The first week or so covers the sketch, 3D model, and render for approval. After approval, sourcing four separate gemstone types to a matching size, casting the band, and hand-setting each stone around the full circumference make up the remaining production time.
Yes, multi-stone-type bands like this one are a standard custom option, with stones typically alternating in a repeating sequence around the band. The main design considerations are stone size consistency, since all stones need to sit at a similar height and diameter for a clean look, and hardness differences between stone types, which can affect long-term wear evenness. A repeating four-stone pattern like sapphire, peridot, garnet, and citrine is a common way to combine multiple colors while keeping the design balanced.
Yes, lab-created versions are available for several of these stone types and offer the same color and optical properties as their natural counterparts at a lower cost. Lab sapphire is widely available and visually identical to natural sapphire. Lab garnet and lab citrine are less common in the market than lab sapphire, so availability and cost savings vary more by stone type. Swapping in lab-created stones is a straightforward way to reduce cost on a multi-stone design like this without changing the visual result.
Yes, 14k white gold is a common and durable choice for daily-wear rings, offering a good balance of hardness and affordability compared to higher karat golds. White gold is rhodium-plated to achieve its bright white finish, and that plating will gradually wear with daily contact, typically needing re-plating every one to two years depending on wear patterns. The underlying 14k gold itself is durable enough for continuous daily wear, including with a full eternity stone setting.
