White gold 14k

This engagement ring was designed to echo the look of a piece that belonged to the wearer’s mother, reimagined with a hexagonal step-cut center stone in a deep teal-blue hue. Round diamonds flank the center stone, while marquise-shaped clusters of small blue accent stones sit further along the band, framed with fine milgrain detail. Set in 14k white gold, the design balances the sentimental nod to the original piece with new stone choices selected for both color and durability. The result is a ring that carries forward a family connection while standing on its own as an original design.

This thin men’s wedding band is crafted in 14k white gold with a soft matte finish and a low dome profile for everyday comfort. A single small lab-grown diamond is set flush on the interior of the band, invisible when worn but a private detail he carries with him. The inside of the band also carries a short cursive engraving, adding another layer of personal meaning to a simple, understated design. At 4mm wide, the band is deliberately slim and unobtrusive, suited to someone who wants a wedding band that reads as classic from the outside while holding something meaningful on the inside.

This engagement ring set is built from three interlocking bands in 14k white gold, designed to be worn together as one piece. A 2.51-carat oval lab-grown diamond sits on a clean solitaire band, while a connected two-loop ring guard curves around it, its surface set with small lab-grown accent diamonds. The guard’s loops were shaped and rounded specifically so the design reads as an abstract form rather than an obvious letter, with no sharp points to catch on clothing or skin. The three rings slide onto the finger together, with the guard holding the solitaire centered and aligned. It suits someone who wants a personal, hidden meaning built into the structure of the ring itself rather than displayed on the surface, and who wears their jewelry every day.

These drop earrings reinterpret a celebrity-inspired tusk silhouette as a two-part design: a small front stud paired with a longer curved jacket that appears to pass through the earlobe. The jacket carries a row of pave-set moissanite stones along its inner curve, while the front hook stays smooth and polished due to its narrow, rounded profile. Cast in 14k white gold rather than silver, the design prioritizes structural integrity — the metal needed to be strong enough to hold small recessed stone settings without bending or risking stone loss. The result is a sparkling, elongated line that curves gently along the ear, with a high-polish finish designed to catch the light.

This engagement ring centers a pear-shaped lab-grown diamond set high above a hidden halo, with round moissanite accent stones tracing both sides of the polished 14k white gold band. The high-profile setting and pear silhouette give the center stone a distinct, elongated presence, while the hidden halo adds brilliance without changing the outline visible from above. The band was widened partway through design to better proportion the stone size, and the accent stones were adjusted to match. It suits someone who wants a classic pear-solitaire silhouette with extra sparkle built into the setting itself.

This 14k white gold engagement ring was designed as a self-purchase to mark a 50th birthday. The bypass band holds a round aquamarine in an open six-prong setting on one side, and a round grey pearl cupped in a wrapping metal setting on the other, creating an intentionally asymmetrical silhouette. The pearl was selected to honor a family tradition of a non-diamond engagement ring, while the aquamarine reflects the wearer’s own birth month. The result is a modern, wearable ring built from two contrasting textures and tones — the faceted brilliance of the stone against the soft luster of the pearl. It suits someone who wants a ring with personal meaning built into the design itself, not just the occasion it marks.

This pendant takes the shape of a slender, twisting ribbon in white gold, with three round stones set vertically down its length. Each stone is a different December birthstone — tanzanite, blue zircon, and blue topaz — chosen so that three sisters born in the same month could each be represented by a distinct color rather than an identical set. The open, flowing form of the band lets each stone catch light independently rather than sitting in a single dense cluster. Built with a future addition in mind, the design leaves room at the base for a fourth stone to be added later without disrupting the existing arrangement or its symmetry. It hangs from a matching white gold chain, giving the whole piece a cohesive, monochrome metal finish that lets the three stone colors carry the visual interest.

This engagement ring centers a round lab-grown diamond flanked by two pear-shaped sapphires, chosen in a deeper blue after the client reviewed the first render. The band is 14k white gold with a bypass-inspired profile and a wavy line texture along the interior, hiding two engraved roses connected by a single stem. The design moved from an initial princess-cut concept to a round center stone during the design phase, and the sapphire tone was adjusted once more to get the color right. It suits someone who wants a three-stone ring with a personal, partly-hidden detail meant only for the wearer to discover.

This 14k white gold eternity band was designed to be worn every day without feeling bulky. Four round gemstones — blue sapphire, green peridot, red garnet, and orange citrine — repeat continuously around the entire band rather than covering just the top half, so the pattern of color carries all the way around the finger. Each stone was kept to approximately 2mm to preserve a slim, low-profile silhouette suited to daily wear. The design favors a clean, repeating rhythm over a single focal stone, letting the four colors read as a continuous sequence rather than a cluster. It suits someone who wants a ring with genuine color and detail but doesn’t want the weight or bulk of a statement piece — a band you can wear every day and still notice the color when you look down.

This men’s wedding band was built to mirror an existing engagement ring design, carrying the same alternating round and marquise lab diamond pattern set flush into a comfort-fit 14k white gold band. The inside is engraved with a short personal phrase and finished to a high polish for comfort against the skin, while the diamonds are matched for consistent color and clarity across every stone. A comfort-fit profile — flat outer surface, gently rounded interior — was added after the initial design phase specifically for long-term daily wearability. The result is a coordinated set piece designed to be worn every day for years to come.

This engagement ring centers a princess-cut lab diamond, rotated on point to read as an elongated diamond shape rather than a standard square profile. V-shaped prongs anchor each corner of the stone, reinforced by a gallery rail and a cluster of marquise and round diamonds that fan out around it. Delicate yellow gold leaves extend outward from the shoulders of an otherwise white gold band, and pave diamonds continue partway down the shank. The cathedral-style setting lifts the stone for a raised, architectural profile while keeping the overall design light and floral rather than heavy. It suits someone who wanted a delicate, nature-inspired ring without an oversized presence on the hand.

This engagement-style solitaire was built around a client-provided 2.89ct oval lab diamond, set in a flowing bypass band that curves around the stone rather than meeting beneath it. The 14k white gold is finished to a high polish, and the band narrows to a slim, comfortable profile without sacrificing durability. A four-prong basket setting lifts the oval diamond to catch light from every angle while keeping the overall silhouette modern and uncluttered. The design favors clean lines over ornamentation, letting the size and clarity of the center stone carry the piece. It suits someone who wants a solitaire that feels contemporary rather than traditional, with a setting style that reads as sculptural even though the design itself is quite simple to wear day to day.

This pendant pairs a classic heart silhouette with a key motif set inside it, the key’s bow carved with a single letter. The heart’s outline is lined on both sides with pave-set lab-grown diamonds, while the key itself is left in polished white gold for contrast. At about an inch across, the piece has enough presence to read clearly from a distance while still sitting comfortably at the collarbone. It suits someone who wants a sentimental design element — an initial, a name, a private meaning — built into a piece that still reads as fine jewelry rather than novelty.

This sideways cross pendant is crafted in 14k white gold with a gentle upward curve along its length. The wearer’s name is engraved in a clean script font across the horizontal bar, and a small round emerald in a bezel setting hangs from the short end of the cross. The cross ends were rounded during the design phase for a softer look, and the pendant sits on a 16-inch cable chain sized to sit as a semi-loose choker. It suits someone who wants a personalized, faith-inspired piece that is easy to wear every day.

This pendant centers a round lab-grown emerald inside a cushion-shaped double halo of small round diamonds, connected by a single bezel-set diamond to a diamond-lined bail. The 14k white gold setting keeps the focus on the emerald’s color while the surrounding stones add brightness and structure. It suits someone who wants a colored-stone pendant with a bit of sparkle and dimension, not just a plain solitaire, and who wears pendants as an everyday or special-occasion accent piece.

This engagement ring pairs a 2-carat-class radiant cut lab diamond, set horizontally across a wide split band, with delicate moon and star engravings running along both halves of the shank. The double-band structure gives the ring a substantial, cigar-band-inspired presence without feeling overly delicate, while the celestial engraving detail adds a whimsical, personal touch. A short inside engraving is tucked into the solid back portion of the band. Made in 14k white gold, the design balances a bold silhouette with fine detail work, suited to someone who wanted a ring with real presence on the hand but didn’t want it to read as fragile or overly traditional.

This pendant depicts a small winged fairy figure rendered in polished 14k white gold, holding a single round diamond in her outstretched hand. The wings feature open cut-out detailing that catches light from multiple angles, while the figure’s pose was refined during the design phase to get the proportions and orientation just right. Made to pair with a chain the client already owned, the pendant is sized at approximately 0.75 inches to sit comfortably as a everyday piece. It suits anyone drawn to whimsical, figural pendant designs with a touch of sparkle.

This eternity band pairs two December birthstones — faceted blue topaz and cabochon-cut turquoise — set alternately all the way around a 14k white gold band. The continuous stone coverage makes it a natural stacking piece, sitting flush against other rings without an obvious front or back. Turquoise is a softer stone than most ring-set gems, so this design suits someone who wants the birthstone combination as a meaningful detail rather than a piece worn during heavy hands-on activity. The band width was kept slim at 2mm to keep the piece delicate and wearable alongside other rings.