Home Get Inspired Bracelets Two-Tone Infinity Bracelet with Heart Garnet Center

A two-tone 14k gold bracelet with a sideways infinity symbol in rose gold, pave diamonds along the curves, and a white gold bezel-set heart-shaped garnet at the center, attached to a silver-toned curb link chain on a natural stone surface.

Two-Tone Infinity Bracelet with Heart Garnet Center

$$$

14k white gold, 14k rose gold, garnet, lab diamonds

A client came back to work with a designer he'd used before, wanting a second anniversary piece built around a heart-shaped garnet inside a sideways infinity symbol. What started as a pendant idea shifted mid-design into a bracelet after he saw the finished render and pictured it differently, and the team reworked the chain connections and added a rose and white two-tone finish to match his instinct for color.

'I love the canted heart! I never would have thought of that. I love it, I'm ready to move forward.' — on seeing the first sketch

'It's perfect!' — on seeing the updated two-tone render

Start your project

Anniversary Daily wear Gift for partner

Quick specs

Design type

Bracelets

Primary Metal

White gold 14k

Secondary Metal

Rose gold 14k

Shape / Cut

Heart

Primary Stone

Garnet

Accent Stones

Diamonds

Style

Anniversary East west Heart Infinity Two-stone

Design Complexity

Moderate

Intent

A Gift That Says Everything

Intent: Certainty

High

Size

Center piece approximately 1-1.25in wide. Chain width 3.4mm curb link, 14k white gold.

How they made it distinctive

01
Sideways infinity orientation chosen over the traditional upright figure-eight for a more ribbon-like read
02
Heart-shaped garnet set at a deliberate canted angle rather than point-up or point-down, a design touch the client hadn't asked for but immediately loved
03
Two-tone construction splits the emotional center (white gold heart) from the symbolic frame (rose gold infinity)
04
Converted from a pendant to a bracelet mid-project without redesigning the centerpiece, only the chain connections
05
Back of the infinity symbol engraved with an anniversary marker, keeping the front design clean

How you'd make it yours

Stone: this piece uses a heart-shaped garnet; a new commission could use a different colored gem, moissanite, or a diamond for the center

Metal: this piece uses white and rose gold together; the same design works in a single gold tone or a white-and-yellow combination

Chain: this piece uses a 3.4mm curb link; a new piece could use a rope, figaro, or cable chain depending on preferred weight

Accent stones: this piece uses lab diamond pave; a new commission could use colored gems along the infinity curve instead

Engraving: the flat back of the infinity symbol can carry a new date, initials, or short phrase on a fresh commission

One of a kind: this exact bracelet was designed for one client's anniversary and is not reproduced — a new commission is an original piece inspired by this one, not a copy

Design changes made

The piece was originally designed as a pendant on a rope chain but was converted to a bracelet after the client saw the approved render and changed his mind, requiring new chain connection points and a switch to a curb link chain. The metal was also split into two tones, with the heart setting kept in white gold and the infinity symbol finished in rose gold.

Who this is for

This is for someone who wants an anniversary gift with a distinct silhouette rather than a standard heart charm or tennis bracelet. It fits someone who likes color in their metal choices and wants a piece that carries a small, personal design surprise, like a canted stone or a two-tone split, that they can point to and explain.

How it's made

Once the design was approved, the piece was 3D printed as a wax model, which was then attached to a wax tree and invested in plaster before being fired in a kiln to burn out the wax and leave a hollow mold. Molten 14k gold was cast into the mold for both the white gold and rose gold sections, then the pieces were cooled, extracted, and cleaned in preparation for finishing. The rose gold infinity section and white gold heart bezel were finished and joined, with the pave diamond accents set by hand along the lower curves of the infinity symbol on either side of the center stone. The heart-shaped garnet was then bezel-set into its white gold mounting, canted at an angle rather than set upright, and the piece was polished before the curb link chain sections were attached to the side loops.

Key note

The heart-shaped garnet is set at a deliberate angle rather than point-down or point-up, a canted placement the client had not requested but responded to immediately once he saw it in the first sketch.

Pricing guidance

A two-tone bracelet with a bezel-set heart-shaped colored stone and pave diamond accents along a sculpted infinity motif sits in the mid-to-upper range for custom bracelets of this complexity. Working in two gold tones adds labor because each metal section is finished and joined separately rather than cast as a single piece. Chain gauge and link style are the other major cost factors on a piece like this.

Moves price up ↑

↑
Increasing the chain gauge or switching to a heavier link style than curb
↑
Using natural rather than lab-created diamond accents
↑
Enlarging the center stone beyond two carats
↑
Adding stone accents to both sides of the bracelet rather than the center piece alone
↑
Upgrading from 14k to 18k gold in either tone

Moves price down ↓

↓
Using a single metal tone instead of a two-tone construction
↓
Simplifying the pave accent to fewer stones or a plain rose gold infinity
↓
Switching the chain to a lighter-gauge or simpler link style
↓
Using a lab-created garnet or a lower-carat center stone
↓
Converting to a single-sided design rather than a chain on both ends

Questions people ask

Can garnet handle daily wear on a bracelet?

Garnet rates about 6.5 to 7.5 on the Mohs hardness scale, which is durable enough for regular wear but softer than diamond or sapphire. Bracelets see more impact than rings or pendants because the wrist bumps against surfaces throughout the day, so a bezel setting like the one used here helps protect the stone's edges better than prongs would. Garnet does not require any special care beyond normal jewelry cleaning with mild soap and water. It's a good choice for a colored center stone as long as it's set securely, which a bezel setting accomplishes.

What's the difference between lab-created and natural diamond accents?

Lab-created and natural diamonds are chemically and optically identical — same hardness, same brilliance, same fire. The only difference is origin: one is grown in a controlled lab environment, the other is mined from the earth. For small pave accent stones like the ones used along this infinity design, lab-created diamonds are the more common choice because the visual difference to the naked eye is nonexistent. Choosing lab-created accents is purely a preference, not a compromise in quality or appearance.

Can you make a bracelet in two different gold colors?

Yes, two-tone construction is achievable but does add complexity to production. Each metal section is cast and finished separately, then joined together, rather than being cast as one continuous piece in a single alloy. This design uses white gold for the heart-shaped center setting and rose gold for the infinity symbol frame, which visually separates the two design elements. Two-tone work is common in symbolic pieces where different colors are used to distinguish different parts of the design.

How long does it take to make a custom bracelet like this?

From design approval to shipping, a piece like this typically takes around five to eight weeks, though sourcing delays for certain chain styles can extend that. The process starts with a sketch, moves to a 3D CAD model and photorealistic render for approval, and then into production — wax model, casting, finishing, and stone setting. Chain components are sometimes back-ordered depending on the specific link style requested, which can add extra time. Weekly production updates are typical during the casting and finishing stages.

Can an infinity symbol be made sideways instead of upright?

Yes, orientation is a design choice, not a structural limitation. A sideways infinity symbol reads more like a bow or ribbon shape, while an upright figure-eight orientation reads more like a number eight. Both are structurally the same shape, just rotated, so there's no difference in durability or setting security between the two orientations. The chain attachment points do need to be planned around whichever orientation is chosen.

What does a two-tone gold bracelet with a colored center stone typically cost?

A bracelet combining two gold tones, a bezel-set colored center stone, and pave diamond accents along a sculpted motif like an infinity symbol generally falls in the mid-to-upper range for custom bracelet work. The main cost drivers are the two-tone construction, which requires separate casting and finishing for each metal section, and the chain gauge and link style. Center stone size and whether the accent stones are natural or lab-created also shift the price up or down from there.

Can the back of a bracelet charm be engraved?

Yes, flat-backed sections of a bracelet centerpiece, like the back of an infinity symbol or similar charm element, can typically be engraved with a short phrase, date, or initials. The engraving is usually added toward the end of the design process, once the centerpiece shape and setting are finalized, since the engraving needs a flat, stable surface to sit on. It doesn't affect the structural integrity of the piece as long as the metal has sufficient thickness where the engraving is placed.

Can a bracelet be converted from a necklace design mid-project?

Yes, though it does require some rework. The centerpiece design typically stays the same, but the connection points on either side need to be redesigned to accommodate a chain running horizontally to a clasp rather than vertically to a bail. Chain style and gauge often need to be reconsidered too, since necklace chains and bracelet chains carry different weight and durability requirements. It's a workable change as long as it happens before the piece goes into final production.