Acrostic Daisy Stud Earrings — Name Spelled in Silver Petals
$$
Sterling silver, yellow enamel, green enamel, black enamel
A client wanted a daisy stud earring that spelled out a specific name across its petals, working from a hand-drawn sketch made with a friend. During design, the original idea of yellow petals with lettering was adjusted to silver petals with black-enameled letters once the team confirmed the tiny scale couldn't support the requested script font. When the earrings arrived, the client wrote: 'Thank you so much I can't wait to give this gift. This has been such an amazing experience.'
'looks incredible' — on seeing the resin model photo
'Thank you so much I can't wait to give this gift. This has been such an amazing experience.' — on delivery
Quick specs
Design type
Primary Metal
Primary Stone
Accent Stones
Style
Design Complexity
Intent: Certainty
Size
Stud diameter approximately 10mm; letters approximately 1mm; petals approximately 2mm.
How they made it distinctive
-
01
Daisy petals double as letterforms, spelling out a name without reading as a typical nameplate
-
02
Silver petals with black enamel lettering chosen over the original yellow-on-yellow concept once tiny scale made yellow lettering illegible
-
03
Three-color enamel work (yellow center, green leaves, black lettering) packed into a stud roughly 10mm across
-
04
Shape was refined mid-design from a rounder flower sketch to a true daisy silhouette at the client's request
-
05
Letter size held to about 1mm, requiring a simplified block font instead of the originally requested script
How you'd make it yours
Flower type: this piece uses a daisy silhouette; a new commission could use a different flower shape as the letter base
Enamel colors: this piece uses yellow, green, and black; a new piece could use different color combinations
Metal: this piece is sterling silver; the same design works in 10k or 14k gold
Style: this piece is a stud; a new commission could use a drop or dangle format for a longer name
Letter count: this piece spells a specific name; a new piece is sized and shaped around its own name or word
One of a kind: this exact pair was designed around one specific name and is not reproduced — a new commission is an original piece inspired by this one, not a copy
Design changes made
The petals were changed from yellow to silver with black enamel lettering after the team confirmed the original script font and yellow-on-yellow lettering wouldn't be legible at the required 1mm letter size. The daisy shape itself was also adjusted per the client's request for a true daisy silhouette rather than the initial rounder flower sketch.
Who this is for
This is for someone who wants a name or word worked into a piece so subtly that most people will just see a flower. It's especially right for a gift where the personalization is meant to feel like a discovery rather than the obvious point of the design.
How it's made
Once the design was finalized as a 3D model, a resin model was 3D-printed and shared with the client for a first look before any metal was committed. That resin was attached to a wax tree, invested in plaster, and fired in a kiln to burn out the pattern, leaving a hollow mold. Molten sterling silver was then cast into the mold, cooled, and the raw earrings were separated from the tree for finishing.
After casting, the petals, leaves, and centers were cleaned up and prepared for their separate enamel fills — yellow enamel in the flower center, green enamel across the two leaf shapes, and black enamel worked into the recessed letterforms across the petals so the name reads clearly against the silver. The surrounding silver surfaces were polished to a bright finish, and standard push-back posts were attached to complete each stud.
Key note
The lettering had to be simplified from the requested script font to a simpler block-style letterform because at roughly 1mm tall, the fine strokes of a script font could not be reproduced in cast metal.
Pricing guidance
A multi-color enamel stud earring with fine detail lettering like this sits in the mid range for small custom earrings. Most of the cost comes from the hand-finishing and multi-step enamel work required to fill distinct colors into very small recessed areas, not from the metal itself. Upgrading the metal or adding more enamel colors moves the price up from there.
Moves price up ↑
- ↑ Upgrading from sterling silver to 10k or 14k gold
- ↑ Adding a third or fourth enamel color instead of two
- ↑ Increasing the earring size to accommodate a longer name
- ↑ Switching to a dangle or drop style requiring additional findings and assembly
- ↑ Adding gemstone accents in place of the enamel center
Moves price down ↓
- ↓ Reducing the letter count by using initials instead of a full name
- ↓ Using a single enamel color instead of two
- ↓ Keeping the design flat rather than layered with raised petals and leaves
- ↓ Choosing a smaller overall stud size where enamel work is less intricate
- ↓ Omitting the enamel entirely for a plain polished silver finish
Questions people ask
Yes, a name can be spelled across the petals of a flower design, with one letter per petal. The main limitation is size — at a small stud scale, letters are often only about 1mm tall, which restricts how detailed or script-like the font can be. Simpler block-style letterforms tend to hold up better than delicate script at this size. Longer names may require a larger overall earring to keep the letters legible.
Enamel is a colored fill applied into recessed areas of the metal and is reasonably durable for stud earrings since they see less friction than rings or bracelets. It can fade or chip over years of wear, particularly with heavy exposure to chemicals or repeated impact. Sterling silver itself is relatively soft compared to gold, so the surrounding metal can pick up fine scratches over time. With normal care, enamel studs like this typically hold their color well for years.
A pair of custom enamel stud earrings with fine detail lettering and multiple enamel colors typically falls in the mid range for small custom pieces. The price is driven mostly by labor — the hand enamel work and the precision required to keep tiny lettering legible — rather than by the amount of metal used. Choosing gold instead of silver, or adding more enamel colors, would push the cost higher.
Yes, a design like this can be cast in 10k or 14k white or yellow gold instead of sterling silver. Gold costs more due to material price, but the enamel and lettering process works the same way regardless of metal. Some clients choose gold for better long-term durability and color retention compared to silver.
The full process typically takes about five to six weeks from approved design to finished piece. The first week or so covers the sketch and 3D render stage, where design details like font, size, and color are finalized. Production, including casting, enamel work, and polishing, generally takes another four to five weeks after the design is approved.
Font style can be requested, but very small pieces have real physical limits — a delicate script font that looks great on paper may not be reproducible at a 1mm letter height in cast metal. Simpler block letterforms tend to hold detail better at small scale. It's worth discussing the intended size early, since a larger earring can accommodate a more elaborate font.
Yes, integrating letters into a design element like flower petals is one way to spell out a name without it reading as a standard nameplate or monogram. The letters become part of the pattern rather than the main visual focus, so the piece reads first as a flower and second as a name. This approach works well for anyone who wants a hidden or personal detail rather than an obviously text-based piece.
Yes, a compact stud around 10mm with a secure push-back post is well suited to daily wear. The flat-backed stud design sits close to the ear and doesn't hang or dangle, so it's less likely to catch on hair or clothing. Sterling silver studs of this size are lightweight and comfortable for all-day use.
