Get Inspired

This engagement ring centers on a one-carat heart-shaped lab diamond, held in a four-prong setting at the tip and sides of the heart. The band is a continuous twist of polished platinum, with four small round diamonds set into the twist on either side of the center stone, extending the sparkle without competing with the heart shape. The design began as a more elaborate concept incorporating six birthstones for a blended family, then was simplified to keep the engagement ring focused on the center diamond, with the birthstone symbolism planned for a companion wedding band. The result is a clean, classic silhouette with a twisting band that gives it movement and texture. It suits someone who wants a heart-shaped center stone treated as the clear focal point, with just enough surrounding sparkle to frame it, in a durable platinum setting built for daily wear.

This engagement ring was designed to echo the look of a piece that belonged to the wearer’s mother, reimagined with a hexagonal step-cut center stone in a deep teal-blue hue. Round diamonds flank the center stone, while marquise-shaped clusters of small blue accent stones sit further along the band, framed with fine milgrain detail. Set in 14k white gold, the design balances the sentimental nod to the original piece with new stone choices selected for both color and durability. The result is a ring that carries forward a family connection while standing on its own as an original design.

This thin men’s wedding band is crafted in 14k white gold with a soft matte finish and a low dome profile for everyday comfort. A single small lab-grown diamond is set flush on the interior of the band, invisible when worn but a private detail he carries with him. The inside of the band also carries a short cursive engraving, adding another layer of personal meaning to a simple, understated design. At 4mm wide, the band is deliberately slim and unobtrusive, suited to someone who wants a wedding band that reads as classic from the outside while holding something meaningful on the inside.

This engagement ring centers a 3.03 carat marquise-cut lab-grown diamond, flanked by two pear-shaped lab diamonds set in claw prongs. The band splits into a cathedral-style V beneath the center stone, a detail refined through several rounds of design revision to achieve a delicate, twisted profile without sacrificing structural strength. Set in 18k yellow gold, the ring balances a bold center stone with an open, airy gallery underneath. The design moved through multiple iterations — prong style, side stone shape and alignment, and the shank silhouette were all adjusted based on client feedback before the final version was approved. It suits someone who wanted real input into the fine details of their ring rather than a stock setting, and who was drawn to a marquise silhouette paired with a distinctive, sculptural band structure.

This engagement ring set is built from three interlocking bands in 14k white gold, designed to be worn together as one piece. A 2.51-carat oval lab-grown diamond sits on a clean solitaire band, while a connected two-loop ring guard curves around it, its surface set with small lab-grown accent diamonds. The guard’s loops were shaped and rounded specifically so the design reads as an abstract form rather than an obvious letter, with no sharp points to catch on clothing or skin. The three rings slide onto the finger together, with the guard holding the solitaire centered and aligned. It suits someone who wants a personal, hidden meaning built into the structure of the ring itself rather than displayed on the surface, and who wears their jewelry every day.

This engagement ring pairs a bold elongated oval center diamond with a softly split yellow gold band, finished with a single delicate leaf engraved on each arm. Small round diamonds are set flush into the band near the point where the split meets, adding quiet sparkle without competing with the center stone. The band was built slightly thicker than a standard profile to match a ring the client already wears and loves the feel of. Designed with a low center setting in mind, the ring balances presence with everyday comfort, making it a fitting choice for someone who wants a substantial center stone without a ring that feels top-heavy.

This engagement ring centers a large oval moissanite, chosen for its brilliance and elongated shape, set above a hidden halo of small pave diamonds that adds sparkle without changing the ring’s clean silhouette from the top view. The band is a slim, straight 14k yellow gold shank, paired with platinum prongs for extra durability and a whiter contrast around the stone. A bridge area was deliberately built up slightly to allow a future wedding band to sit flush against the engagement ring. The inside of the band carries a private engraving, kept short to suit the narrow band width. This design suits someone who wants a classic solitaire look from above with a hidden layer of detail underneath, in a piece built to pair cleanly with a slim wedding band down the road.

These drop earrings reinterpret a celebrity-inspired tusk silhouette as a two-part design: a small front stud paired with a longer curved jacket that appears to pass through the earlobe. The jacket carries a row of pave-set moissanite stones along its inner curve, while the front hook stays smooth and polished due to its narrow, rounded profile. Cast in 14k white gold rather than silver, the design prioritizes structural integrity — the metal needed to be strong enough to hold small recessed stone settings without bending or risking stone loss. The result is a sparkling, elongated line that curves gently along the ear, with a high-polish finish designed to catch the light.

This engagement ring combines a dark, textured center band with two polished 14k yellow gold rails on either side. The center section is cast in silver, finished matte, and plated in black rhodium to create a woven vine-and-leaf pattern that reads as a naturalistic braid running around the entire ring. A single round natural sapphire in a deep, intense blue sits bezel-set flush within the dark center, chosen so the stone integrates into the texture rather than rising above it on prongs. The three cast sections — two gold rails and the vine-textured center — are soldered together into one solid ring rather than assembled as separate moving parts. The matte finish on the center section was a late refinement, added specifically so the vine and leaf detailing would read clearly rather than disappearing into the sheen of polished metal. The result suits someone who wants a ring with real dimensional texture and a nontraditional dark-and-gold palette, without losing the durability and comfort of a standard band profile.

This striking 14K yellow gold engagement ring offers a beautiful blend of organic fluidity and brilliant sparkle. At its center sits a magnificent oval-cut lab-grown diamond, showcased in a contemporary partial bezel bypass setting. The polished gold arms of the band fluidly sweep upward to contour the top and bottom curves of the oval stone, securing it with a sleek, low-profile frame.
Tucked neatly into the crook of either bypass arm is a delicate, triangular cluster of three round brilliant diamonds. These side groupings add a soft, tapered transition from the slender band to the commanding center stone.

This engagement ring centers a 2-carat elongated radiant-cut lab diamond in a classic four-prong solitaire setting, finished in warm 14k yellow gold. The band carries a subtle sculptural detail where the basket connects into the shank, leaving open negative space just behind the stone — a custom addition built from a design board the recipient herself had put together. The prongs are finished to a pointed claw shape after the stone is set, keeping the profile refined rather than bulky. It suits someone who wants a solitaire with unmistakable presence but without a busy or heavily embellished setting.

This commanding platinum engagement ring is a architectural masterpiece that seamlessly blends sharp geometric lines with fluid craftsmanship. At its heart sits a magnificent radiant-cut lab-grown diamond, beautifully flanked by a matching pair of custom-cut elongated hexagonal lab-grown diamonds that step down in scale across the finger. All three central diamonds are bound together within a low-profile, partial bezel setting that continuously outlines their silhouettes for a sleek, modern look. Adding a vibrant drop of color, a pair of fancy-cut trillion teal sapphires are tucked flush against the outer walls of the hexagonal stones, transitioning effortlessly into the wide, high-polished platinum shank. It is a bold, dignified symbol of contemporary luxury.

This engagement ring centers a pear-shaped lab-grown diamond set high above a hidden halo, with round moissanite accent stones tracing both sides of the polished 14k white gold band. The high-profile setting and pear silhouette give the center stone a distinct, elongated presence, while the hidden halo adds brilliance without changing the outline visible from above. The band was widened partway through design to better proportion the stone size, and the accent stones were adjusted to match. It suits someone who wants a classic pear-solitaire silhouette with extra sparkle built into the setting itself.

This 14k white gold engagement ring was designed as a self-purchase to mark a 50th birthday. The bypass band holds a round aquamarine in an open six-prong setting on one side, and a round grey pearl cupped in a wrapping metal setting on the other, creating an intentionally asymmetrical silhouette. The pearl was selected to honor a family tradition of a non-diamond engagement ring, while the aquamarine reflects the wearer’s own birth month. The result is a modern, wearable ring built from two contrasting textures and tones — the faceted brilliance of the stone against the soft luster of the pearl. It suits someone who wants a ring with personal meaning built into the design itself, not just the occasion it marks.

This engagement ring centers a marquise-cut moissanite in a four-prong setting, with pointed claw-style prongs shaped after the stone was set. The 14k yellow gold band curves symmetrically on both sides of the stone, tapering from about 3mm at the back to roughly 1.5mm near the center for a refined, balanced profile. The design moved from an original asymmetric bypass concept to a fully symmetrical version after the couple reviewed a printed resin model and felt the mirrored curve suited their taste better. A private engraving reading a short phrase, rendered with a heart symbol and ampersand to fit the space, sits on the inside of the band. The combination of a classic solitaire silhouette with a subtly organic, curved shank makes it suited to someone who wants a ring that feels both traditional and a little unexpected.

This engagement ring began with a client designing her own piece around a stone she simply loved the color of — a soft blue kite-cut aquamarine, chosen for its uniqueness rather than any birthstone connection. The design moved through several rounds of refinement: the metal shifted from yellow to rose gold, the setting changed from a full bezel to open prongs, and the diamond accents were reworked from two simple side stones into a partial halo that traces the upper-left and lower-right edges of the kite shape. The result is an asymmetrical, modern silhouette with a low-profile plain band that lets the stone and its diamond framing carry the design. It suits someone who wanted an engagement ring with a distinct shape and color rather than a traditional round diamond solitaire.

This mother’s ring sets two pear-shaped stones side by side, points meeting at the center so the pair reads almost like a heart when worn. A lab-grown diamond sits beside a Swiss blue topaz, each around three-quarters of a carat, held in a shared prong setting on a simple polished 14k yellow gold band. The design keeps the focus entirely on the two stones — no halo, no accent diamonds, just a clean pairing that lets the color contrast do the work. It suits someone who wants a symbolic two-stone piece that still reads as an everyday ring, easy to wear alongside other jewelry without competing for attention.

This pendant takes the shape of a slender, twisting ribbon in white gold, with three round stones set vertically down its length. Each stone is a different December birthstone — tanzanite, blue zircon, and blue topaz — chosen so that three sisters born in the same month could each be represented by a distinct color rather than an identical set. The open, flowing form of the band lets each stone catch light independently rather than sitting in a single dense cluster. Built with a future addition in mind, the design leaves room at the base for a fourth stone to be added later without disrupting the existing arrangement or its symmetry. It hangs from a matching white gold chain, giving the whole piece a cohesive, monochrome metal finish that lets the three stone colors carry the visual interest.

This engagement ring centers a round lab-grown diamond flanked by two pear-shaped sapphires, chosen in a deeper blue after the client reviewed the first render. The band is 14k white gold with a bypass-inspired profile and a wavy line texture along the interior, hiding two engraved roses connected by a single stem. The design moved from an initial princess-cut concept to a round center stone during the design phase, and the sapphire tone was adjusted once more to get the color right. It suits someone who wants a three-stone ring with a personal, partly-hidden detail meant only for the wearer to discover.

This 14k white gold eternity band was designed to be worn every day without feeling bulky. Four round gemstones — blue sapphire, green peridot, red garnet, and orange citrine — repeat continuously around the entire band rather than covering just the top half, so the pattern of color carries all the way around the finger. Each stone was kept to approximately 2mm to preserve a slim, low-profile silhouette suited to daily wear. The design favors a clean, repeating rhythm over a single focal stone, letting the four colors read as a continuous sequence rather than a cluster. It suits someone who wants a ring with genuine color and detail but doesn’t want the weight or bulk of a statement piece — a band you can wear every day and still notice the color when you look down.

This S-shaped bypass ring was rebuilt in platinum after the original — a custom piece from the 1950s — was stolen. Three round natural diamonds sit in a raised box setting at the center, with pave-set round diamonds tracing both curves of the S so no metal band is left bare. The design was refined over several rounds of sketches and 3D renders to match the client’s memory of the original as closely as possible, including a solid, gap-free profile between the stones and the band. Platinum was chosen over white gold for its durability and because it holds its white color without replating over decades of wear. The piece is intended to be worn daily and eventually passed down to a family member.

This men’s wedding band was built to mirror an existing engagement ring design, carrying the same alternating round and marquise lab diamond pattern set flush into a comfort-fit 14k white gold band. The inside is engraved with a short personal phrase and finished to a high polish for comfort against the skin, while the diamonds are matched for consistent color and clarity across every stone. A comfort-fit profile — flat outer surface, gently rounded interior — was added after the initial design phase specifically for long-term daily wearability. The result is a coordinated set piece designed to be worn every day for years to come.

This sterling silver pendant centers on two koi fish facing one another beneath the phrase “This is water,” arranged along the top of the circular frame. A vine-and-leaf border wraps the edge, and the background carries a soft matte texture that sets off the polished fish, lettering, and vine work in the foreground. The piece was refined over several rounds of feedback to get the fish symmetrical, the lettering evenly curved around the circle, and the finish contrast just right. At roughly seven-eighths of an inch across, it sits as a compact, wearable pendant on an 18-inch cable chain. It suits anyone drawn to symbolic, nature-inspired jewelry with a personal phrase at its center, and who wants a subtle two-finish look rather than an all-over polish.

This pendant reimagines a peacock in profile, its long curved neck and open tail rendered in rose gold with vivid enamel color work — a deep blue-purple body and brighter teal-aqua tail feathers, refined over several rounds of color proofing to match a photo of a real peacock in sunlight. A graduated row of small blue sapphires runs along the lower edge of the tail, with a few white accent stones marking the eye. The reverse carries old-English-style engraved initials and a private inscription, giving the piece a second layer of meaning beyond what is visible from the front. Suspended from a rose gold chain, it reads as a wearable piece of color and detail rather than a plain pendant, built specifically to be one of a kind rather than a repeat of any existing design.

This choker takes the familiar Cuban-link nameplate necklace and simplifies it down to a single geometric element: an open circle set with a single row of lab-created diamonds, centered on a solid 8mm curb chain. The chain was sourced longer than the finished length and links were removed to reach an exact 15-inch fit, worn close to the neck rather than at the collarbone. The O is stationary against the chain — the connecting links do not move — so the diamond-set edge stays protected from metal sliding across the stones during wear. Built in 14k yellow gold for warmth and solidity, this is a piece for someone who wants the presence of a heavy chain without needing it to spell anything out.