Otto Name Ring — Cut-Out Letters in 14k Yellow Gold

This band is built entirely from negative space — the letters O-T-T-O are cut directly through a solid yellow gold band rather than applied on top of it, so the name reads as an open silhouette rather than a raised inscription. The two T’s were specifically designed to share vertical lines with the band structure, creating a seamless, illusion-like transition rather than four separate applied letters. The O’s were refined during the design phase from a rounder shape into a more oval form after the client felt the initial circles looked dropped-in rather than integrated. The piece went through several rounds of sketch revisions — including a version with seven gemstones lined across the top, one for each embryo in the couple’s path to their son — before the client ultimately decided to keep the band stone-free for a cleaner look. The finished ring is a substantial 5-6mm width in polished 14k yellow gold, sized for the wearer’s hand.

more

Masonry Business Name Pendant in 14k Gold with Trowel

This pendant was built around a business name, rendered in two contrasting lettering styles — a flowing script for the company name and bold block capitals for the trade beneath it. The letters are cut out rather than set on a solid backing, giving the piece an open, dimensional feel while keeping it substantial. Cast in solid 14k yellow gold at roughly 2 by 1 inches, it carries real weight at around 12-13 grams pre-production, avoiding the thin, hollow feel that can come with lighter nameplate pieces. It suits a wearer who wants a business name worn as a visible, personal statement — substantial enough to hold up to daily wear on a thicker chain.

more

Gold Skull Pendant with Cowboy Hat and Clover Detail

This cutout-style pendant reimagines a skull motif with a dimensional cowboy hat, sandblasted texture across the jaw and cranium, and a high-polish finish on the brim and crown. A four-leaf clover rendered in green enamel sits in one eye socket, with a dark cutout in the other for contrast. A subtle star-and-stripe detail is worked into the underside of the hat brim, understated rather than bold. Cast in 14k yellow gold and sized to sit just over 1.5 inches including the bail, the piece was designed to hang from the client’s own existing chain. The combination of polished and matte surfaces across a single casting gives the design depth without requiring additional stones.

more
A yellow gold cut-out horseshoe pendant with a cursive two-letter monogram set in the center, the horseshoe in a matte finish and the monogram in high polish, on a thin cable chain.

Cut-Out Horseshoe Pendant With Monogram Initials

This pendant combines a classic horseshoe silhouette with a personalized script initial at its center, cut entirely through the metal rather than engraved on a surface. The horseshoe is given a matte finish while the initial is left high-polish, creating a visual contrast between the two elements without the need for an added border or frame. Cast in 14k gold-plated sterling silver at approximately one inch, the pendant is sized to be noticeable without being oversized. The open-cutout construction keeps the piece lightweight, and it ships ready to be strung on a chain of the wearer’s choice. It suits anyone drawn to Western-inspired symbolism paired with a personal, monogram-style touch.

more

Domed Platinum Pentacle Pendant With Interwoven Star

This platinum pendant centers on a five-pointed star, drawn with one point up and cut as open negative space within a continuous circular outline. The star’s points blend directly into the circle rather than projecting past it, and the crossing lines of the star are rendered with visible interleaving where the strokes pass over and under one another. The piece has a slight dome from center to edge, and the back is solid rather than hollow. A raised bail at the top carries a through-hole for a chain rather than a separate soldered ring. Made in platinum throughout, the pendant suits anyone who wants a symbolic geometric design built to last daily wear without a hollow cavity underneath.

more
A 14k white gold pendant featuring two 3D-cut snowflakes connected by a twisted vertical bar with a small Greek symbol at the center, hanging from a cable chain.

Double Snowflake Eternity Pendant in 14k White Gold

This 14k white gold pendant pairs two cut-out snowflakes, each catching light through their faceted negative space, joined by a twisted vertical bar. At the center of the design sits a small Greek symbol for eternity, marking the connection between the two snowflake forms. The piece was designed to hang from an existing curb chain, with the bail sized specifically to fit a 3mm width. At roughly 1.5 inches long, it reads as a deliberate, detailed statement piece rather than a delicate everyday charm, while still remaining wearable day to day. The cut-out snowflake construction keeps the piece visually light despite its vertical length, and the twisted bar adds a textural detail between the two symmetrical forms.

more

Heptagon Star Pendant in 14k Gold with Center Diamond

This pendant takes a seven-sided heptagon outline and fills it with six thin spokes that meet at a central bezel-set stone, creating a star-within-a-polygon silhouette rendered entirely in open wirework. The outer border is kept noticeably thicker than the interior spokes, giving the geometric design a clear visual hierarchy between frame and detail. Rather than hanging from a single bail, the chain is soldered to two fixed points on the heptagon’s upper edges, so the piece sits flat and centered against the chest instead of swinging or rotating. Cast in 14k yellow gold with a lab-created diamond bezel-set at the convergence point of the spokes, the design reads as clean and architectural rather than ornamental. It suits anyone drawn to geometric, minimalist design who wants a statement piece that still feels understated in everyday wear.

more
A polished 10k yellow gold cut-out fleur-de-lis pendant with a ribbed bail, hanging from a yellow gold cable chain.

Cut-Out Fleur-de-Lis Pendant in 10K Yellow Gold

This pendant takes a classic fleur-de-lis motif and reworks it into a bolder, more masculine statement piece. Cast in 10k yellow gold with a fully hollowed back, it was built to deliver a large, two-inch silhouette without the weight that size would normally carry. The bale is sized generously to fit a thicker chain, and the piece was left unstoned in a clean, polished finish after the client decided the fine detail of the design spoke for itself. It suits someone who wants a substantial, symbolic pendant that reads as strong rather than delicate — a piece for daily wear that still carries real presence.

more

Radiant Sunburst Cross Pendant in Yellow Gold

This pendant pairs a simple cross with a surrounding sunburst of radiating rays, cut out so light passes through the open design. Cast in 14k gold-plated sterling silver, it was sized down from the original 1-inch reference to a more wearable 0.75 inches to keep it from feeling oversized on the chain. The open cut-out construction keeps the piece light and gives the sunburst motif a sense of movement around the cross at its center. It suits someone who wants a faith-forward pendant with a bit of visual energy beyond a plain cross, and it arrives on its own without a chain, ready to be paired with whatever the wearer already has or chooses separately.

more
A polished 18k yellow gold cut-out pendant in the shape of the Hebrew Chai symbol, hanging from a gold cable chain, with an 18K stamp visible on the bail.

Chai Symbol Pendant in Solid 18k Yellow Gold

This pendant takes a meaningful set of Hebrew characters and renders them as a solid, cut-out design in 18k yellow gold. Sized to about an inch across — comparable to a silver dollar — the open letterforms are connected into a single cohesive piece rather than floating separately, giving it structural strength as a everyday pendant. The client supplied his own chain, so the bail was custom-sized to fit its link width and clasp. Polished to a high shine throughout, the piece reads as a clean, modern take on a traditional symbol, equally suited to being worn tucked under a shirt or shown openly on the chain.

more

Ophiuchus Zodiac Pendant with Wolf & Moon Back Design

This pendant pairs two cut-out designs on a single round disc of 14k white gold: the serpent-bearer glyph of Ophiuchus, the 13th zodiac sign, on the front, and a howling wolf silhouette beneath a crescent moon on the back. Worn on a rope chain, the piece reads as a personal symbol rather than a decorative pendant — chosen specifically because Ophiuchus falls outside the standard twelve-sign zodiac and carries particular meaning for the wearer. The wolf-and-moon design was swapped in during the design phase, replacing an initial-based engraving, and was cut through the metal in the same open style as the front glyph so both sides share a consistent visual language. At roughly an inch across, the disc is substantial enough to carry both cut-out designs clearly while remaining comfortable for everyday wear.

more

Star of David Sailboat Pendant in Enamel Silver

This pendant merges two meaningful symbols into a single geometric silhouette: a Star of David formed from the mast and rigging lines of a sailboat, with the sail panels finished in deep blue enamel against an open, cut-out silver frame. The design went through several rounds of refinement to keep the smaller negative-space details structurally sound once cast, ultimately settling at 1.5 inches to preserve the fine linework. The piece is sterling silver with a rhodium plating to keep the finish bright, worn on a silver rope chain. It suits someone who wants a personal symbol — faith and a specific passion — combined into one wearable piece rather than shown separately.

more
A gold-plated silver pendant featuring three cut-out, almond-shaped eye outlines clustered vertically, each set with a green enamel iris and a cream-colored pupil detail, hanging from a box chain.

Clustered Eye Pendant — Gold Plated with Green Enamel

This pendant takes a literary cover image and turns it into a three-dimensional, wearable cluster. Three eye shapes, each cut from gold-plated silver, overlap at different sizes and angles, with a metal frame holding green enamel in place of each iris. Rather than reproducing the artwork as a flat picture, the design separates the eyes into individual cut-out elements that cluster together the way they appeared on the original page. It hangs on an 18-inch gold-plated box chain. The piece suits anyone who wants a favorite piece of art or literature translated into a design that reads as abstract and wearable rather than literal.

more
A polished 14k white gold pendant shaped like a treble clef with a heart formed at its upper scroll, hanging from a thin cable chain against a dark background.

Treble Clef Heart Pendant in White Gold

This pendant combines a treble clef and a heart into a single continuous cut-out line, cast in 14k white gold. The design went through several rounds of refinement to hide the chain attachment behind the heart loop at the top of the clef rather than showing a visible bail through the open space — a detail that mattered enough to the client to revisit twice. It hangs on a 1.25mm cable chain with an adjustable ball mechanism, so the length can be changed between roughly 18 and 20 inches without a second chain. At about an inch tall, the piece reads as a clean, lightweight silhouette rather than a bulky statement pendant, making it suited to everyday wear for someone who wants a music-inspired design that doesn’t look heavy or busy.

more

Two-Tone Heirloom Wedding Band Recreation

This wedding band was rebuilt as a faithful recreation of a piece that had been worn for decades before it was lost. The design uses a three-part construction — yellow gold outer rails flanking a white gold center band — to recreate the original two-tone look, with the negative-space cut-out pattern reproduced from photos and memory. Recessed lines run along each yellow gold rail, and the open floral and geometric motifs alternate around the band to echo the worn original as closely as possible. At 6-7mm wide with slender rails, the design leans delicate rather than bulky, matching the client’s preference for a lighter, more refined profile than the heavier two-tone bands often seen in this style. The piece suits anyone looking to carry a family design forward without losing the handmade, slightly irregular character of a decades-old original.

more
A sterling silver pendant shaped like a hooded ghost figure holding a scythe, the ghost's face densely set with black and colorless cubic zirconia in a skull pattern, with engraved text along the hood and scythe handle, on a silver curb-link chain.

Ghost & Scythe Pendant — Hand-Set CZ Skull Design

This 2.5-inch sterling silver pendant was cut entirely from a single photo reference, reworked into an open cut-out design rather than a solid-backed plaque. A hooded skull face anchors the piece, densely paved in black and colorless CZs arranged to mimic the shading of the original image, while a scythe crosses behind it with engraved curved text along the blade and handle. A small skull sits at the base and a crowned bail finishes the top. The design balances a graphic, fandom-inspired aesthetic with genuine stone-setting detail across the face and scythe body, while leaving the engraved text areas clean and legible. It suits someone who wants a bold, conversation-starting pendant built from a specific piece of personal artwork or reference imagery, worn as a statement on a long chain.

more
A sterling silver pendant spelling 'JOYCITY' in bold block letters filled with black enamel, hanging from a cable chain on a wood surface.

Custom JOYCITY Word Pendant in Sterling Silver

This sterling silver pendant spells out a single word in a bold, custom sans-serif font, with black enamel filling the inside of each letter for strong contrast against the polished silver outline. The bail sits centered at the top of the word rather than off to one side, keeping the pendant level when worn. It hangs on a complimentary 18-inch sterling silver cable chain with a lobster clasp. The piece suits anyone who wants a word or name rendered as a clean, graphic statement piece rather than a traditional script nameplate.

more

Monogram Leaf Pendant — 18k Gold Logo Keepsake

This pendant translates a company logo into a wearable, open cut-out design in 18k yellow gold. A central letter stands at the middle of a symmetrical arrangement of stylized leaf forms, with small round diamonds bezel-set at each connection point to both secure the piece structurally and echo the logo’s original look. The design went through several rounds of refinement to balance visual fidelity to the source logo against structural security — specifically, ensuring the open leaf ends wouldn’t snag on clothing or hair during daily wear. The finished piece hangs on an 18-inch cable chain and suits anyone who wants a recognizable brand or personal mark turned into fine jewelry rather than a flat engraved or stamped version.

more

Sterling Silver Lion Head Pendant with Dreadlock Mane Detail

This pendant takes the form of a lion’s head rendered in sterling silver, with a half-dimensional cut-out design that lets the piece stand away from the chest rather than sitting flat. The mane is the focal point: a dense pattern of cord-like locks finished in matte texture, contrasting against the high-polish, fully dimensional face. At roughly three inches from crown to chin, it was sized specifically to balance visually with a thick 8mm link chain. The design went through a client-led reference process, arriving at a lion look rather than a copyrighted character piece, and the finished pendant keeps the dimensional detail and directional face the client asked for.

more

Gold Star Lapel Pin with Diamond Milestone Accents

This is an open-outline star pin, its five points formed from slim tapered bars that leave the center hollow rather than filled. Round stones — sapphires, emeralds, and lab diamonds in varying counts — are set at the inner angles of the star, with the stone combination changing from one version to the next across the set. The set was produced across two metals, sterling silver and 14k yellow gold, to distinguish between tiers. A standard pin stem and clutch closure run across the back, designed to be worn on a lapel rather than hung from a chain. It is a milestone-recognition design: a consistent base shape that is customized piece by piece through gem count and placement, so that a milestone can be read at a glance by which stones are present.

more

Onitsha Nobility Pendant in 10k Yellow Gold

This pendant takes its shape and surface pattern from a symbol of nobility tied to the Onitsha kingdom, translated into a tapered, point-down form in 10k yellow gold. A pierced cut-out pattern runs down the center of the piece, flanked on both edges by a fine diamond-cut textured border that catches light along the full length of the pendant. A simple ball-and-bail connector joins it to the wearer’s own chain. At roughly an inch long, the piece is sized to be worn as a personal, everyday symbol rather than a large statement piece, and the solid 10k gold construction was chosen specifically for long-term durability over a plated finish.

more
A circular 14k yellow gold tree of life pendant with two intertwined trunks, white rhodium-plated leaves set with multicolored gemstones, openwork roots curling into the branches, and a pearl and blue gemstone at the center, on a yellow gold cable chain.

Family Tree Pendant With 16 Birthstones in Gold

This tree of life pendant was built leaf by leaf around a real family tree. Two trunks twist around each other at the base, representing a couple, while three main branches fan out to represent their children’s families, each carrying a cluster of birthstones for that household. Smaller roots curl back up into the branches to represent extended family woven into the whole. The tree is rendered in 14k yellow gold with cut-out detailing that lets light through the piece, while the leaves are finished in white rhodium plating to create contrast against the gold branches. A mix of natural and lab-created birthstones sits inside individual leaves, with a few leaves left intentionally blank for future additions to the family. At the base of the trunk, a sapphire and a pearl mark the couple themselves. The piece is sized generously — about 40mm across — to leave room for the level of stone and branch detail the design called for, and hangs from a 16-inch anchor chain.

more

Gravestone Pendant with Ruby Flower — Silver Birthday Gift

This pendant takes the shape of a cutout gravestone, cast in sterling silver with a cracked-ground and cross motif etched into the surface. A short engraved phrase sits at the center, and a five-petal flower of rubies with a single round center stone is set into the lower right corner, framed by sculpted leaf details. The back carries a short personal engraving. Sized at approximately 1.5 inches, it was designed to hang on a narrow 2.5mm Cuban link chain. The cutout silhouette and dimensional flower give the piece a sculptural, graphic quality suited to someone who wants jewelry with a bit of edge and personal meaning built in.

more

Cut-Out Kanji Pendant in 18K Gold Plated Silver

This pendant takes a client-submitted design — Japanese kanji script — and turns it into a three-dimensional wearable piece. The background around the characters was cut away entirely, so the finished pendant is an open, skeletal outline of the script rather than a solid plate with engraving. Cast in 18k gold-plated silver with a mirror polish, it hangs from the client’s own chain via a bail sized to fit. The design reads as bold and graphic from a distance while holding fine linework up close, making it suited to anyone who wants a piece of personal or cultural significance rendered as a stand-alone sculptural object rather than a flat engraved tag.

more

Heart & Cross Pendant with Diamond and Birthstones

This heart-shaped cross pendant is crafted in 14k white gold with open cut-out detailing along the cross and heart silhouette. A round lab-created diamond sits bezel-set at the center of the heart, flanked by three small birthstones representing family members, arranged in a cluster along the heart’s curve. The piece hangs on a 20-inch 14k white gold cable chain and is engraved on the back with a short personal inscription. The open-work design keeps the piece light despite its dimensional silhouette, and the combination of a clear center stone with colored birthstone accents gives it a distinct, personal look suited to anyone wanting a family-representative piece with a religious design element.

more

Double Mars Symbol Pendant in Black Rhodium with Diamonds

This pendant is built from two overlapping circular forms, each paired with a solid directional arrow, rendered in a cut-out design and finished in black rhodium over 14k white gold. Seventy-two hand-set lab diamonds trace the outline of both rings, while the arrows were deliberately widened at the base for strength and rounded at the tips for comfort against skin. The bail was custom-sized to fit an existing adjustable chain with a wider clasp loop, so the piece could be added directly to a chain the client already wears alongside another meaningful pendant. The design went through several rounds of refinement — arrow direction, stone placement, and proportions were all adjusted based on a reference image the client provided partway through the process. The result is a compact, symbolic pendant with a deliberate orientation and a finish that reads dark gunmetal rather than true black.

more

Coral Heart Pendant Recreated in White Gold

This pendant is a direct replica of a piece of natural coral the client already owned, recreated at a smaller, wearable scale in 10k white gold. The front and back both carry the coral’s natural dimpled, porous texture, captured from reference photos of both sides of the original piece. Rather than a centered loop, the bail sits at one top corner of the heart, letting the pendant hang at a gentle angle — a deliberate choice that preserves the coral’s original heart shape without a ring interrupting its silhouette. The piece is cast flat-backed and sized at about half an inch, intentionally small and discreet. It suits someone who wants to keep a specific, tangible object close in miniature form, and who cares more about faithfulness to the original shape and surface than about a conventional symmetrical pendant setting.

more

Medieval Dragon Pendant With Four Birthstones in Black

This pendant takes the shape of a medieval, lizard-like dragon rendered in black rhodium-plated sterling silver, cut out so the open space becomes part of the design. Four round stones are set along the dragon’s wing and tail, giving the impression that the creature is cradling them rather than simply displaying them. The piece was built at a thicker gauge than a typical cut-out design specifically to hold up as a durable, long-term wearable. It comes with no chain, designed instead to be worn as a personal talisman. The design went through several rounds of refinement, moving from an early bird-like sketch toward a more reptilian, horned silhouette inspired by Norse-influenced dragon imagery.

more

Recreated Vintage Filigree Ring — Lost Heirloom Reborn

This oval-faced ring was rebuilt in sterling silver with white rhodium plating, recreating a vintage band from description and photographs alone. The face carries a scalloped, filigree-inspired border with small cut-out details where the top and bottom bands meet — a detail the client specifically recalled from the original. The rest of the shank is left smooth and solid, matching the plain band of the piece it replaces. The oval was widened slightly from the first design after the client measured against the original with a ruler, bringing the proportions closer to what she remembered. It suits anyone recreating a worn or lost ring from incomplete documentation — no appraisal, no paperwork, just memory and a willingness to refine the details until they feel right.

more

Recreated Heirloom Band — Vintage Cutout Pattern in Gold

This eternity-style band was recreated from a single aged photograph of a ring that had belonged to the client’s grandmother for over fifty years before it was stolen. The design uses two tones of 14k gold — a warmer yellow on the outer edges and a paler center — with a continuous pattern of marquise-shaped cut-outs running the full circumference of the band, each centered with a small round diamond. The piece went through several rounds of refinement after the first render, as the client worked to correct details that didn’t match her memory of the original: removing extra decorative lines, filling in gaps between the cut-out sections, and confirming the diamonds should read as round rather than any other shape. The result is a smooth, continuous band that reads as one unbroken surface rather than pieced-together sections. It suits anyone recreating a worn vintage piece from limited photographic reference, where getting the proportions and continuity of the original pattern right matters more than exact metal certification.

more

Interlocking Hearts Family Pendant in 14k Gold

This pendant takes a six-heart interlocking pattern — one the client’s wife had doodled for years — and turns it into a dimensional, cut-out gold charm. Cast in 14k yellow gold, the six open hearts are arranged in two offset rows so the whole piece reads as one continuous shape rather than six separate charms. It hangs horizontally from a cable link chain, with the chain connected at the sides rather than through a center jump ring, which keeps the pendant sitting flat and level against the chest. Each heart represents one member of the family, making the design personal without relying on engraving, initials, or birthstones to carry the meaning. The open, dimensional cut-out construction keeps the piece light despite its width, and the polished finish gives it a clean, modern look suited to everyday wear. It suits anyone drawn to a design that turns a private, familiar doodle into something wearable and permanent.

more

Cut-Out Portrait Pendant With Music Note Flourish

This sterling silver pendant was built around a client-supplied logo image, reimagined as a wearable cut-out piece roughly one inch tall. A profile bust sits at the center, paired with a box shape below and musical notes that flow upward and outward from the head. Black rhodium plating was added to the hair, box, and facial shadow areas to bring out the contrast and depth that the flat logo artwork showed. The open cut-out silhouette keeps the piece light despite its detail, and the bail was positioned through the music notes rather than the top of the head to keep the piece structurally durable on a chain. It suits someone who wants a meaningful graphic or emblem translated into a piece they can wear every day, not just display.

more

HEC Letters Pendant — 14k Gold with Diamonds and Cutout Stars

This pendant takes a three-letter monogram and renders it as a cut-out design in 14k yellow gold, roughly an inch across. Each letter of the initials is outlined with a continuous row of small round diamonds, and the open letterforms carry a star motif as an additional textured detail. The piece was designed from a logo reference the client provided, adapted so the letters could be worn as jewelry while keeping the diamond outline and the star detail he wanted. It suits anyone who wants a monogram piece with more presence than a flat nameplate — the cut-out construction and diamond edge give it dimension whether worn close or at a longer drop. The pendant is sized to pair with a chain the recipient already owns, so no chain is included.

more

Personalized Name & Number Pendant in Sterling Silver

This sterling silver pendant was designed around a name and a set of meaningful numbers, rendered in an open cut-out style rather than set against a solid background. The name runs in a flowing script across the top of a shield-shaped frame, with three large numerals cut directly through the metal below so light passes through the open spaces. The piece measures about an inch and hangs from a 16-inch cable chain. The open-cut construction keeps the pendant light to wear while giving the numerals strong visual presence, and the polished finish throughout gives it a clean, everyday-wearable look.

more

Letter C Pendant with Heart Cutout in Sterling Silver

This sterling silver pendant combines a flowing cursive capital letter with a solid circle nested into its open curve, and a small heart cut out of the circle’s center. Sized at about an inch, the design stays legible and clean at a wearable scale, with a polished finish throughout and a wheat-style chain to complete the piece. It suits anyone who wants a personal initial or name reference rendered as a simple, modern silhouette rather than a literal engraved name. The combined letter-and-heart motif gives it a bit more visual interest than a plain initial pendant while still reading clearly from a distance.

more
A 14k yellow gold cannabis leaf pendant with cut-out detailing, a matte sandblasted background, polished raised leaf petals, and a curled stem at the base, hanging from a gold cable chain.

Cannabis Leaf Pendant — 14k Gold Cut-Out Design

This pendant takes a cannabis-leaf logo and turns it into a dimensional, wearable piece in 14k yellow gold. The leaf’s individual points and vein lines are raised above a solid background that was added specifically to keep every connected detail of the design intact, rather than letting any element float free. At roughly two inches including the bail, it reads clearly as the original logo while standing up as a finished piece of jewelry. The background carries a matte, sandblasted finish that sets off the high-polish raised leaf shape, and the pendant was sized to fit an existing 18k gold chain. The design went through two rounds of sketch review before the background structure was finalized, balancing the client’s wish to preserve the logo’s exact silhouette with the practical need for every piece of metal to stay connected. It suits anyone looking to turn a specific, personal logo or symbol into a precise, long-lasting pendant rather than a generic interpretation of it.

more

Art Deco-Inspired Floral Pendant in White Gold

This rectangular pendant draws its structure from a vintage Art Deco brooch design, reworked into a 1.5-inch pendant with a hidden bail so the chain appears to emerge invisibly from behind the piece. The border is lined with pave-set diamonds inside a geometric triangle-and-line frame, with baguette diamond accents marking the top and bottom points. At the center, an openwork floral cluster is hand-finished in 14k white gold, its petals carved in metal rather than stone, with two cabochon moonstones and several cabochon blue sapphires set into the flower centers for color. The piece is finished with an 18-inch 14k white gold chain. It suits someone drawn to period-specific design language who wants a piece with real dimensional carving rather than a flat engraved surface.

more

Custom City Skyline Pendant With Engraved Name Plate

This pendant is a cut-out rectangular plate in 10k yellow gold, designed to translate a flat graphic into a dimensional piece that hangs from a wide bail built for a thicker chain. Within the frame sits a small scene — a sunglasses-wearing sun, a stylized city skyline, a cocktail glass, and a seated character wearing sunglasses and a collar tag — all rendered as raised and recessed cut-out shapes rather than engraved lines. Below the scene, the city name sits in blocky raised letters, with a second line of loose, hand-lettered script beneath it carrying a brand name. The piece went through a size revision after the first version came back heavier and more expensive than expected, with the bail and pendant both scaled down to fit a smaller personal chain while keeping the full scene legible. It suits someone who wants a brand or city identity worn as a solid, sculptural piece rather than a flat nameplate.

more

Matador & Bull Cufflinks — Recreated in Sterling Silver

These sterling silver cufflinks recreate a pair of costume-jewelry originals that broke beyond repair. Each oval face is an openwork scene of a matador with a cape facing a charging bull, cast with raised, dimensional figures against a cut-out background. The pair was produced as mirror images of each other, with the decorative tops cast separately from the toggle-and-post backs, which were soldered on afterward. The design carries a vintage, sculptural character suited to someone who wants a statement accessory with a recognizable narrative scene rather than a plain geometric cufflink.

more
A rose gold pendant featuring two cut-out block letters topped with a crown, hanging from a rose gold rope-style chain against a marbled background.

Crowned Monogram Pendant in Rose Gold

This pendant takes a personal monogram and turns it into a wearable emblem — two interlocking letters set beneath a crown, cut cleanly through 14k rose gold plated sterling silver rather than engraved onto a solid surface. The cut-out construction gives the design an open, dimensional feel instead of a flat plaque look, and the crown element adds a heraldic, shield-like quality to what would otherwise be a simple initial pendant. At approximately three-quarters of an inch, it sits as a compact, everyday-wearable piece rather than an oversized statement. A matching rose gold chain was sourced afterward so the full look reads as one continuous piece of metal from clasp to pendant. The design is well suited to anyone who wants a personal monogram piece with more presence than a plain letter charm, without moving into large or heavy territory.

more
A 14k yellow gold pendant in the outline of Brazil, with a small round blue sapphire bezel-set near the eastern coastal region, hanging from a twisted gold chain.

Brazil Map Pendant with Sapphire Accent in Gold

This pendant is cut from 14k yellow gold in the exact silhouette of Brazil, finished to a clean polish with no other ornamentation. A single round blue sapphire is bezel-set directly into the outline at the location corresponding to the state of Alagoas, marking a specific place on the map rather than serving as a generic accent. The pendant was kept to a compact .75-inch scale so it reads clearly as a map shape without becoming a bulky statement piece, and it hangs from an 18-inch 14k yellow gold twist chain. The open, wire-like outline construction keeps the piece light for everyday wear while still holding its form. It suits anyone who wants to carry a specific place — a home country, a hometown, a region tied to family — in a piece simple enough to wear daily.

more
A platinum, cut-out Celtic heart knot pendant set with a continuous row of small pave diamonds, hanging from a fine cable chain against a marble background.

Celtic Heart Knot Pendant in Platinum with Diamonds

This pendant takes the traditional Celtic heart knot — a symbol with no beginning and no end — and renders it in platinum with a fully cut-out silhouette so the interlocking loops read clearly from any angle. Round lab diamonds are pave-set along the entire knotwork pattern, following the curves of the design rather than sitting in a single cluster. The open design keeps the piece light despite the density of stones, and platinum was chosen for its durability and naturally white tone, which will not fade or require replating over time. It suits anyone drawn to Celtic symbolism who wants a piece with genuine sparkle rather than a plain engraved outline.

more