Home Get Inspired Pendants Monogram Leaf Pendant — 18k Gold Logo Keepsake

An 18k yellow gold openwork pendant featuring scrolling leaf shapes surrounding a central letter E, connected at eight points by small round diamonds, on a cable chain.

Monogram Leaf Pendant — 18k Gold Logo Keepsake

$$$

18k yellow gold, natural diamonds

A client wanted to turn his company's logo into a necklace for his wife, to mark her birthday and the business's third anniversary at the same time. The hard part was structural: the logo's leaf shapes and central letter needed to float and connect without looking bulky, so after a few rounds of rendering adjustments — including removing a connection point that looked too far from the original mark — they landed on a design with small diamonds bridging the open spaces. When it arrived, he said his wife loved it and called it a great piece, though he wished the diamonds had read a little larger and clearer in person.

'My wife loves it. I gave it to her a little earlier. Honestly, it is a great piece.' — on delivery

Start your project

Achievement Birthday Gift for partner A Gift That Says Everything Anniversary, Thank you / appreciation

Quick specs

Design type

Pendants

Primary Metal

Yellow gold 18k

Shape / Cut

Round

Primary Stone

Natural diamond

Accent Stones

Diamonds

Style

Bezel Cut out Leaf Letter initial Logo Symbolic Word text

Design Complexity

Complex

Intent

A Gift That Says Everything Anniversary, Thank you / appreciation

Intent: Certainty

High

Size

Pendant approximately 0.75-1in. Chain 18in, 1.5mm cable. Diamonds 1mm each.

How they made it distinctive

01
Central letter and surrounding leaf motifs are cut out and floating rather than engraved or raised on a solid background, giving the logo real dimension
02
Small diamonds bezel-set specifically at structural junctions, doing double duty as both design accents and reinforcement against snagging
03
Connection points were revised twice during the render stage to balance strength against staying visually true to the original logo
04
Made in 18k gold specifically for a richer, more saturated yellow than 14k would give
05
Sized to a compact 0.75-1 inch so the open framework stays wearable rather than oversized

How you'd make it yours

Center letter: this piece uses a single initial — a new commission could use a different letter, a short word, or a different symbol

Stone placement: this piece uses diamonds only at structural junctions — a new design could use more, fewer, or differently placed stones

Metal: this piece is 18k yellow gold — the same open cut-out language works in 14k yellow gold, white gold, or rose gold

Stone size: this piece uses 1mm diamonds — a new commission could use larger stones for more visible sparkle

Chain: this piece uses an 18-inch cable chain — a new piece could use a different length or chain style

One of a kind: this exact pendant was designed around one client's company logo and is not reproduced — a new commission is an original piece inspired by this one, not a copy

Design changes made

The connection points between the leaf shapes were reworked twice: first adding a bezel-set diamond junction above the leaf tips to prevent snagging, then removing a leaf-to-leaf connection entirely after the client felt it strayed too far from the original logo. The final design uses small diamonds only at the junctions the client approved.

Who this is for

This is for someone who wants a meaningful mark, like a company logo or personal symbol, turned into something that reads as real jewelry rather than a flat stamped emblem. It's especially right if the mark has multiple separate design elements that need to be engineered to hold together securely while still looking light and open.

How it's made

Once the layout was approved through a technical sketch and then a 3D render, a resin model was 3D-printed as the direct precursor to casting — the client was sent a photo of this resin stage partway through production. The resin was invested in plaster, burned out, and 18k yellow gold was cast into the resulting mold, producing the open cut-out framework of the logo in solid metal. After casting, the pendant was cleaned up and the cut-out edges were finished and polished to a bright shine throughout, since the design has no matte or textured zones. The small round diamonds were then bezel-set individually into the junctions connecting the leaf motifs to the central letter and to each other, a sequence chosen specifically to reinforce the thin open framework against everyday snagging.

Key note

The diamonds in this piece aren't purely decorative — they're structural, bezel-set at the exact junctions engineered to keep the open leaf-and-letter framework from flexing or catching during wear.

Pricing guidance

A complex cut-out logo pendant with multiple bezel-set diamonds in 18k gold sits in the mid-to-upper range for custom pendant work. Most of the cost comes from the engineering and CAD time needed to make an open, multi-point design structurally sound, plus the labor of setting several small stones individually rather than in a single cluster. Metal karat and diamond count are the next biggest levers on price.

Moves price up ↑

↑
Increasing the number or size of the bezel-set diamonds at the junctions
↑
Upgrading from 18k to platinum for the structural framework
↑
Adding a matte or textured finish zone that requires extra finishing steps
↑
Enlarging the pendant beyond 1 inch, which increases metal weight and setting complexity
↑
Using higher clarity or larger diamonds that are more noticeable at a glance

Moves price down ↓

↓
Reducing the number of diamond connection points and using soldered metal links instead
↓
Choosing 14k gold instead of 18k
↓
Simplifying the logo to fewer open cut-out elements
↓
Using a single bezel-set stone instead of multiple small diamonds
↓
Omitting stones entirely and relying on engraved or raised detail instead

Questions people ask

Can you turn a company logo into a pendant necklace?

Yes, a logo can be translated into a dimensional pendant rather than a flat engraved or printed version. The process usually starts with a technical sketch based on the logo image, followed by a 3D render so you can see exactly how the open or raised elements will look before anything is cast. Complex logos with multiple disconnected shapes, like letters and separate decorative elements, often need small connecting points — metal links or bezel-set stones — to hold everything together structurally. This adds some design time upfront but produces a far more refined result than a stamped or engraved logo.

How durable are tiny bezel-set diamonds on a cut-out pendant?

Bezel settings are one of the most secure ways to hold a small stone because the metal wraps fully around the stone's edge rather than relying on prongs. On an open cut-out design like this, bezel-set diamonds at the connection points also do double duty as structural reinforcement, helping prevent the thin metal framework from flexing during daily wear. The tradeoff with very small stones, typically 1mm or under, is that they can be difficult to see clearly with the naked eye even though they're genuine diamonds. If visible sparkle matters more than structural reinforcement, slightly larger stones are worth discussing upfront.

What is the difference between 14k and 18k yellow gold for a pendant like this?

18k gold contains 75% pure gold compared to 14k's 58.3%, which gives it a noticeably richer, more saturated yellow color. 18k is also slightly softer than 14k, though for a pendant that isn't subjected to the daily impact a ring would see, this is rarely a practical concern. The choice mostly comes down to preferred color depth and, to a smaller extent, cost, since 18k uses more gold per gram of the finished piece. Both karats are suitable for cast, detailed designs like an open cut-out logo.

What does a custom logo pendant like this typically cost?

A pendant of this complexity, with an open cut-out design, multiple structural diamond connections, and 18k gold, sits in the mid-to-upper range for custom pendant work. The price is driven mainly by the CAD and engineering time required to make a multi-piece open design hold together, plus the labor of setting several stones individually. Simpler versions of the same idea, using fewer connection points or a single stone, bring the cost down meaningfully.

How long does it take to make a custom pendant from a logo or image?

Design typically takes one to two weeks, covering a technical sketch and then a 3D photorealistic render, with revisions as needed until the client approves it. Once the design is approved and production funded, casting and finishing typically take an additional three to four weeks. More complex structural designs, like an open framework needing multiple diamond-set connection points, can take a bit longer on the design side since the render often goes through more than one round of adjustment.

Can jewelry be shipped without obvious branding so it stays a surprise?

Yes, custom jewelry orders can typically be shipped in plain packaging without exterior markings that would suggest the contents, and without the maker's name appearing on the outside of the box. Standard courier tracking and signature requirements still apply regardless of packaging choice. Some services also offer holding a package at a local pickup facility instead of delivering to a home address, which can help preserve a surprise if someone else might intercept mail at that address.

Can the diamonds in a piece like this be made more noticeable?

Yes, noticeability comes down to stone size and, to a lesser extent, placement and cut. Very small diamonds, such as 1mm stones, are genuine and add sparkle under the right light, but they can be easy to overlook at a glance, especially set flush within a bezel rather than raised in prongs. Moving up even slightly in millimeter size, or choosing a cut that catches more light, makes a meaningful visible difference without changing the overall design. This is worth discussing at the design stage if visible sparkle is a priority over a subtle accent look.

Can a pendant like this be made with a different letter or initial in the center?

Yes, a center letter or initial is a straightforward element to change on a new commission, since it's typically modeled as a separate component within the overall framework. The surrounding decorative elements, like the leaf motifs in this design, can stay the same or be adjusted to fit a different word or symbol. Font style for the letter is also flexible and can be matched to a specific brand mark or chosen fresh.