Every piece here started as a real conversation with a real client, with a reason behind it, a story, and a lot of emotion. We’re not showing you a catalog. We’re showing you what’s possible, so you can design your own.
Engraved Silver Sword Pendant With Peridot Hilt Stone
This sword pendant was designed as an engagement-season gift, built around a knight’s-sword silhouette with a gently curved crossguard and a rope-twisted grip. A round peridot sits bezel-set at the center of the guard, and the blade carries an engraved date with a small heart detail. The bail is formed from the top of the hilt itself, so the chain attaches directly to the pendant’s structure rather than through a separate jump ring — a deliberate choice for anyone who works with their hands and needs jewelry that can take daily wear without extra points of failure. Filigree scrollwork echoes across the guard, and the piece is sized on the smaller side for a subtle, wearable statement rather than an oversized costume piece.
Dimensional Key Pendant in Platinum with Fire Opal Eye
This pendant takes the shape of a key with a distinctive silhouette: two curved, horn-like wings flank a circular center where a round fire opal sits like an eye, catching red-orange flash against the polished platinum. The lower half tapers into stylized key teeth, and the whole piece was built with real dimension and roundness rather than a flat engraved surface. Cast in solid platinum for durability and weight, the pendant was designed at a size that reads clearly at a distance without feeling oversized. The bail was custom-sized to fit a slim 2.4-3mm chain so it could be worn on an existing necklace. It suits someone who wants a fantasy or symbolic design rendered with real jeweler’s dimension and craftsmanship rather than a flat pendant.
Men’s Diamond Wedding Band — White Gold Anniversary Ring
This men’s wedding band was designed to capture the look of a specific ring the client had admired for months, rebuilt from scratch in 14k white gold. A half-carat round lab diamond sits at the center, flanked on either side by rows of smaller round diamonds for a total weight of three-quarters of a carat. Milgrain beading traces the stepped edges of the setting, giving the piece a finished, detailed edge without adding bulk. The band is substantial and comfortable for daily wear, with a polished finish throughout. The inside of the band carries a personal engraving, added at no extra cost as part of the design. Built heavier and more durable than a mass-produced equivalent, this band suits someone who wants a distinctive, well-made piece rather than an off-the-shelf ring — especially fitting as a wedding band with meaning attached to it beyond the design itself.
Doe and Crescent Moon Pendant — Silver Anniversary Gift
This pendant centers a dimensional doe standing within an open, branch-framed silhouette, with a crescent moon caught on one of the branches above her. The teardrop shape reads as a small nature scene rather than a flat charm, with leaf detailing carved along the border and open space left where the design was intentionally opened up to let the 3D elements stand out. The back carries a short engraved inscription and a date, kept small enough to stay legible without competing with the front. Made in sterling silver on an 18-inch cable chain, it suits anyone who wants a nature motif with genuine dimension rather than a flat engraved disc, and who values a personal detail tucked out of sight on the back.
Zodiac Rat & Lotus Wedding Band in Red Enamel Gold
This wide men’s band was built around a Chinese zodiac rat and lotus flower motif, rendered in raised 14k yellow gold detail against a deep red enamel background. The design repeats symmetrically around the band, with lotus roots trailing into decorative filigree to fill the space evenly. A smooth section was left on the interior back of the band to allow for future resizing without disturbing the enamel pattern, and a private inscription is engraved on the inside. The combination of cultural symbolism, dimensional metalwork, and enamel color makes this a piece with real personality for a wearer who wants something distinctive but still wearable every day.
Three-Stone Hammered Yellow Gold Anniversary Ring
This ring was built around a deliberately non-traditional silhouette: a wide, funnel-shaped 18k yellow gold band with a hand-hammered texture, topped by three elongated cushion-cut lab diamonds bezel-set so they appear to sit on the band rather than sink into it. The center stone is roughly a third larger than the two side stones, creating a graduated, sculptural top line without traditional prongs or points. The bezel walls were shaped with sharp, chimney-like transitions rather than rounded shoulders, giving the setting a modern, architectural edge. The wide top tapers to a narrower, smooth band at the back for comfort and a lighter overall feel. It suits someone who wants a substantial, sculptural anniversary ring with a distinctly modern silhouette rather than a classic three-stone shape.
Infinity Anniversary Pendant with Aquamarine & Sapphire
This platinum pendant centers an oval lab-created diamond beneath a small infinity-shaped twist set with two round stones — an aquamarine and a sapphire, representing March and September birthstones. The design went through a late adjustment: a halo of alternating stones around the center diamond was dropped in favor of a cleaner, quieter look, letting the diamond and the twist motif carry the piece. It hangs on a fine 1.5mm platinum cable chain sized to sit at approximately 3/4 inch. The result is a piece with meaning built into the details rather than announced by size — suited to someone who wanted an anniversary piece that reads as elegant and personal rather than elaborate.
Interlocking Crescent Moon Pendants in Sterling Silver
This two-piece pendant set pairs a larger crescent moon for him with a smaller crescent for her, both cast in sterling silver with a high-polish finish. Her pendant carries the design’s only gemstones — a round amethyst paired with a smaller red accent stone — set into the lower curve of the crescent. His pendant is worn solo, while the two crescents are designed to sit together, nesting into the shape of a full moon when placed side by side. Each piece hangs on its own sterling silver cable chain sized to the wearer. The design translates a couple’s shared symbol into two individually wearable pieces that only complete their intended shape when together.
Two-Tone Braided Twist Ring with Montana Sapphire
This ring pairs a hand-cast rose gold twist with white gold outer rails, built as a low-profile, durable everyday band. A round Montana sapphire sits in a white gold bezel at the center, flanked by five small birthstones representing the couple and their three children. A smooth, unpatterned section is built into the back of the band, making future resizing simpler despite the layered construction. The design was adapted from the couple’s original three-metal wedding band concept, simplified to keep the labor and cost within budget while preserving the twisted, two-tone look.
Amethyst Three-Stone Anniversary Ring in Gold
This ring pairs an oval-cut amethyst center stone with a single small round clear accent stone on either side, set in a polished gold-plated sterling silver band. The design was inspired by a reference photo of a three-stone ring style, adapted to feature February’s birthstone at the center. The four-prong setting keeps the amethyst secure while showing off its color and clarity. It’s a straightforward, wearable design suited to someone who wants a birthstone ring with a bit of sparkle on the sides without an elaborate build.
Engraved Silver Bangle — Cursive Love Note Bracelet
This sterling silver bangle bracelet is engraved on both the outer and inner surfaces with cursive script, carrying a personal anniversary message from one partner to another. The band is a slim 6mm width, finished with a high polish so the flowing engraved text reads clearly against the metal. The continuous circular bangle form is a closed design with no clasp, keeping the focus entirely on the wraparound inscription rather than any decorative stonework. It suits someone who wants a wearable, everyday piece that carries a private, personal message rather than an overt design statement.
East-West Sapphire Ring in Platinum — Anniversary Design
This platinum ring centers on a substantial cushion-cut blue sapphire, supplied by the client and set in an east-west orientation inside a four-prong basket. The band tapers from a fuller 3mm at the top down to just under 2mm near the base, keeping the overall profile refined despite the scale of the center stone. The support between the shank and the basket was refined during design review, blending the transition for a cleaner line while preserving the structure that protects the stone. A short inscription is engraved on the interior of the band. The design suits someone who wants a bold, statement-making center stone presented with restraint rather than heavy ornamentation, and who is comfortable removing the ring for higher-impact activities.
