
Cut-Out Horseshoe Pendant With Monogram Initials
$
14k gold-plated sterling silver
A client wanted a horseshoe pendant with his initials worked into the center, based on a photo he had in mind. After the first render, he asked about adding texture — the design was refined over a few rounds until he landed on a matte horseshoe with a high-polish script initial standing out in the middle.
Quick specs
Design type
Primary Metal
Primary Stone
Accent Stones
Design Complexity
Intent: Certainty
Size
Pendant approximately 1 inch (25.4mm). No chain included.
How they made it distinctive
-
01
Cut-out construction: the horseshoe and the script initial are cut from a single flat piece of metal rather than engraved or layered on top
-
02
Two-tone finish: matte horseshoe paired with a high-polish initial for contrast, without requiring an added frame
-
03
Script-style initial chosen specifically to stand out from the surrounding matte horseshoe shape
-
04
Sized at approximately one inch for visibility without being oversized
How you'd make it yours
Initial/letter: this piece uses a script 'R' and 'C' monogram style — a new commission could use any letter, font, or a full monogram
Metal: this piece is 14k gold-plated sterling silver — the same design works in solid 10k or 14k gold, or white/rose gold
Finish: this piece uses a matte horseshoe with high-polish initial — a new commission could use a single uniform finish instead
Size: this piece is sized at approximately one inch — a new commission is sized to the wearer's preference
One of a kind: this exact pendant was designed for one client's initials and is not reproduced — a new commission is an original piece inspired by this one, not a copy
Design changes made
The client requested a mixed finish after seeing the initial render, and considered a raised polished border before the jeweler advised that a frame would not suit this design. He settled on a matte horseshoe with a high-polish initial instead, which added no change in cost.
Who this is for
This piece is for someone who wants a personal symbol they can wear every day without it feeling like a generic nameplate. It's especially right if you're drawn to Western or horseshoe imagery but want your own initials worked into the design rather than a plain charm.
How it's made
Once the finish and design were approved, the pendant was modeled digitally and printed in wax using a 3D printer. The wax model was attached to a tree and set in a flask, which was then placed in a kiln to burn out the wax and leave a hollow mold. Molten 14k gold-plated sterling silver was cast into the mold, and once cooled, the raw pendant was removed and prepared for finishing.
After casting, the horseshoe body was given a matte finish while the script initial at the center was left high-polish, creating contrast between the two elements without any added framing. The cut-out sections — both the open center and the small square perforations along the sides — were cleaned up by hand to keep the edges crisp. The piece was then plated and inspected before shipping.
Key note
The pendant's horseshoe shape and initial were cut from a single piece of metal rather than built as separate layers, which is why a raised polished border could not be added without redesigning and enlarging the piece.
Pricing guidance
A cut-out initial pendant like this one sits toward the lower end of the price range for custom pendants, largely because the design is a single flat-plane cutout rather than a dimensional or multi-layer piece. Most of the cost comes from the modeling and the two-step finishing process. Metal choice is the biggest lever on price for a design like this.
Moves price up ↑
- ↑ Upgrading from gold-plated silver to solid 10k or 14k gold
- ↑ Adding a raised polished border or frame, which requires enlarging the design and using more metal
- ↑ Increasing the pendant size beyond one inch
- ↑ Adding stones or additional cut-out detailing to the design
Moves price down ↓
- ↓ Simplifying to a single uniform finish rather than a two-tone matte/polish combination
- ↓ Reducing the pendant to a smaller size
- ↓ Choosing a thinner gauge of metal
- ↓ Omitting the side cut-out details (nail holes) for a simpler silhouette
Questions people ask
This pendant is made from 14k gold-plated sterling silver, which gives the look of solid gold at a lower material cost. The plating is a thin layer of 14k gold applied over a sterling silver base. With regular wear, plating gradually thins over time, especially in high-contact areas, and can eventually be re-plated by a jeweler. Solid 10k or 14k gold is also available for anyone who wants a piece that does not require re-plating.
Yes, cut-out initial designs like this one are a common request. The initial and the surrounding shape — in this case a horseshoe — are cut from a single flat piece of metal rather than engraved on the surface. This keeps the piece lightweight and gives it an open, airy look compared to a solid pendant with surface engraving. The script style and size of the initial can be adjusted to fit the design.
A single-layer cut-out pendant like this one falls toward the lower end of custom pendant pricing, since it does not require dimensional modeling or multiple cast pieces. The primary cost drivers are the digital design work and the two-step finishing process. Metal choice has the largest effect on price — gold-plated silver is on the lower end, while solid gold increases the cost significantly.
A custom pendant like this typically takes about three to four weeks to produce once the design is approved and finalized. The process starts with a 3D digital model, which is then 3D-printed in wax, cast in metal, and hand-finished. Design approval itself can take longer depending on how many rounds of revisions are needed before the client is satisfied.
Yes, combining a matte finish on one part of a pendant with a high-polish finish on another is a straightforward request for most flat cut-out designs. The two finishes are applied in separate steps after casting to create contrast between design elements. This works best when the two areas are clearly separated, such as an outer shape versus an inner letter or symbol, rather than requiring a raised border to divide them.
This particular pendant was made without a chain, as the client already planned to source one separately. The pendant's bail is sized to accommodate a standard chain, and the wearer can choose the chain width and length that suits their preference. If a chain is needed, it can be added as part of the order and sized to fit the bail opening.
It depends on the specific design. For some cut-out pendants, a raised polished border can be added, but this typically requires enlarging the overall piece and increases the amount of metal used. For a design like this horseshoe pendant, where the shape itself is already a thin cut-out silhouette, a frame was determined not to work without redesigning the piece from scratch. A jeweler can advise on a design-by-design basis whether a border is structurally feasible.
A horseshoe paired with a personal initial works well as a piece that combines a recognizable symbol with a personal touch. The horseshoe shape carries broad associations with luck and Western style, while the initial makes the piece specific to one person. This combination makes it a flexible option for a personal milestone, a gift, or simply a piece someone wants to wear for themselves.
Explore Similar Creations
Every masterpiece starts with a spark. Explore how our clients raw ideas - sketches, heirlooms, inspirations - were transformed into bespoke works of arts.
Your vision. Your design. Your piece.
Create a custom jewelry piece that celebrates you - free to begin.
