Minimal

These drop earrings reinterpret a celebrity-inspired tusk silhouette as a two-part design: a small front stud paired with a longer curved jacket that appears to pass through the earlobe. The jacket carries a row of pave-set moissanite stones along its inner curve, while the front hook stays smooth and polished due to its narrow, rounded profile. Cast in 14k white gold rather than silver, the design prioritizes structural integrity — the metal needed to be strong enough to hold small recessed stone settings without bending or risking stone loss. The result is a sparkling, elongated line that curves gently along the ear, with a high-polish finish designed to catch the light.

This choker takes the familiar Cuban-link nameplate necklace and simplifies it down to a single geometric element: an open circle set with a single row of lab-created diamonds, centered on a solid 8mm curb chain. The chain was sourced longer than the finished length and links were removed to reach an exact 15-inch fit, worn close to the neck rather than at the collarbone. The O is stationary against the chain — the connecting links do not move — so the diamond-set edge stays protected from metal sliding across the stones during wear. Built in 14k yellow gold for warmth and solidity, this is a piece for someone who wants the presence of a heavy chain without needing it to spell anything out.

This pendant takes the classic crusader shield shape and pairs it with a single black enamel cross, recessed into the polished silver surface for a clean, graphic contrast. The design was kept deliberately simple — one bold symbol rather than layered detail — with a shield outline that reads clearly at a glance. The pendant was built with a thicker profile than standard to stand up to a heavier Cuban chain, and the bail was sized specifically to fit an 7-8mm link. It suits someone who wants a faith or strength symbol that reads as bold rather than delicate, worn as a daily statement piece.

This sideways cross pendant is crafted in 14k white gold with a gentle upward curve along its length. The wearer’s name is engraved in a clean script font across the horizontal bar, and a small round emerald in a bezel setting hangs from the short end of the cross. The cross ends were rounded during the design phase for a softer look, and the pendant sits on a 16-inch cable chain sized to sit as a semi-loose choker. It suits someone who wants a personalized, faith-inspired piece that is easy to wear every day.

This lapel pin takes the shape of a single capital letter D, rendered as an open wireframe rather than a solid plate. The line work is kept uniform in thickness throughout the curve, giving the letter a clean, drafting-line quality rather than a bold monogram look. Cast in solid 10k yellow gold, the piece measures 1.5 inches tall and is fitted with a horizontal pin stem and clasp on the back, positioned along the vertical stroke of the letter so the closure stays hidden when worn. It suits anyone who wants a personal initial rendered as a piece of minimal, linear sculpture rather than a traditional block letter pin.

This engagement ring was designed as a close interpretation of a ring the client admired, rebuilt in 14k yellow gold with a marquise-cut yellow lab-grown diamond in place of the original stone. The band splits and rises into two polished arms that meet at a point beneath the diamond, creating a bypass-style V silhouette without a traditional halo or pave detail. The marquise diamond is held by a partial bezel with prong tips at each point, keeping the profile sleek and low. The result is a minimal, modern solitaire that leans on the color of the stone and the sculptural line of the band rather than added embellishment. It suits someone who wanted a specific design they’d seen elsewhere, recreated faithfully but in their own metal and stone choice.

This two-piece pendant set pairs a larger crescent moon for him with a smaller crescent for her, both cast in sterling silver with a high-polish finish. Her pendant carries the design’s only gemstones — a round amethyst paired with a smaller red accent stone — set into the lower curve of the crescent. His pendant is worn solo, while the two crescents are designed to sit together, nesting into the shape of a full moon when placed side by side. Each piece hangs on its own sterling silver cable chain sized to the wearer. The design translates a couple’s shared symbol into two individually wearable pieces that only complete their intended shape when together.

This bypass-style ring is built around a single white pearl set where two tapering rose gold bands wrap toward each other without meeting. Four small diamonds are flush-set into each side of the band, adding quiet sparkle without competing with the pearl. The 14k rose gold is finished to a soft polish, and the band narrows to a delicate 2mm width for a low-profile, everyday feel. It suits someone who wants a ring with real presence but nothing gaudy — a design built for daily wear that still reads as considered and specific.

This pendant takes a personal monogram and turns it into an openwork geometric silhouette — two stylized letters overlapping inside a teardrop-shaped frame, cast in solid 14k yellow gold. The design went through several rounds of refinement to get the negative space right: small enough to keep the pendant compact, open enough that the cut-out gaps read clearly rather than closing in on themselves. The result is a piece that reads as an abstract geometric shape from a distance and reveals the personal initials up close. It suits anyone who wants a monogram piece that doesn’t look like a typical nameplate — something more architectural and minimal, sized to sit close to the body on a fine chain.

This crescent moon pendant was designed as a family piece — each birthstone marking a member of a growing family. A row of pave accent stones traces the outer arch of the moon, interrupted by three natural birthstones in green, red, and a purple-pink hue, set to leave room for more as the family grows. Royal blue enamel fills the inner curve, and a single yellow gold star sits near the base of the crescent. The bail itself is worked into a scrolling letter K, a quiet nod to the family name. Finished in white gold with a yellow gold chain and star for contrast, the piece is sized to sit dainty against the collarbone.

This is a set of two sterling silver rings designed for a pair of best friends, each sized to its own wearer and shaped with a soft, asymmetrical wave profile so the raised tops of both rings fit together when placed side by side. Each 3.0mm band is left free of stones, keeping the focus on the sculptural line of the metal and the engraving hidden on the inside. One band carries a shortened version of a phrase about faith carrying someone through hardship; the companion band carries a phrase about love and justice being inseparable. The two-piece set works equally well worn together or apart, and suits anyone who wants a quiet, personal reminder rather than a decorative statement.

This pendant translates a working cattle ranch’s registered brand into a wearable piece of fine jewelry. A circle of pave-set round diamonds encloses a single diamond-set vertical bar, forming the ranch’s Circle T mark in a dainty, elegant silhouette rather than a bold western statement. The 14k yellow gold pendant measures approximately 1.5 inches across and hangs from a fine paperclip-style chain sized to sit at the collarbone. It suits someone who wants a personal or family symbol reinterpreted as understated, everyday jewelry rather than an overt logo piece.

This pendant takes a hand-drawn personal mark — a simple heart shape with a face worked into it — and renders it as a clean, single-line engraving across a solid 18k yellow gold disc. The design went through two rounds of refinement: the bail placement was changed to sit on either side of the disc rather than at the top, and the engraved line was thinned to keep the mark looking delicate rather than heavy at this scale. At roughly three-quarters of an inch, it reads as a minimal, everyday piece rather than a statement pendant, and it comes on a matching 18k gold cable chain. The design suits anyone who wants a meaningful personal symbol turned into something wearable without extra ornamentation.