Get Inspired, Round Shape / Cut

This thin men’s wedding band is crafted in 14k white gold with a soft matte finish and a low dome profile for everyday comfort. A single small lab-grown diamond is set flush on the interior of the band, invisible when worn but a private detail he carries with him. The inside of the band also carries a short cursive engraving, adding another layer of personal meaning to a simple, understated design. At 4mm wide, the band is deliberately slim and unobtrusive, suited to someone who wants a wedding band that reads as classic from the outside while holding something meaningful on the inside.

This pendant brings together five birthstones in a single cluster composition — a large emerald and a large sapphire bezel-set at the center, surrounded by smaller emerald and aquamarine accents arranged around them like orbiting planets. Made in 14k yellow gold with a matching 18-inch box chain, the design was built specifically to represent a family: two central stones flanked by three smaller ones, each corresponding to a family member’s birth month. All stones are lab-grown, chosen for both environmental reasons and cost efficiency, with identical optical and chemical properties to their natural counterparts. The bezel settings keep every stone secure and give the cluster a smooth, rounded profile that sits comfortably at the neckline. It suits someone who wants a family piece that reads as a cohesive design rather than a simple row of stones, with enough presence to be a focal necklace without feeling oversized for daily wear.

These drop earrings reinterpret a celebrity-inspired tusk silhouette as a two-part design: a small front stud paired with a longer curved jacket that appears to pass through the earlobe. The jacket carries a row of pave-set moissanite stones along its inner curve, while the front hook stays smooth and polished due to its narrow, rounded profile. Cast in 14k white gold rather than silver, the design prioritizes structural integrity — the metal needed to be strong enough to hold small recessed stone settings without bending or risking stone loss. The result is a sparkling, elongated line that curves gently along the ear, with a high-polish finish designed to catch the light.

This engagement ring combines a dark, textured center band with two polished 14k yellow gold rails on either side. The center section is cast in silver, finished matte, and plated in black rhodium to create a woven vine-and-leaf pattern that reads as a naturalistic braid running around the entire ring. A single round natural sapphire in a deep, intense blue sits bezel-set flush within the dark center, chosen so the stone integrates into the texture rather than rising above it on prongs. The three cast sections — two gold rails and the vine-textured center — are soldered together into one solid ring rather than assembled as separate moving parts. The matte finish on the center section was a late refinement, added specifically so the vine and leaf detailing would read clearly rather than disappearing into the sheen of polished metal. The result suits someone who wants a ring with real dimensional texture and a nontraditional dark-and-gold palette, without losing the durability and comfort of a standard band profile.

This 14k white gold engagement ring was designed as a self-purchase to mark a 50th birthday. The bypass band holds a round aquamarine in an open six-prong setting on one side, and a round grey pearl cupped in a wrapping metal setting on the other, creating an intentionally asymmetrical silhouette. The pearl was selected to honor a family tradition of a non-diamond engagement ring, while the aquamarine reflects the wearer’s own birth month. The result is a modern, wearable ring built from two contrasting textures and tones — the faceted brilliance of the stone against the soft luster of the pearl. It suits someone who wants a ring with personal meaning built into the design itself, not just the occasion it marks.

This pendant takes the shape of a slender, twisting ribbon in white gold, with three round stones set vertically down its length. Each stone is a different December birthstone — tanzanite, blue zircon, and blue topaz — chosen so that three sisters born in the same month could each be represented by a distinct color rather than an identical set. The open, flowing form of the band lets each stone catch light independently rather than sitting in a single dense cluster. Built with a future addition in mind, the design leaves room at the base for a fourth stone to be added later without disrupting the existing arrangement or its symmetry. It hangs from a matching white gold chain, giving the whole piece a cohesive, monochrome metal finish that lets the three stone colors carry the visual interest.

This pendant renders the number 87 in a bold, polished block-number silhouette, with two horizontal bars of pave-set round blue sapphires running across the numerals — a nod to the racing decal the design was drawn from. Cast in gold-plated silver at approximately 1.5 inches tall, the piece was designed to be a wearable, occasional-use tribute rather than an everyday piece, since it will travel to dirt racing tracks. The bail at the top was sized to accommodate a standard chain so it can be worn with an existing collection rather than requiring a new one. It suits someone who wants a specific, personal number or symbol translated into a clean, dimensional pendant rather than a generic nameplate or charm.

This engagement ring centers a round lab-grown diamond flanked by two pear-shaped sapphires, chosen in a deeper blue after the client reviewed the first render. The band is 14k white gold with a bypass-inspired profile and a wavy line texture along the interior, hiding two engraved roses connected by a single stem. The design moved from an initial princess-cut concept to a round center stone during the design phase, and the sapphire tone was adjusted once more to get the color right. It suits someone who wants a three-stone ring with a personal, partly-hidden detail meant only for the wearer to discover.

This 14k white gold eternity band was designed to be worn every day without feeling bulky. Four round gemstones — blue sapphire, green peridot, red garnet, and orange citrine — repeat continuously around the entire band rather than covering just the top half, so the pattern of color carries all the way around the finger. Each stone was kept to approximately 2mm to preserve a slim, low-profile silhouette suited to daily wear. The design favors a clean, repeating rhythm over a single focal stone, letting the four colors read as a continuous sequence rather than a cluster. It suits someone who wants a ring with genuine color and detail but doesn’t want the weight or bulk of a statement piece — a band you can wear every day and still notice the color when you look down.

This S-shaped bypass ring was rebuilt in platinum after the original — a custom piece from the 1950s — was stolen. Three round natural diamonds sit in a raised box setting at the center, with pave-set round diamonds tracing both curves of the S so no metal band is left bare. The design was refined over several rounds of sketches and 3D renders to match the client’s memory of the original as closely as possible, including a solid, gap-free profile between the stones and the band. Platinum was chosen over white gold for its durability and because it holds its white color without replating over decades of wear. The piece is intended to be worn daily and eventually passed down to a family member.

This pendant reimagines a peacock in profile, its long curved neck and open tail rendered in rose gold with vivid enamel color work — a deep blue-purple body and brighter teal-aqua tail feathers, refined over several rounds of color proofing to match a photo of a real peacock in sunlight. A graduated row of small blue sapphires runs along the lower edge of the tail, with a few white accent stones marking the eye. The reverse carries old-English-style engraved initials and a private inscription, giving the piece a second layer of meaning beyond what is visible from the front. Suspended from a rose gold chain, it reads as a wearable piece of color and detail rather than a plain pendant, built specifically to be one of a kind rather than a repeat of any existing design.

This wide 14k white gold band carries a pave-set American flag across its face, built from natural diamonds in blue, red, and colorless tones set in tight rows to read as a single continuous rectangle rather than separated blocks of color. The width was increased from an initial 5mm concept to 7.2mm specifically to accommodate three rows of red stones and two rows of white alongside the blue field, matching the proportions of the flag the client had in mind. The band is otherwise plain and polished, letting the flag motif sit as the sole focal point. It suits a wearer who wants a personal or patriotic symbol rendered in fine materials rather than as costume jewelry, and who is comfortable with a substantial, statement-width band for daily wear.

This choker takes the familiar Cuban-link nameplate necklace and simplifies it down to a single geometric element: an open circle set with a single row of lab-created diamonds, centered on a solid 8mm curb chain. The chain was sourced longer than the finished length and links were removed to reach an exact 15-inch fit, worn close to the neck rather than at the collarbone. The O is stationary against the chain — the connecting links do not move — so the diamond-set edge stays protected from metal sliding across the stones during wear. Built in 14k yellow gold for warmth and solidity, this is a piece for someone who wants the presence of a heavy chain without needing it to spell anything out.

This poignant set of yellow gold bands was lovingly crafted as a sacred tribute to a precious daughter, honoring a life that, while fleeting, is infinitely cherished. Designed for her parents, each ring features her name, delicately engraved alongside a flowing rose motif—a beautiful nod to her namesake. A single, iridescent opal, her birthstone, is bezel-set into the band, capturing a spectrum of light and memory. The most intimate detail remains hidden against the skin: the interior of each band is engraved with the exact EKG heartbeat of the child, a moving reference to her courageous journey. Alongside the pulse, her birthdate is permanently inscribed, ensuring her rhythm is always felt. More than jewelry, these rings serve as a dignified heirloom of love, resilience, and an unbreakable family bond.

This enchanting 14K yellow gold engagement ring is a masterful celebration of celestial beauty and mystical symbolism. At the heart of the design is a vibrant, round lab-grown pink sapphire, serving as the fiery core of a brilliant sunburst. The sun’s rays radiate outward in polished gold, with a shimmering round lab-grown diamond tucked into every other ray for a rhythmic, sparkling effect. Flanking this solar centerpiece are two delicate crescent moons, each cradling a single diamond to complete the heavenly alignment. The polished, slender band ensures the intricate celestial motif remains the focal point of this unique piece. Combining vibrant color with iconic geometry, this ring is a whimsical yet sophisticated choice for a love that spans the heavens.

This commanding yellow gold men’s ring is a breathtaking display of sculptural artistry and raw power. Expertly crafted with meticulous detail, the ring features the fierce visage of a lion, with every strand of its flowing mane rendered in high-polished gold. The king of beasts is brought to life with two piercing round diamond eyes that glint with intensity. Adding a bold pop of royal color, a vibrant red ruby is held within the lion’s roaring mouth, symbolizing strength and passion. With its heavy, solid gold construction and intricate textures, this statement piece is a timeless symbol of leadership and courage.

This diamond cross pendant was recreated from a piece that had been worn daily for years before its chain broke and the pendant was lost. Sixteen round lab-grown diamonds run the full length of both arms, set in a gallery-wire construction along the back that echoes the original’s hollow-backed structure. Cast in 14k yellow gold and paired with a wheat-style chain to match the original as closely as possible, the piece was refined over several rounds of feedback until the front, sides, and back all matched what the client remembered. It suits anyone who wants a family piece back in daily rotation rather than sitting untouched in a box.

This exquisite 14K yellow gold wedding set seamlessly blends timeless romanticism with modern ethical luxury. The engagement ring features a brilliant round lab-grown diamond solitaire, encircled by a radiant halo of smaller lab-grown diamonds that amplify its sparkle and presence. To ensure a perfect fit, the halo is elegantly elevated on a polished cathedral-style setting, allowing the matching wedding band to rest completely flush against the engagement ring. The wedding band itself is a masterpiece of detail, featuring a vintage-inspired hand-engraved scroll pattern that wraps around the entire shank. This intricate work is framed by delicate milgrain edging, adding a touch of antique texture that beautifully contrasts with the high-polished finish of the engagement ring’s band.

This bracelet centers a round sterling silver charm carrying a color photo applied through a laser enamel process, flanked on either side by a single bezel-set birthstone worked directly into the chain links. The photo sits within a smooth polished bezel rim, and the chain is a polished oval-link style chosen to complement the round center piece without competing with it. A garnet marks a January birthday and a tanzanite marks a December birthday, placing both people represented in the design directly into the wearable piece rather than as a separate charm or engraving. The design went through two rounds of revision, moving from a shaped photo template to a simple round base at the client’s request, keeping the piece understated and wearable every day. It suits someone who wants to carry a specific memory of two people close at hand, in a piece substantial enough for daily wear but simple enough not to need explaining.

This exquisite engagement ring is a heartfelt recreation of a cherished vintage heirloom from 1925, thoughtfully redesigned to honor its original beauty. Crafted in luminous 14k white gold, the band gracefully tapers towards the base, echoing the delicate elegance of the original. The intricate openwork on the sides has been subtly refined for a contemporary touch while preserving timeless charm. Featuring a stunning marquise-cut center stone surrounded by an array of brilliant pavé-set accent stones.

These drop earrings were built around a reference photo the client loved, translated into three concentric teardrop-shaped rings suspended from a round stud top. Each ring is set with round champagne diamonds and white diamond accents in individual bezel settings, connected by slender metal links that let the tiers move independently. At approximately 2.5 inches long, they have real presence without being unreasonably heavy, since 14k white gold was chosen over platinum specifically to manage weight on the ear. The design went through more than one round of revision to increase the stone density and rebalance the visual weight between metal and gemstone, matching the layered, sparkling look of the original inspiration image as closely as possible.

This ring rebuilds a 1970s engagement ring from a client’s memory, a handful of screenshots pulled from an old home video, and her daughter’s sketches. A round lab-grown diamond sits in a tall white gold prong setting, lifted slightly above the band so light passes beneath it, exactly as the original was remembered. A white gold spray of four leaf shapes, each set with two small diamonds, curves around one side of the center stone in a crescent silhouette, echoing a nature motif that was popular in the era without being a literal leaf or moon design. The double-band yellow gold shank provides the warm gold contrast that stood out most vividly in the client’s memory. The piece was designed for a woman with a substantial, well-loved hand, sized to fit comfortably for daily wear after five decades without her original ring. This design suits anyone recreating a vintage-style piece with mixed metals and a raised, dimensional center setting.

This two-band engagement and wedding set was recreated in 14k white gold from a single photo of a ring lost during a move. A round natural diamond sits high in a six-prong head above a hexagonal connector, flanked on both bands by marquise-cut diamonds. The stones were intentionally sourced at a lower clarity to match the cloudy, milky appearance of the 1960s-era original rather than upgrading to a clearer modern diamond. The two bands connect permanently at the base and separate slightly at the top, echoing a construction style common in mid-century jewelry. It suits someone recreating a specific heirloom design rather than starting from a blank slate, where matching the original’s exact proportions and stone character matters more than maximizing sparkle.

This station necklace upgrades a well-loved costume piece into fine jewelry, replacing its small silver beads with round lab-created diamonds set in white gold bezels along a 14k yellow gold cable chain. The diamonds are spaced evenly around the entire length of the chain rather than clustered at the front, so the sparkle continues all the way around the neck. Low-profile bezel settings keep the stones sitting close to the chain for a delicate, understated look rather than a heavy statement piece. It suits someone who wants to upgrade a favorite everyday necklace into something with lasting durability, without changing the essential character of the design they already loved.