Every piece here started as a real conversation with a real client, with a reason behind it, a story, and a lot of emotion. We’re not showing you a catalog. We’re showing you what’s possible, so you can design your own.

Recreated Vintage S-Curve Diamond Ring in Platinum

This S-shaped bypass ring was rebuilt in platinum after the original — a custom piece from the 1950s — was stolen. Three round natural diamonds sit in a raised box setting at the center, with pave-set round diamonds tracing both curves of the S so no metal band is left bare. The design was refined over several rounds of sketches and 3D renders to match the client’s memory of the original as closely as possible, including a solid, gap-free profile between the stones and the band. Platinum was chosen over white gold for its durability and because it holds its white color without replating over decades of wear. The piece is intended to be worn daily and eventually passed down to a family member.

more

American Flag Ring in White Gold with Colored Diamonds

This wide 14k white gold band carries a pave-set American flag across its face, built from natural diamonds in blue, red, and colorless tones set in tight rows to read as a single continuous rectangle rather than separated blocks of color. The width was increased from an initial 5mm concept to 7.2mm specifically to accommodate three rows of red stones and two rows of white alongside the blue field, matching the proportions of the flag the client had in mind. The band is otherwise plain and polished, letting the flag motif sit as the sole focal point. It suits a wearer who wants a personal or patriotic symbol rendered in fine materials rather than as costume jewelry, and who is comfortable with a substantial, statement-width band for daily wear.

more

Star of David Pendant in White Gold with Blue Diamonds

This Star of David pendant is built from two overlapping triangles in 14k white gold, each outlined in a continuous row of pave-set diamonds. One triangle is set with colorless diamonds and the other with royal blue diamonds, creating deliberate contrast between the two interlocking shapes. At just under an inch across, the piece uses 102 round stones totaling roughly 2 carats, hand-set by a single jeweler. It suits someone looking for a religious or cultural symbol rendered as a genuine statement piece rather than a small everyday charm.

more

Delicate Princess-Cut Ring With Gold Leaf Accents

This engagement ring centers a princess-cut lab diamond, rotated on point to read as an elongated diamond shape rather than a standard square profile. V-shaped prongs anchor each corner of the stone, reinforced by a gallery rail and a cluster of marquise and round diamonds that fan out around it. Delicate yellow gold leaves extend outward from the shoulders of an otherwise white gold band, and pave diamonds continue partway down the shank. The cathedral-style setting lifts the stone for a raised, architectural profile while keeping the overall design light and floral rather than heavy. It suits someone who wanted a delicate, nature-inspired ring without an oversized presence on the hand.

more

Saint Michael Stained-Glass Pendant in White Gold

This pendant reimagines a stained-glass window in miniature: an arched white gold frame holds a raised figure of Saint Michael, wings extended, standing over a fallen figure beneath his feet, with ‘Saint Michael’ engraved along the base. Behind the figure, a mosaic of 66 individually set gemstones — tsavorite garnets, rubies, sapphires in purple and blue, and diamonds — fills the arched window in a deliberate stained-glass pattern. The piece is built from two separately cast plates, hand-set with stones and then laser-welded together, with small hand-drilled openings behind select stones so that light can pass through the gems the way it would through real stained glass. At roughly 1 to 1.5 inches tall and about 2mm thick, it sits as a substantial but wearable pendant. The two-plate construction and the density of the stone-setting make this a considerably more involved build than a standard cast pendant, suited to someone who wants a religious piece with real dimensional depth and color rather than a flat engraved medallion.

more

Pixel Character Pendant in Sterling Silver with Black Rhodium

This pendant translates a blocky, pixel-art digital image into a three-dimensional sterling silver piece. The design was refined through several rounds of review, moving from a flat render to a full 3D model so the client could evaluate the dimensional blocks before committing. The final piece uses black rhodium plating on the recessed background blocks to create contrast against the polished silver foreground, making the pixelated character read clearly in physical form. A cable chain and lobster clasp complete the piece, which sits at approximately one inch in height. It suits anyone who wants to carry a piece of digital art or a personal collectible into a wearable, everyday format.

more

Sunburst Halo Marquise Engagement Ring in Platinum

This engagement ring centers a marquise-cut lab diamond, colorless and just under two carats, surrounded by a sunburst-style halo of round and marquise accent diamonds that echoes the elongated shape of the center stone. Cathedral-style shoulders rise on either side, their pierced scroll detail concealing two small personal symbols worked into the metal where the halo transitions into the band — a nod to a private reference the couple shares. The band itself is pave-set with small diamonds for continuous sparkle from the halo down to the shoulder. Crafted in platinum for its durability and hypoallergenic properties, the design balances a bold, dimensional top with a low-profile band so it can be worn daily without catching on clothing or gloves. It suits someone who wanted a specific, non-traditional stone shape paired with a personal, hidden detail rather than an off-the-shelf setting.

more

Three Stone Princess Cut Ring

This white gold ring is a radiant design that beautifully balances elegance with personal meaning. At its center, three princess-cut moissanite stones are featured, with the middle stone slightly larger to create a striking focal point. The brilliance of the moissanites is enhanced by a wide shank that branches from either side, each shoulder adorned with three rows of small round pavé-set diamonds. For a deeply personal touch, a single peridot birthstone is bezel set beneath the center stone on both profile sides of the ring. These hidden gems bring a meaningful detail to the design while adding a pop of fresh green color, making the ring truly unique and significant.

more

Palladium Crossover Band Recreated for a Metal Allergy

This wide crossover band was recreated from a client’s photos of a ring his wife loved but could no longer wear because of a metal sensitivity to silver. Rebuilt in palladium — the same hypoallergenic metal as her wedding ring — the design keeps the original’s woven, multi-row structure: five intersecting bands, three set with a continuous line of round moissanite and two left smooth and polished for contrast. The crossing rows create a dimensional, textured look without needing a center stone to anchor the design. At a substantial 10-11mm width, the ring reads as a statement piece while remaining comfortable thanks to palladium’s naturally light weight compared to platinum. This piece suits someone who already knows exactly which design they love and simply needs it rebuilt in a material their skin can tolerate.

more

Multi-Row Birthstone Band in 14k White Gold

This wedding-style band is built around a three-row stone layout: two outer rows of round moissanite flanking a center row of five colored gemstones, each a different birthstone color running red, blue, green, purple, and yellow. The band is 14k white gold, chosen specifically over a lower-karat option for its strength in holding pave-set stones securely over years of daily wear. At 10mm at the top, the band tapers subtly to 8.5mm at the back for a more comfortable fit against the finger. The design was refined from the client’s original concept to add six additional moissanite stones per outer row and to introduce the gentle taper, both changes made after the client reviewed the 3D render.

more

Infinite Pathways To The Heart

This exquisite sterling silver ring intertwines an elegant heart outline with the timeless infinity symbol, representing endless love and connection. A mesmerizing lab-created alexandrite and a vibrant ruby are set within the design, symbolizing passion and transformation. Sparkling natural diamonds (F/G color, VS clarity) accent the piece, adding brilliance and sophistication. Perfect as a meaningful gift or a personal statement, this ring beautifully blends sentiment with refined craftsmanship.

more

Circle Pendant With Three Children’s Names in Rose Gold

This circle pendant was designed to hold three children’s names in one continuous, unbroken shape. Each name is hand-inscribed in a delicate script font around the ring, with the three names separated by pave-set lab diamond bands rather than a single line of stones. The pendant is solid rather than hollowed out, giving it consistent weight and preventing any visibility of an open interior from certain angles. It hangs from a fine diamond-style chain, and the chain attachment points were widened slightly from the first design to sit more naturally against the pendant. At just 0.7 inches across, the piece stays compact and wearable every day while keeping all three names legible. It suits anyone who wants a family piece that reads as one unified circle rather than three separate elements strung together.

more

Diamond Ring Guard in 18k Gold for Radiant-Cut Ring

This ring guard was built to frame an existing engagement ring rather than stand alone. Two parallel 18k yellow gold bands, each set roughly three-quarters of the way around with small round lab-grown diamonds, flank the center stone’s platinum prong head and connect into a single shank at the base. The design was modeled directly from the specifications of the original engagement ring, so the guard’s proportions and stone placement were built to complement — not compete with — the radiant-cut center stone already in place. A resin model was shipped ahead of casting so the finished fit could be confirmed on the actual hand before any metal was committed. The result is a piece meant to be worn stacked with its companion ring every day, adding brightness and dimension around the center stone without altering the original setting.

more

Heart & Cross Ring

This sterling silver ring blends delicate beauty with symbolic meaning. The ring features a heart-shaped center, elegantly crafted with a narrow band that runs through the middle of the heart. A crossbar intersects the band, forming a Cross in the center of the heart, representing faith and love intertwined. The area around the Cross is adorned with small, sparkling round diamonds, adding a touch of brilliance and highlighting the shape of the heart. This piece is perfect for those seeking a meaningful expression of devotion and love.

more

Double Halo Platinum Ring Set with Twisted Pave Shank

This platinum engagement ring set began as a single, structurally compromised ring — a thin pave shank that shed stones and a center stone held by insecure prongs. Working from the client’s own gemstones, sent in for scanning and measurement, the design rebuilds the setting from the ground up: a double halo cradles the round center diamond above a delicate twisted pave shank, flanked on either side by two new platinum bands set with matching pave diamonds. All three pieces were soldered into a single unit at the client’s request, so the finished ring reads as one cohesive silhouette rather than a stacked set. The band widths were matched during the design phase so every element — center shank and both outer bands — appears consistently thin and refined.

more
A yellow gold signet ring with a round flat face, showing a three-pronged geometric logo outlined in small round pave-set diamonds against a smooth polished gold background, photographed on a light stone surface.

Gold Signet Ring with Diamond Logo Emblem

This large-format signet ring turns a smoke shop’s brand mark into a wearable piece, with the logo built entirely from 42 round pave-set lab diamonds against a smooth 14k yellow gold background. The oversized oval face was sized generously for a pinky-finger fit, giving the design enough surface area for the logo’s linework to read clearly. The design went through a few late changes — a black rhodium finish and an enamel background were both considered and ultimately dropped in favor of the simpler, all-gold look, which the client felt suited the mark best. It suits someone who wants their brand or personal identity worn boldly, not subtly — a statement piece built around a mark that means something to them.

more

Men’s White Gold Engagement Ring — Soft-Square Pave Sides

This engagement ring was built around a request for a masculine design that still felt refined on a smaller finger. A bezel-set round center stone sits within a softened square top, flanked by pave-set accent diamonds that continue partway down both sides of the band. The band itself was adjusted during the design phase from a concave profile to a flat-sided one at the client’s request, giving the piece a cleaner, more substantial feel without adding bulk. Finished in 14k white gold with a soft-square silhouette, it suits someone who wants a ring that reads as bold but stays proportional to the hand.

more

Upgraded Pave Engagement Ring — 14k White Gold Moissanite

This engagement ring was built to closely follow the design of a costume piece the client had worn and loved, translated into 14k white gold with a 3-carat round moissanite at the center. Three rows of pavé-set round accent stones run along each shoulder of the bypass-style band, echoing the layered look of the original. The design was scanned and modeled from the client’s own ring, then refined through a render and resin review before casting. It suits someone who found a design they already love in a lower-cost version and wants that exact look rebuilt in a real, durable metal for daily wear.

more

Three Finger Ring Set With Diamonds

This bold sterling silver three-finger ring is a statement piece that is sure to be a conversation starter. The elongated top spans across three fingers, featuring a crisp rectangular shape that catches the eye with its sleek and structured form. Three rows of sparkling round diamonds are meticulously set into the top of the ring. A narrow border of silver surrounds the diamonds, creating a striking contrast that highlights the brilliance of the stones. The unique design of this ring allows it to be worn across three fingers, making it a powerful and distinctive accessory.

more

Initial & Heart Lapel Pin in White Gold with Rubies

This lapel pin takes the classic “I ❤ [Name]” motif and renders it as an open, see-through design in 14k white gold. The letters I and A are lined with small round natural diamonds, while the heart between them is densely set with natural rubies chosen for a rich, saturated red rather than the pinkish tone common to lab-grown material. The design went through a deliberate simplification: an early version had a solid background connecting all the elements, but the piece was reworked into a cut-out structure so the letters and heart connect directly to one another with no surrounding metal. Sized to about three-quarters of an inch — close to the size of a quarter — it’s built to be noticed without being oversized. The open structure keeps the piece feeling light while the pave and channel stone-setting keeps the sparkle dense across a small surface.

more
A domed sterling silver heart pendant pavé-set with round clear stones on the top and bottom lobes, with the name GIGI engraved in dark lettering across a polished diagonal band, hanging from a silver rope chain.

GIGI Heart Pendant — Pavé Silver Nameplate Necklace

This puffed heart pendant is crafted in sterling silver and pave-set with round moissanite stones covering the top and bottom curves of the heart. A polished silver band sweeps across the center, engraved with a name and finished with a blackened treatment so the lettering stands firmly apart from the bright pave. The heart was given a hollow, domed construction for visual depth without excess weight, and hangs from a sterling silver rope chain. The design suits anyone wanting a sentimental, wearable piece that reads as a personal dedication rather than a generic heart pendant.

more

Heart Accent Diamond Band — Custom Moissanite Ring

This 14k yellow gold ring was built from an existing design the client admired, with two key changes: the double hexagon shape on the band’s side profile was replaced with a pair of hearts, and the small circular dangling tag was reshaped into a heart filled with pave stones. The band is densely set with round moissanite stones across three rows, chosen for brilliance at a lower cost than natural diamond, with small lab diamond accents used for the smaller stones. The heart charm hangs from a fixed loop so it moves independently while the rest of the setting stays secure. At approximately 6mm wide, the band has enough surface area to carry the dense stone coverage without feeling delicate, making it a substantial, eye-catching piece suited to someone who wants maximum sparkle with meaningful symbolism built into the design.

more

Pave Diamond Cat Face Ring in Platinum — Anniversary Gift

This ring takes the shape of a cat’s face, fully pave-set with round diamonds across the head and ears, with blue diamond eyes and a small pink heart-shaped nose formed from pink diamonds. The design began from reference photos and was refined into a smaller, more delicate scale than the original inspiration images. The band is platinum, chosen for durability and a bright white finish that complements the pave work. Inside the band is a short cursive inscription, a private detail only the wearer knows about. The piece suits someone who wants a playful, figural design elevated with genuine stone-setting and metal quality rather than a novelty look.

more

Diamond Wave Ear Climber in 14k White Gold

This single ear climber was built from the client’s own original design concept — a flowing, organic line that curves up along the outer ear, traced with pave-set diamonds and anchored by a trio of round diamonds near the base. Cast in 14k white gold with naturally mined VS clarity, F-G color diamonds throughout, the piece was engineered from scratch since no existing reference for the design could be found. The wavy silhouette is deliberately asymmetrical and organic rather than geometric, designed to sit toward the thinner outer edge of the ear. It is a climber-style earring, meaning it is intended to travel upward along the ear’s curve rather than hang or sit flat, and it was designed around multiple ear piercings to allow for flexible post placement. The piece suits someone who wants a single standout earring with real sculptural presence rather than a traditional matched pair.

more

Remembrance

This pendant is a poignant tribute to a beloved child lost too soon. Crafted in 14karat yellow gold, this rectangular pendant holds deep sentimental value for the wearer. At its heart, initials run vertically through the center, each letter set with small diamonds. Above the topmost letter, three radiant rays extend outward, each adorned with diamonds, symbolizing the enduring light and spirit of the cherished soul. The remaining surface of the pendant is a sea of blue spinel stones to represent the birthstone. This pendant serves as a touching reminder of life cherished and a love that has no bounds.

more

White Gold Bar Pendant with Star of David & Initials

This pendant is a rectangular bar of 14k white gold, polished to a clean finish on all four faces. One face carries three small pave-set black diamonds arranged vertically beneath a Star of David engraving. The remaining faces carry engraved letter initials, one per side. The bail was reworked mid-design to accommodate a chain the client already owned, using a simple loop rather than the originally modeled opening. At just over 7 grams and roughly 38mm long, the piece reads as a compact, modern statement piece suited to daily wear on a box link chain.

more

Midnight Elegance

This white gold ring is a bold and captivating statement piece designed to allure and captivate. The white gold has been black rhodium plated allowing for an aura of mystery and sophistication. The surface of the ring is adorned with three rows of small round black diamonds, meticulously set to create a display of darkness and brilliance. The juxtaposition of the lustrous black diamonds against the deep black hue of the metal creates a dramatic effect.

more
A round 14k yellow gold pendant with two crossed anchors at the center, a border of small diamonds and filigree detailing, and a teardrop-shaped pearl hanging below, on a gold cable chain.

Nautical Anchor Pendant with Diamond Filigree & Pearl Drop

This pendant centers on a round 14k yellow gold disc with two crossed anchors cast in relief, framed by a scalloped border set with small round diamonds along the sides and single diamonds marking the top and bottom. A teardrop pearl hangs beneath the disc on a short connector designed with extra jump rings to keep it moving freely without kinking. The piece is finished in a polished gold throughout, hung on an 18-inch cable chain. It was designed as a second piece in a nautical-themed series, refined through several rounds of sketches to settle on the anchor placement, border pattern, and stone layout.

more

Business Logo Pendant

Celebrate corporate identity with our 1-inch double H pendant, a business logo in resplendent 14kt yellow and white gold. The intricate design is accentuated by sparkling yellow and white CZs, adding brilliance and depth. Meticulously crafted, this pendant is a fusion of sophistication and personal flair, embodying the essence of meaningful jewelry. More than an emblem, it’s a wearable celebration of business success and individuality, capturing the craftsmanship that transforms logos into timeless, elegant pieces of adornment. A tribute to the artistry and personal narrative within the corporate realm.

more

444 Numeral Pendant in Pavé Diamonds, White Gold

This pendant spells out the number 444 in three connected numerals, each one fully covered in pave-set natural diamonds from edge to edge. The piece is crafted in solid 14k white gold with no plating, chosen specifically for durability and lasting color. A petite 1.5mm cable chain in matching white gold completes the piece, connecting at both ends of the numeral sequence rather than from a single point above. At approximately one inch long and 3/8 inch tall, the pendant sits as a compact, modern numeral design meant for everyday wear. The combination of a meaningful number sequence and full diamond coverage makes this a personal, symbol-driven piece rather than a traditional pendant silhouette.

more

Wide Beaded-Edge Yellow Gold Diamond Eternity Band

This eternity band pairs a full circumference of pavé-set round lab diamonds with a distinctive beaded gold border along both edges of the band. The wide profile — about 8mm — was chosen to closely match a reference photo the client provided, and the scale of the beaded border was increased during the design phase so it would read as prominently in person as it did in that original image. Set in 14k yellow gold, the dense diamond cluster runs the full way around the band rather than stopping halfway, giving it a substantial, continuous sparkle from every angle. The combination of the bold bead texture and the tightly clustered stones gives the design a more dimensional, tactile quality than a standard pavé band. It suits someone who wants a statement eternity ring with real presence on the hand, not a delicate or understated version of the style.

more

Diamond And Amethyst Band

This mesmerizing White gold band features three enchanting rows of small round stones, creating a seamless and captivating design that encircles nearly the entire ring. The center row of stones features regal purple hues of round amethyst stones. Embracing the amethyst row on either side are rows of round brilliant cut diamonds. This exquisite combination of amethyst and Diamond results in a harmonious blend of color and radiance.

more

Lightning Bolt Ring Upgraded to White Gold & Sapphires

This ring takes a beloved existing design and rebuilds it in lasting materials — a lightning-bolt silhouette, once filled with a composite glitter stone, now set with genuine round yellow sapphires in graduated sizes. The open-style band is cast in 14k white gold for brightness and durability, with the bolt shape sharpened to as pointed a tip as comfort allows. Small stones ranging from 1mm down to under a tenth of a millimeter are mechanically set throughout the bolt, filling the silhouette tightly while keeping the edges comfortable to wear. The design suits anyone who loved the look of a favorite piece but wanted it built to last — without losing any of the sparkle or shape that made the original special.

more

Pendant Recreation

This exquisite white gold pendant is a faithful recreation of a cherished family piece. The pendant boasts a brilliant round diamond at its heart, elegantly bezel-set. Surrounding this central gem, the pendant features four gracefully designed fan-like quadrants. Each of these quadrants is adorned with a shimmering collection of diamonds. This pendant is not only a stunning piece of jewelry but also a sentimental treasure, carrying forward the spirit of the original family keepsake.

more

Gold Star Lapel Pin with Diamond Milestone Accents

This is an open-outline star pin, its five points formed from slim tapered bars that leave the center hollow rather than filled. Round stones — sapphires, emeralds, and lab diamonds in varying counts — are set at the inner angles of the star, with the stone combination changing from one version to the next across the set. The set was produced across two metals, sterling silver and 14k yellow gold, to distinguish between tiers. A standard pin stem and clutch closure run across the back, designed to be worn on a lapel rather than hung from a chain. It is a milestone-recognition design: a consistent base shape that is customized piece by piece through gem count and placement, so that a milestone can be read at a glance by which stones are present.

more

Recreated Leaf Brooch — Diamond & Citrine Gold Pin

This leaf-shaped brooch was recreated from a single photograph of a family heirloom that had been lost. The design uses alternating rows of round citrine and round diamonds set in a pave arrangement across a gold leaf silhouette, with a pin stem and hinge on the reverse. The metal was thinned slightly behind the stones after the client reviewed the first render, while enough structure was retained at the back to keep the brooch from bending. It suits someone looking to bring back a specific heirloom’s look rather than design something new from scratch.

more

Pet Memorial Pendant — Dog Portrait in Diamond Halo

This round pendant centers a dimensional, matte-finished portrait of a dog’s face, angled slightly rather than straight-on, raised above a halo of pave-set lab diamonds within a polished 14k yellow gold bezel. The back carries a personal engraving — a nickname in script lettering above a simple paw print outline. The piece was designed from a client’s photographs, refined through several rounds of feedback on the angle of the head and the softness of the muzzle detail before the final 3D model was approved. It suits anyone looking to carry a pet’s likeness as a wearable, everyday keepsake rather than a traditional memorial piece.

more

Recreated Heirloom Band — Vintage Cutout Pattern in Gold

This eternity-style band was recreated from a single aged photograph of a ring that had belonged to the client’s grandmother for over fifty years before it was stolen. The design uses two tones of 14k gold — a warmer yellow on the outer edges and a paler center — with a continuous pattern of marquise-shaped cut-outs running the full circumference of the band, each centered with a small round diamond. The piece went through several rounds of refinement after the first render, as the client worked to correct details that didn’t match her memory of the original: removing extra decorative lines, filling in gaps between the cut-out sections, and confirming the diamonds should read as round rather than any other shape. The result is a smooth, continuous band that reads as one unbroken surface rather than pieced-together sections. It suits anyone recreating a worn vintage piece from limited photographic reference, where getting the proportions and continuity of the original pattern right matters more than exact metal certification.

more

Star of David Heart Pendant in 14k Yellow Gold

This round pendant in 14k yellow gold recreates an earlier design at a more compact scale, built around a Star of David outlined in pave-set lab-created diamonds, with the top points of the star shaped into a heart. The polished disc frames the symbol so it sits clearly at the center, hanging from a twisted rope chain. The design was refined through several size discussions before settling on a 0.75 inch diameter — the size needed to keep the diamond pave detail intact rather than simplifying to a plain engraving. It suits someone who wants a meaningful cultural and personal symbol rendered in a compact, wearable form, worn as an everyday layering piece or a standalone pendant.

more

Pave Diamond Wedding Set

This stunning wedding set is crafted from 18karat and features a breathtaking 2.8carat Round Diamond in a four prong head which is elevated above a delicate band. Each of the prongs has been meticulously set with small Diamonds adding extra sparkle to the center. The band of the engagement ring features small round diamonds along the top and side walls, running half way down each side. The matching wedding band complements the engagement ring perfectly and is also set with small diamonds along the top and side walls. Both rings are designed to be worn together as a glamourous set.

more

Palaoa-Inspired Pendant in White Gold with Garnets

This pendant reinterprets the traditional palaoa form — historically carved from whale ivory — in cast 14k white gold chosen specifically to echo that pale, bone-like color. One edge of the curved form is lined with pave-set garnets running the full length, while the sculptural tongue shape is left polished and smooth, with no stones in the curved mouth area. The base was deliberately widened and rounded rather than tapered to a point, so the piece lays flat against the chest rather than swinging forward. A 5mm center hole accommodates a 4mm chain. The result balances a culturally rooted silhouette with a comfortable, durable, everyday wearable piece.

more
A white gold cut-out pendant with three connected shapes — a heart set with red stones, a crescent moon set with light blue stones, and a sunburst set with yellow-green stones — hanging from a chain.

Heart, Sun, And Moon Pendant.

Crafted in 14k white gold, this pendant showcases a captivating design that combines the shapes of a heart, sun, and moon. The heart is adorned with an array of pave-set rubies. The moon is adorned with swiss blue topaz. Lastly, the sun shines brightly with yellow sapphires. With a height of 1.5 inches, this pendant commands attention and it hangs from a white gold chain. This exquisite pendant is not only a beautiful piece of jewelry but also a reflection of the wearer’s unique style and personality.

more