Recreated Bridal Set — Lost Engagement Ring, Lab Diamond
This engagement ring and wedding band were recreated as a single soldered piece in 14k white gold, set with a round lab diamond solitaire held by simple prongs. The design favors a low, classic profile rather than an elaborate setting, matching the original ring’s simple silhouette as the client remembered it. It suits someone who wants a faithful stand-in for a piece they can no longer wear, made in a lab diamond for the same look at a lower cost. The two bands are cast and finished separately, then joined so the ring goes on and off as a single unit, just like the original.
Emerald-Cut Three Stone Engagement Ring in 18k White Gold
This engagement ring centers a 1.5 carat emerald-cut moissanite, flanked on each side by a triangular cluster of small round diamonds with milgrain detailing along the basket edges. The design moved through several rounds of refinement — from an initially twisted band down to a straight profile that lowered the stone height, and from simple triangular side stones to a more detailed clustered design inspired by an antique reference the client found. The inside of the band carries a hidden engraving, positioned so it takes a deliberate look to find. Finished in 18k white gold throughout, the ring suits someone who wanted a vintage-influenced look with a modern, comfortable wear profile.
Vine Engagement Ring
This enchanting rose gold engagement ring features a pear-shaped center diamond set at a graceful angle, adding a whimsical touch to its design. The ring’s open band is formed by intertwining vines that weave elegantly around the finger, creating a fluid, organic silhouette. These delicate vines wrap protectively around the angled diamond, allowing it to sit low for a comfortable, low-profile setting. Scattered along the band, nestled among the vines, are small accent stones—emeralds, diamonds, and amethysts—each adding a vibrant pop of color. The mix of gemstones and natural-inspired detailing gives this ring a romantic, earthy feel.
Organic Elegance
Crafted in yellow gold, this nature-inspired band showcases a lush array of sculpted leaves that dance across its surface. The detailed design features a mix of matte and polished finishes, giving depth and contrast to the flowing botanical motif. The leaves form a curved channel through the center of the ring, adorned with five brilliant diamonds. This design captures the feeling of flourishing growth and beauty in motion.
Crossing Silhouette
This eye-catching two-tone ring is crafted from a mix of yellow and white gold, artfully designed with four crisscrossing bands that create a striking, sculptural silhouette. Two of the bands feature a high-polish finish—both in yellow gold —while the other two white gold bands are set with shimmering diamonds that extend across the top, adding brilliance and elegance. The open spaces formed by the crossing bands create visual depth and movement, enhancing the dynamic and modern feel of the ring. The interplay of warm and cool tones, combined with the sparkle of diamonds and the graceful curves, makes this design both bold and sophisticated.
Recreated Oval Diamond Ring — Wood-Grain Rose Gold Band
This engagement ring replaces one that was lost, recreated as closely as possible to the original while making a few thoughtful updates. An oval lab-grown diamond sits in a four-prong setting atop a narrowed 14k rose gold band, with wood-grain style ridges carried around the shoulders to echo the design of the original piece. The band was brought down to 1.5mm from a much thicker starting point, giving it a lower profile that suits smaller hands without losing the textured detail that made the original distinctive. It suits someone who wants a faithful recreation of a meaningful piece but is open to small refinements that make it more comfortable for daily wear.
Yellow Diamond Halo Band — Low-Set Five-Stone Ring
This ring pairs a row of five color-enhanced yellow diamonds with a colorless diamond halo around each one, creating a repeating cluster pattern across a 14k yellow gold band. Every stone was set as low as possible and the surrounding halo diamonds are flush-set into the metal, so nothing sits high enough to snag on gloves, tools, or fabric during hands-on work. The transition where the cluster meets the plain band was smoothed for comfort. It suits someone who wants noticeable sparkle and color in a ring built to be worn every day without babying it.
Shield-Cut Engagement Ring with Black-to-White Diamond Trio
This engagement ring centers on a shield-cut lab-grown diamond, custom cut to just over two carats to achieve proportions that don’t exist in standard inventory. On each side, three round diamonds are arranged in ascending clarity — black, salt-and-pepper, then colorless — echoing the center stone as they move from dark to clear. The band is a polished 14k rose gold with a soft wave at the shoulders where the accent clusters sit. Built for a shield-cut stone this size, the setting keeps the side clusters visible from above rather than wrapping around the finger, so the design reads clearly without needing to turn the hand.
Oval Bezel Set Engagement Ring
This yellow gold ring features a captivating oval rose cut diamond at its center, delicately framed in a slender bezel that highlights the unique silhouette and soft facets of the stone. The rose cut’s shallow profile allows the ring to sit low on the finger, offering both elegance and everyday comfort. From each side of the bezel, a graceful curved wall twists outward, each one cradling a small round diamond, adding subtle sparkle and sculptural detail. This ring is a refined and romantic piece with timeless character.
Yellow Marquise Diamond Engagement Ring in 14k Gold
This engagement ring was designed as a close interpretation of a ring the client admired, rebuilt in 14k yellow gold with a marquise-cut yellow lab-grown diamond in place of the original stone. The band splits and rises into two polished arms that meet at a point beneath the diamond, creating a bypass-style V silhouette without a traditional halo or pave detail. The marquise diamond is held by a partial bezel with prong tips at each point, keeping the profile sleek and low. The result is a minimal, modern solitaire that leans on the color of the stone and the sculptural line of the band rather than added embellishment. It suits someone who wanted a specific design they’d seen elsewhere, recreated faithfully but in their own metal and stone choice.
Emerald Halo Engagement Ring
This exquisite platinum wedding set showcases a harmonious blend of elegance and vibrant color. The engagement ring features a bezel-set round diamond at its center, encircled by a stunning halo of vivid emeralds. The top frame seamlessly transitions into a narrow band, which is adorned with a row of small round emeralds, adding a touch of brilliance to every angle. Complementing the engagement ring is a perfectly matching wedding band, equal in width and set all the way around with the same dazzling emeralds. Together, these rings create a seamless and sophisticated pairing,
Marquise Diamond Wide Band Engagement Ring
This striking wide yellow gold engagement ring showcases a bold and sophisticated design, centered around a stunning larger-sized marquise diamond. The marquise diamond is bezel-set in the middle of the ring, creating a distinctive V-shape along the sides. Enhancing the geometric appeal, smaller marquise and princess-cut diamonds are set on either side, adding depth and symmetry. A row of small round diamonds follows the inner V-shaped contours of the design, highlighting the brilliance of the center. A second V-shaped row of round diamonds frames the outer edge, creating a layered effect. The interplay of negative space between the different shapes and diamond rows gives the ring a dynamic, airy feel, balancing bold elegance with intricate detail.
Pear Diamond Engagement Ring With Sunflower Detail
This stunning white gold engagement ring showcases a pear-shaped center diamond set in a full bezel setting, seamlessly integrating with a wide band for a bold and elegant look. On either side of the ring, intricate sunflower designs wind their way up toward the center stone, symbolizing warmth, happiness, and devotion. Each sunflower is brought to life with a vibrant round turquoise at its center, adding a unique pop of color and contrast against the brilliant diamond. The combination of organic floral elements and modern bezel setting creates a one-of-a-kind design that blends nature-inspired beauty with timeless sophistication.
Family Diamond Eternity Tribute Band
This exquisite platinum band is a stunning tribute to family and cherished bonds. Along each edge of the ring, a row of small diamonds sparkles brilliantly, running halfway across the top portion for a refined and elegant touch. The centerpiece of the design features a channel set with alternating gemstones—round diamonds, square tourmalines, and square sapphires—each carefully chosen to represent the birthstones of beloved family members. The sleek platinum band provides the perfect backdrop for the vibrant colors and brilliance of the stones, creating a harmonious and meaningful design. This band is a timeless keepsake to celebrate family.
Nature-Inspired Rose Gold Engagement Ring with Purple Sapphire
This engagement ring was built around a nature motif — twisting branch and vine texture wrapping the band, punctuated by small flower clusters set with tiny round diamonds. The center stone is a 1-carat oval lab-created purple sapphire, chosen after the design moved away from an original moss agate request toward a more durable, color-saturated option. The band is 14k rose gold, narrowed and refined from an earlier, wider version to better suit the wearer’s hand. The result balances an organic, outdoorsy design language with the durability and brilliance needed for a ring worn every day.
Allure Of The Open Sea
This 22-karat gold ring combines nautical charm with classic craftsmanship. Designed in a signet style, it features a circular flat top adorned with a finely detailed compass motif. Encircling the compass is a textured rope design that adds depth and frames the central detail with elegance. On either side of the band, a polished anchor with a delicately wrapped nautical rope provides a subtle, seafaring touch. This thoughtful blend of textures and symbols makes this ring a sophisticated piece for those who cherish the allure of the open sea.
Black Diamond Kite Engagement Ring
This striking platinum engagement ring features a unique kite-shaped black diamond as its centerpiece. The black diamond, with a subtle hint of transparency, creates captivating depth, adding intrigue to its dark beauty. Set securely in a full bezel setting, the geometric shape of the diamond gives the ring a bold, modern appeal while highlighting the stone’s elegance. The sleek, narrow band complements the minimalist design, allowing the kite-shaped diamond to take center stage. The combination of platinum and the mysterious black diamond offers a contemporary and timeless look.
Elegant Silhouette
This silver ring showcases a graceful swooping design that wraps beautifully along the top of the finger. One end of the ring sweeps upward, forming a circular curve that gently cradles and secures a brilliant round moissanite against the band, creating a stunning focal point. The other arm of the ring curves downward, artistically shaping a delicate heart that adds a romantic touch to the overall design. The combination of the swooping lines and the balance between the moissanite and heart creates an elegant and fluid silhouette.
Jade Engagement Ring with Dragon Engraving & Family Stones
This engagement ring was built around a center oval jade cabochon set in a bezel, with small marquise-shaped ruby clusters and single opal accents stepping down each side of the band. The design keeps the top half of the band narrow and detailed while the lower half widens slightly to make room for a laser-engraved dragon motif on the interior surface — a detail meant to be private, seen only by the wearer. Set in 14k white gold for durability and a brighter, cooler tone than yellow gold, the ring balances a quiet, uncluttered silhouette on the outside with personal meaning built into every stone choice. It suits someone who wants an engagement ring that reads as understated from across the room but carries full significance up close.
Star of David Memorial Pendant in Solid 14k Gold
This pendant is made of two separate solid 14k yellow gold triangles, one notched to interlock with the other, designed to hang together on a chain and form a six-pointed Star of David that floats rather than sitting as a single flat piece. Each triangle carries text built directly into the 3D model rather than laser engraved on the surface — a name in Hebrew and English, a meaningful phrase, and a set of dates — set at an angle that follows the edge of the triangle. One face of each piece is high polish and left plain; the lettering sits on the reverse, designed to face inward toward the wearer. The dimensional lettering method was chosen specifically for durability: engraved text can wear away with years of skin contact, while text built into the casting itself does not fade the same way. The piece was designed as the first of two planned memorial pendants, meant to be worn together with a matching cross piece added later.
Sleek Modern Gemstone Ring
This sleek white gold ring features a distinctive flat rectangular top, designed for a modern, bold look. The top is adorned with custom-cut rectangular blue topaz stones, each carefully shaped to perfectly fit the unique dimensions of the ring. These blue topaz stones are channel set, creating a seamless, continuous line of blue along the top of the ring. The channel setting enhances the flow of the gemstones, allowing their color to stand out while maintaining a sleek, clean design.
Two-Tone Braided Twist Ring with Montana Sapphire
This ring pairs a hand-cast rose gold twist with white gold outer rails, built as a low-profile, durable everyday band. A round Montana sapphire sits in a white gold bezel at the center, flanked by five small birthstones representing the couple and their three children. A smooth, unpatterned section is built into the back of the band, making future resizing simpler despite the layered construction. The design was adapted from the couple’s original three-metal wedding band concept, simplified to keep the labor and cost within budget while preserving the twisted, two-tone look.
Family Heraldry Signet Ring
This white gold signet-style ring exudes a powerful and regal presence. The ring’s flat oval top is adorned with a striking dimensional wolf, depicted in a noble stance, evoking strength and honor and reminiscent of ancient emblems of power. Above the wolf, a series of wedge-shaped cuneiform characters are intricately engraved, paying homage to the ancient writing systems of past civilizations. Enhancing the ring’s sides, shield-shaped frames house dimensional wolf heads, each meticulously crafted to mirror the spirit of the central figure. This ring seamlessly blends history and heraldry.
Men’s White Gold Engagement Ring — Soft-Square Pave Sides
This engagement ring was built around a request for a masculine design that still felt refined on a smaller finger. A bezel-set round center stone sits within a softened square top, flanked by pave-set accent diamonds that continue partway down both sides of the band. The band itself was adjusted during the design phase from a concave profile to a flat-sided one at the client’s request, giving the piece a cleaner, more substantial feel without adding bulk. Finished in 14k white gold with a soft-square silhouette, it suits someone who wants a ring that reads as bold but stays proportional to the hand.
Reimagined Diamond Ring Set — Heirloom Stones, New Design
This engagement ring began as two heirloom pieces — an original engagement ring and anniversary band — reimagined into something new. The client’s eight round diamonds were removed from their original settings and reset into two U-shaped bands that curve around a new 2.5-carat lab-grown center diamond, creating a three-ring stack that reads as one cohesive design from the top down. Each piece can also be worn independently: the two diamond bands nest together to form an open cluster ring on their own, while the center solitaire stands alone when preferred. The design went through several rounds of refinement — from a clustered stone arrangement to a cleaner curved line, and from a two-piece ring-and-guard concept back to a three-ring stack — arriving at a low-profile platinum setting that keeps the original stones visible without a bulky frame. A companion pendant using one of the client’s pear-shaped diamonds as a stylized snake’s head was designed alongside the rings.
Graduated Pink Tourmaline Circle Pendant with Floating Diamond
This circular pendant is built around a sequence: fourteen round pink tourmalines, cut in graduating sizes from about 1mm to 4.5mm, cascade around a white gold frame toward a single round diamond set near the center. The diamond sits in a petite partial bezel with one supporting prong rather than a traditional four-prong crown, keeping the setting quiet so the stone reads as if it’s floating just inside the circle. The chain runs through two rings at the top of the frame rather than a standard bail, which helps the piece hang centered despite the stones being concentrated along one side. It suits someone who wants a milestone marked in a literal, countable way rather than through a single symbolic stone, and who prefers a piece with a considered, deliberate design over an off-the-shelf look.
Gold Ruby Set Domed Ring
This distinguished men’s gold ring boasts a classic domed shape, enhanced by an intricate curving and curling pattern that elegantly wraps around its surface. The pattern is polished to a high shine, creating a striking contrast against the matte finish of the background, which adds depth and dimension to the design. At the center of this captivating piece lies an oval-shaped lab-grown ruby, set flush into the top of the ring. The ruby’s vibrant red hue adds a bold touch of color, perfectly complementing the polished gold.
Oval Diamond Ring with Sapphire Marquise Clusters
This engagement ring pairs a 1.05-carat oval lab-grown diamond with two symmetrical clusters of accent stones on either side — three marquise-cut blue sapphires bordered by small round diamonds. The design evolved from an ambitious multi-petal wildflower concept into a cleaner, more wearable cluster arrangement, refined specifically for a wearer with small hands and an active, hands-on daily life. Set in platinum for durability and a bright white finish that won’t require replating, the ring keeps the band deliberately plain and low-profile so the stone clusters read as the focal point without adding bulk between the fingers. A short inside-band engraving with an infinity symbol and heart completes the piece. The result balances a symbolic, nature-inspired design language with the practical demands of everyday wear.
Modern Ruby Segment Ring
This yellow gold ring is a stunning showcase of elegance and sophistication. At its heart lies a captivating round ruby, securely set in a sleek bezel setting that highlights the gem’s vibrant color. The band of the ring features a unique design with square-shaped sections that taper gracefully towards the back. These square segments add a contemporary flair. This ring seamlessly blends modern design elements with timeless beauty.
Recreated Pearl & Tourmaline Drop Pendant Necklace
This 14k yellow gold pendant necklace was rebuilt from faded photographs and a hand-drawn sketch of a piece that had disappeared from the family years ago. Three flat, irregularly shaped freshwater pearls hang with small gold caps beneath a single muted blue-green stone set into a softly curled gold frame. The chain carries small pearls spaced along its length, echoing the pendant’s materials in miniature. The finish was kept brushed and understated rather than high-polish, reflecting the worn, softened look of the original piece after decades of wear. Every element – the pearl shapes, the stone color, the curl of the frame – was refined repeatedly against the client’s memory and photos until it matched. The result suits anyone who wants a quiet, detail-driven recreation rather than a bold statement piece.
Bezel-Set Oval Diamond Ring in 18k Yellow Gold
This ring centers a 0.82 carat oval lab-grown diamond, set using a technique where the gold is hammered fully around the stone’s edge, mechanically locking it in place without visible prongs. The band is substantially domed and widest at the top, tapering gradually toward the back for a comfortable, low-profile fit at a size 4. Cast in 18k yellow gold and finished to a high polish, the design keeps the focus entirely on the stone and the clean, sculptural line of the metal. The result reads modern and minimal, well suited to someone who wants a solitaire that feels substantial without ornamentation.
Heart-Face Line Drawing Pendant in 18k Yellow Gold
This pendant takes a hand-drawn personal mark — a simple heart shape with a face worked into it — and renders it as a clean, single-line engraving across a solid 18k yellow gold disc. The design went through two rounds of refinement: the bail placement was changed to sit on either side of the disc rather than at the top, and the engraved line was thinned to keep the mark looking delicate rather than heavy at this scale. At roughly three-quarters of an inch, it reads as a minimal, everyday piece rather than a statement pendant, and it comes on a matching 18k gold cable chain. The design suits anyone who wants a meaningful personal symbol turned into something wearable without extra ornamentation.
Pear Morganite Engagement Ring in Rose Gold
This engagement ring centers a 1.12-carat pear-shaped morganite in a soft pink hue, set in a five-prong basket that lets light move through the stone. On either side, a cluster of one pear-shaped and one round accent stone tapers down the shoulder of the band, echoing the point of the center stone. The band itself is 14k rose gold with a subtle hammered texture, giving the polished profile a slightly organic, hand-finished quality rather than a flat mirror shine. It was designed for a partner who was drawn to a salt-and-pepper diamond cluster ring but wanted the warmth of morganite at the center instead of a colorless stone. The result keeps the asymmetric, clustered silhouette of the original inspiration while shifting the palette toward blush and rose gold. It suits someone who wants a pear-shaped centerpiece without a fully traditional solitaire look, and who is drawn to a ring with movement and a slightly textured, low-profile band that sits comfortably day to day.
East-West Sapphire Ring in Platinum — Anniversary Design
This platinum ring centers on a substantial cushion-cut blue sapphire, supplied by the client and set in an east-west orientation inside a four-prong basket. The band tapers from a fuller 3mm at the top down to just under 2mm near the base, keeping the overall profile refined despite the scale of the center stone. The support between the shank and the basket was refined during design review, blending the transition for a cleaner line while preserving the structure that protects the stone. A short inscription is engraved on the interior of the band. The design suits someone who wants a bold, statement-making center stone presented with restraint rather than heavy ornamentation, and who is comfortable removing the ring for higher-impact activities.
Three Layer Diamond Ring
This stunning wide white gold ring exudes timeless elegance. The ring features three rows of channel-set round moissanite stones, each row running continuously all the way around the band. The meticulous setting showcases the dazzling sparkle of the moissanite stones, creating a continuous shimmer from every angle. The three separate channel rows add depth and dimension to the design, making it a statement piece that beautifully combines modern style with timeless sophistication.
Emerald-Cut Moissanite Ring with Hidden Halo in White Gold
This engagement ring centers a custom-cut emerald-shaped moissanite, narrowed slightly from a standard cut for a more elongated silhouette, set above a hidden halo that adds brightness without changing the ring’s clean profile from the top. Round moissanite accents run halfway down each side of the band in a shared-prong setting, stopping before the point where the ring would rest against the finger to reduce rubbing. The piece is finished in 14k white gold, chosen over the originally planned sterling silver for greater durability during travel and exposure to water. The inside of the band carries a private engraving. It was designed specifically as a lower-profile companion piece — something that could be worn in place of a more valuable ring when traveling.
Wide Gold Band With Small Star Set Diamond
This yellow gold band is a loving tribute, meticulously crafted to replicate the original wedding band worn by a cherished grandmother. The solid band features a slightly domed surface, echoing the classic elegance of the original piece. At its heart, a single round diamond is securely set with small prongs, creating a delicate star-like pattern around the stone. This central diamond adds a touch of sparkle. The combination of timeless design and sentimental value makes this ring a beautiful and meaningful heirloom for the family.
Teal Montana Sapphire Engagement Ring with Tapered Diamonds
This engagement ring centers a bi-color teal-green emerald-cut Montana sapphire, set in a four-prong mounting in 14k yellow gold. Flanking the center stone are two custom-cut, elongated kite-shaped lab-grown diamonds, chosen after the client requested a more dramatic silhouette than the original tapered baguette design. The side walls were built flatter and flush specifically so a wedding band can rest against the ring without gapping, allowing for future stacking. The inside of the band carries a small engraved initial. The design balances a colored center stone with a contemporary three-stone silhouette, built for someone who wants a non-traditional engagement ring that still reads as polished and cohesive.
Moissanite Solitaire Engagement Ring in 14k White Gold
This engagement ring pairs a round moissanite center stone with a slim 14k white gold band lined in small pave-set diamonds. The design was modeled closely on a ring the client already loved, with the center stone set in a simple four-prong setting and the accent stones set low, flush with the band surface rather than raised above it. The result is a clean, classic solhouette that reads as a traditional diamond solitaire while keeping the stones secure and comfortable for daily wear. It suits someone who wants a familiar, timeless engagement ring silhouette without the cost of mined diamonds throughout.
Colorful Gemstone Wedding Ring
This stunning yellow-gold ring features two dazzling rows of stones. The top row showcases an eye-catching arrangement of lab-grown alexandrites, emeralds, blue sapphires, and purple sapphires, creating a vibrant and colorful display. Parallel to this row, a continuous line of smaller aquamarine stones encircles the entire ring, adding a subtle and elegant sparkle. The combination of these precious stones against the warm gold setting makes this ring a truly unique and stunning piece.
Sapphire Bridal Set — Yellow Gold Ring & Curved Band
This bridal set pairs a round teal-blue sapphire engagement ring with a custom-contoured wedding band, both in 14k yellow gold. The center stone was sourced and shipped in by the client, then scanned to build the setting precisely around its dimensions. Pointed prongs cradle the sapphire and echo through a single point stone on the wedding band, while clustered round diamonds flank the center stone and cascade across the band in a feathered arrangement. The wedding band was shaped to nest flush against the engagement ring, creating one continuous line when worn together. Diamond accents throughout are VS1 clarity with F-G color, chosen for a bright, clean sparkle. The design balances a classic three-stone silhouette with a more contemporary cluster detail on each side, suited to someone who wants a center stone with personal meaning set in a understated, cohesive pairing.
Family Love
This White gold ring showcases a captivating round lab-grown Ruby at its heart. Held securely in place by sleek bypass arms that run parallel to each other, the Ruby exudes a radiant allure. Adding a personalized touch, an array of colored stones adorns the bypass arms. Seven exquisite gemstones grace each arm, symbolizing the unique birthstones of beloved grandchildren. Each stone, meticulously selected and expertly set, celebrates the cherished bond shared with each grandchild. With its elegant design and heartfelt symbolism, this ring serves as a timeless testament to the enduring love shared within a family across generations.






















































































































