Every piece here started as a real conversation with a real client, with a reason behind it, a story, and a lot of emotion. We’re not showing you a catalog. We’re showing you what’s possible, so you can design your own.

Tanzanite Engagement Ring with Emerald Accents in Gold

This engagement ring centers a kite-shaped tanzanite in a deep violet-blue, flanked on either side by a round emerald. Small diamond accents are set into the shoulders of the 14k yellow gold band, which carries a knotwork-inspired texture along its length. The ring is the middle piece of a planned three-ring set, designed to stack together, though it also reads as a complete, wearable engagement ring on its own. The combination of a colored center stone with emerald accents gives it a distinctive look for anyone drawn to nature-inspired, non-traditional engagement ring design.

more

Celtic Knot Pendant with Chicago-Inspired Star Detail

This round sterling silver pendant combines Celtic knotwork with a nod to Chicago through its star detailing, joining two personal touchstones into one dimensional design. A trinity knot sits at the top, flanked by interlocking knot panels that form a Y-shaped silhouette down to a column of six-pointed stars. Two sets of initials are engraved along the outer rim, with space left open for a third to be added later. The piece is cut out for dimensional depth rather than left as a flat solid disc, and it comes on a 20-inch silver box chain. At roughly one inch across, it reads as a substantial, wearable piece rather than a delicate accent.

more

Scorpion Signet Ring — Greek Key & Sapphire Detail

This men’s signet ring was designed to honor both a Greek heritage and an Irish one in a single piece. A dimensional scorpion sits at the center of the round face, scaled and curled so its tail wraps close to the body rather than projecting outward, set against a deep blue enamel field and bordered by a continuous Greek key pattern. Two small round sapphires flank the scorpion’s claws for color and symbolic accent. The sides of the ring carry the personal heritage detail: one flank is worked with a Greek Hercules knot integrated with the alpha and omega symbols, and the other carries a Greek-style triskele layered with an ouroboros serpent. Cast in sterling silver with a mix of raised dimensional work and open filigree detailing, the ring reads as a substantial, classic men’s signet piece rather than a delicate accessory. It suits a wearer who wants a ring dense with personal meaning rather than a single simple motif, and who is comfortable with a bold, sculptural presence on the hand.

more

Celtic Cross

This stunning Celtic cross pendant is a meaningful symbol of faith and heritage, beautifully crafted to tell your unique story. Its intricate knotwork, inspired by classic Celtic designs, weaves tradition and artistry into a timeless piece that carries deep spiritual significance.

Measuring 1.5 inches by 0.75 inches, this pendant is meticulously crafted in high-quality sterling silver, balancing durability with elegant shine. The detailed floral motifs bring a touch of nature’s grace, while the perfectly interlaced knots encircle the central circles, symbolizing eternity and interconnectedness. Suspended from a delicate 18-inch silver cable chain, this pendant is designed to complement any style with sophistication and personal meaning.

more

Gothic Moonstone Skull Engagement Ring

This hauntingly beautiful white gold ring is a masterpiece of dark romance and intricate symbolism. At its center lies a rare, coffin-shaped faceted moonstone, which emits an ethereal, otherworldly glow as it catches the light. Flanking this centerpiece are two meticulously sculpted skulls, adding a bold, macabre elegance to the design. The band features a continuous Celtic knot pattern that winds up the shoulders, representing eternal connection. Adding a hidden layer of luxury, the side profiles are pavé-set with a striking combination of vibrant round rubies and brilliant white diamonds. This ring is a powerful statement piece, blending ancient motifs with a modern gothic aesthetic.

more

Infinity Clover Engagement Ring

This enchanting yellow gold engagement ring is a masterful blend of symbolic storytelling and vibrant color. At its center, a brilliant oval diamond is held in a classic four-prong setting, radiating timeless elegance. The band itself is a work of art, featuring a continuous infinity-inspired motif that represents a love without end. Integrated into the flowing gold lines are delicate clovers, symbols of extraordinary luck and shared fortune. These botanical elements are accented by vivid marquise-cut emeralds, which serve as lush green leaves nestled within the infinity loops. This ring is a profound and luckky talisman for a life together.

more

Flower Halo Engagement Ring Inspired by a Grandmother’s Ring

This engagement ring centers on a round flower-shaped cluster of lab-grown diamonds, designed as a larger, more elaborate homage to an antique family ring. A wide 14k yellow gold band widens at the shoulders and carries a channel of round diamonds along one side, while the top is subtly elevated to let a future wedding band tuck flush beneath it. Underneath the flower, an openwork gallery combines a Celtic knot with an infinity symbol — a detail chosen to reflect the wearer’s heritage and background in mathematics. The design moved through several rounds of refinement, from band width to flower size, before arriving at its current scale and proportion, and was built specifically to feel substantial without crowding the knuckle.

more

Celtic Knot Wedding Set

This captivating white gold wedding set features a harmonious design rich in meaning and artistry. The engagement ring showcases a horizontally set marquise-shaped gray-blue spinel at its center. Above the center stone lies a detailed Celtic knot, symbolizing eternal love and unity. The accompanying wedding band mirrors this intricate knot, creating a balanced and symmetrical design. Both rings feature gracefully curved, narrow bands that allow them to interlock seamlessly. When worn together, the marquise spinel is beautifully framed between the two Celtic knots, completing the design with perfect alignment and symbolism.

more

Celtic Contour Wedding Band

This custom platinum wedding band was thoughtfully designed to complement an existing engagement ring while combining the client’s love of Celtic and natural motifs. At the center of the band lies an intricately detailed Celtic knot, symbolizing unity and eternity. Flowing from either side of the knot, delicate flowers and leaves weave gracefully along the band, adding an organic and romantic touch. Scattered among the natural elements, a few small diamonds provide subtle sparkle and contrast against the cool platinum. The Celtic knot forms a gentle V-shape at the center, perfectly crafted to fit snugly alongside the engagement ring.

more

Celtic Heart Pendant with Sapphire and Engraved Dates

This pendant takes an interlocking Celtic-knot heart design and reworks it in 14k yellow gold, replacing an original diamond-accented version with a single round lab-created sapphire set at the center. The open, woven linework leaves just enough surface along the heart’s upper curves for two short engraved dates, a detail the design team had to work around given the piece’s airy, see-through structure. It hangs on a substantial sterling silver cable chain chosen specifically for durability and everyday security. The combination of warm gold, cool blue stone, and silver chain gives the piece a deliberate two-tone look, and the knotwork construction makes it suited to anyone drawn to symbolic, interlocking designs with personal meaning built in.

more

Initial And Celtic Knot Double Necklace

This exquisite custom necklace set features two 14k white gold pendants. One with a trinity knot design and the other with the initials MP, each adorned with elegant natural round diamonds. The pendants are suspended on a sophisticated double 14k white gold cable chain, enhanced by four princess cut diamonds artfully spaced along the necklace. Designed to perfectly balance boldness and refinement, this unique piece combines personalized craftsmanship with high-quality materials, creating a timeless expression of individuality and style.

more

Gothic Celtic Engagement Ring with Black Spinel & Amethyst Halo

This engagement ring centers a custom-cut marquise black spinel, bezel-set and surrounded by a halo of small round purple accent stones. The band is 14k white gold, finished in black rhodium plating with an open Celtic-knot weave left in polished white metal on both shoulders, creating a two-tone contrast between the dark plating and the bright metal pattern. Designed around a client’s preferred color palette and gothic-leaning aesthetic, the piece pairs a durable bezel setting with a distinctive woven band structure. It suits someone drawn to dark, symbolic design language who still wants a wearable, daily-use engagement ring.

more

White Eagle & Celtic Knot Pendant — Two Heritages, One Piece

This pendant combines two national symbols into a single cut-out design: a crowned white eagle, the heraldic emblem of Poland, standing above an interlocking Celtic triquetra knot representing Ireland and Scotland. Cast in 14k white gold, the piece is fully open-worked so light passes through the wing feathers and knotwork rather than sitting against a solid backing. At approximately one inch in length, it is sized to be a clear, readable statement piece rather than a delicate accent. The pendant was designed without a chain, intended to be worn on an existing white gold chain, and suits anyone who wants a wearable expression of blended family heritage rather than a single-culture symbol alone.

more

Celtic Cross Recreate

This pendant was lovingly recreated for a client who wanted to preserve the spirit of a cherished original. Measuring 2 inches tall, it features a striking blend of sterling silver and 10kt yellow gold. The design centers around a bold gold cross framed by a polished silver outline, layered over an intricately woven Celtic knot motif—symbolizing eternal love and faith. The combination of precious metals and meaningful pattern work makes this piece a powerful expression of personal devotion and heritage.

more

Recreated Heirloom Ring — Woven Gold Band, Blue Topaz

This ring was recreated from photographs of a family heirloom that had been lost. Built in 14k yellow gold, it centers a round blue topaz held in a four-prong setting, flanked on both sides by a woven, crisscross gold pattern that tapers into a smooth polished shank toward the back of the band. The design keeps the visual weight at the top of the finger while thinning out where the ring meets the hand, echoing the shape the client remembered from the original piece. It suits someone who wants a design rebuilt faithfully from limited reference material rather than a fresh, unrelated design.

more

Yin-Yang, Peace & Knotwork Trio Pendant in Sterling Silver

This sterling silver pendant brings together three separate symbols the client wanted to wear as one connected piece: an intricate Celtic-style knot design, a yin-yang disc, and a peace symbol, all contained within a rounded triangular cut-out frame. The yin-yang sits at the visual center, with the knot and peace symbol positioned to its sides as originally specified. Rather than using enamel, the yin-yang’s two halves are distinguished with a high-polish plain metal surface on one side and a contrasting matte finish on the other, keeping the piece entirely tonal in silver. The pendant hangs from a thin sterling silver rope chain sized to sit at the center of the chest. It suits someone who wants several personal symbols read as a single, connected design rather than scattered separately, and who prefers a clean silver finish over enamel color.

more

Celtic Infinity Pattern Men’s Wedding Band in White Gold

This men’s wedding band pairs a flat, low-profile white gold shank with a recessed, interlocking knot motif that repeats continuously around the entire circumference. The pattern was refined over several rounds so the repeating symbols connect seamlessly with no visible gap, giving the design a woven, unbroken look. Black rhodium plating fills the recessed pattern and coats the band to match the color of his wife’s ring, while narrow polished borders frame the design along each edge. At 5mm wide, the band sits comfortably for daily wear without stones, keeping the surface flat and catch-free. The piece suits someone who wants a wedding band with quiet symbolic detail rather than a plain or stone-set design.

more

Wide Yoke Band

The distinctive charm of this Platinum Ox Yoke band is sure to catch attention. This wide Platinum band boasts a unique design inspired by the traditional ox yoke. The yoke is detailed and raised above the band’s surface allowing an emphasis to be put on the craftsmanship of its small details. Within the u-shaped openings of the yoke, two bezel set stones are featured. A diamond in one and a blue sapphire in the other. The matte finish on the band’s surface provides a subtle backdrop to the polished yoke design.

more

Dragon Dwarf Ring

This white gold ring is nothing short of a masterpiece, showcasing a captivating lab-grown ruby at its heart. What truly sets this ring apart are the intricately detailed motifs on each side. On one side, a majestic dragon soars, protectively clutching a small emerald in its talons. On the opposite side, a resolute mining dwarf stands brandishing an ax to safeguard his gems as he holds an amethyst in his free hand. The frame surrounding the ruby is adorned with laurel-like design, adding a touch of elegance and completing the intricate story the ring tells.

more

Trinity Knot Pendant — Three Diamonds, 14k White Gold

This pendant takes the classic Trinity knot — a symbol rooted in Irish heritage — and sets a round lab-created diamond at each of its three inner points. Crafted in 14k white gold with a complementary sterling silver chain, the piece was sized to sit at a comfortable, visible length without reading as oversized. Each of the three diamonds was chosen to be meaningful rather than purely decorative, and the open knotwork design keeps the piece feeling light despite the stone detail. It suits anyone drawn to symbolic jewelry that carries a layered meaning — family, heritage, and a long partnership — in a single, wearable form.

more

Ruby And Diamond Celtic Band

Elegance meets tradition in our custom Celtic knot gemstone ring. Crafted in stunning platinum, this 6mm-wide band showcases intricate Celtic knot details adorning the sides, adding a touch of timeless symbolism. At its heart, three radiant gemstones steal the show: a brilliant round diamond embraced by the fiery allure of round rubies on each side. Celebrate love, unity, and style with this exquisite custom piece.

more

Elk Head & Crossed Axes Pendant — Silver Norse Design

This round sterling silver pendant combines Norse mythology and outdoor imagery into one wearable design: a dimensional elk head rises above a pair of crossed axes, the rune for protection worked subtly into the antlers. The background is given a matte finish specifically to help the raised center design stand out against the polished rim and bail. At roughly an inch across, the piece is sized to be noticeable without being heavy or flashy, and it was designed from the outset as a daily-wear piece rather than an occasional one. It suits anyone who wants a wearable nod to Norse symbolism and the outdoors without resorting to loud or jagged design language.

more

Men’s Platinum Wedding Band with Channel Sapphires

This men’s wedding band pairs a substantial platinum profile with two princess-cut blue sapphires set flush into a channel near the top of the band. The band was widened slightly beyond a standard 5mm to properly proportion the paired stones, and a brushed finish replaces the original polished render for a quieter, more textured surface. The interior carries a personal engraving — including a claddagh symbol and a short phrase — positioned off-center and flanked with open space specifically so the ring can still be resized later without disturbing the design. Built for daily wear, the piece balances a clean, classic silhouette with a meaningful, hidden detail only the wearer knows is there.

more

Triple Moon Celtic Pendant in White & Rose Gold

This round pendant combines an openwork Celtic knot border in white gold with a rose gold quaternary knot accent at the top and matching rose gold detailing worked into the knotwork. At the center, two white gold crescent moons flank a cabochon rainbow moonstone, forming a triple-moon design. The piece was built specifically to be hypoallergenic, using 14k gold throughout rather than a plated or mixed-metal alternative. A protective symbol was worked into the knotwork, and the back carries a small engraved detail the wearer asked to keep discreet. The pendant sits at approximately 1.25 inches and is designed to hang from the wearer’s own chain. It suits anyone drawn to moon-phase symbolism and understated protective imagery rather than overt statement pieces.

more

Viking Axe Earring

This unique single earring is crafted in the shape of a Viking axe, featuring a polished white gold blade and a yellow gold handle. The handle is detailed to represent leather wrappings with a textured finish. The blade of the axe is adorned with two stunning emerald cabochons, one set on either side of the blade. Engraved into the blade on either side is a Celtic symbol that adds a touch of mystique to the piece. The axe hangs from a white gold earring hoop allowing for movement. With its attention to detail and creative design, this Viking axe earring is sure to make a bold statement.

more

Celtic Knot Engagement Ring

This beautiful custom engagement ring is made of platinum and features a timeless combination of vintage details like milgrain and a Celtic knot design on the sides. The center stone is a kite set cushion cut 6mm moissanite that sparkles brilliantly along side the lab created diamond accent stones.

more

Gold Celtic Knot Pendant

This 14k yellow gold trinity knot pendant is a beautiful symbol of everlasting love and devotion. Its unique cut-out style and round genuine emeralds set in each corner make this piece stand out with sophistication and elegance. It measures approximately 1.25 inches or 32mm in size.

more

Trillion Emerald Engagement Ring

This custom engagement ring is the perfect symbol of never-ending love. The centerpiece of the ring is the trillion lab created emerald, set in white gold. This unique design includes a trinity knot on one side and a Fleur de Lis on the other. To make the ring even more special, it have been engraved with “And it is only the beginning.”

more

Claddagh Ring Gift in Sterling Silver — Crowned Heart Design

This sterling silver Claddagh ring reproduces the traditional Irish design in full: two hands clasping a crowned heart at the center, flanked by a rope-textured band on either side. The symbolism is centuries old — the hands represent friendship, the crown loyalty, and the heart love. Cast in polished sterling silver, the ring was made as a second piece, built to match an original the client already owned, so a friend could have the same design made for them. The twisted texture on the shoulders adds dimension without competing with the central motif, and the piece suits everyday wear for anyone drawn to classic, symbolic jewelry.

more

Family Clover Ring

This classic14k yellow gold ring is a recreateion of a beloved family heirloom. The ring features a round moissanite center stone, with antricate clover detail on either side. The band tapers at the bottom, creating a unique and eye-catching effect. This special piece of jewelry is sure to evoke feelings of love and remembrance, and its timeless design makes it the perfect keepsake to be cherished for generations. This beautiful ring was recreated as the original was lost, and its beauty will be treasured for years to come.

more

Celtic Knot Pendant — Client-Designed Trinity Knot in Gold

This pendant began as the client’s own sketch of a Celtic knot — a personal design she wanted reproduced faithfully in solid metal rather than purchased off the shelf. The finished piece is a dimensional, openwork knot just under an inch tall, cast in 10k yellow gold so it could be soldered onto an existing sterling silver necklace without damaging a plated finish. In place of a standard fixed bail, the pendant was made with an open jump ring at the top, since the client planned to attach it herself to a chain made of connected Celtic knots and intended to have the connection professionally soldered afterward. The open, dimensional knotwork is cut through rather than engraved, giving the piece depth and movement from multiple angles. It suits anyone who wants a meaningful personal symbol translated into a lasting, wearable form, and who has a specific existing piece they want it to join.

more

Tree of Life Pendant with Hidden Bear Head Back

This pure silver pendant combines two design languages on a single oval form. The front is an openwork Tree of Life rendered in Celtic knotwork — swirling roots, a woven canopy, and spiral details drawn from a reference the client provided. The back, added later in the design process, carries a bear’s head in profile framed by a Celtic knot border, a tribute to a detail from the client’s grandfather. The pendant is cast in pure (fine) silver with a sandblasted matte background on both sides to bring the linework forward, and hangs from a 22-inch leather cord. It suits anyone drawn to symbolic, nature-rooted design with a personal story worked into a surface most people will never see unless they look.

more

Healers Ring

This ring was created as a gift for a nurse and has healing as it’s design inspiration. This sterling silver ring is adorned with intricate Celtic knot details. At the center of this captivating ring, a mesmerizing trillion-shaped aquamarine gemstone is held in place by a beautifully crafted healer’s knot. The band of the ring is adorned with a custom message, engraved in Old English script, adding a personal touch.

more
A platinum, cut-out Celtic heart knot pendant set with a continuous row of small pave diamonds, hanging from a fine cable chain against a marble background.

Celtic Heart Knot Pendant in Platinum with Diamonds

This pendant takes the traditional Celtic heart knot — a symbol with no beginning and no end — and renders it in platinum with a fully cut-out silhouette so the interlocking loops read clearly from any angle. Round lab diamonds are pave-set along the entire knotwork pattern, following the curves of the design rather than sitting in a single cluster. The open design keeps the piece light despite the density of stones, and platinum was chosen for its durability and naturally white tone, which will not fade or require replating over time. It suits anyone drawn to Celtic symbolism who wants a piece with genuine sparkle rather than a plain engraved outline.

more