Every piece here started as a real conversation with a real client, with a reason behind it, a story, and a lot of emotion. We’re not showing you a catalog. We’re showing you what’s possible, so you can design your own.

Contour Wedding Band with Filigree & Diamond Point

This wedding band was designed as a companion piece to an existing engagement ring, built to follow the exact contour of the ring’s halo so the two sit together without gapping or rubbing. The top surface carries a hand-engraved scroll filigree pattern that continues around the side profile of the band, bordered by fine milgrain beading. A graduated cluster of round lab-grown diamonds is set at the center point, flanked by the filigree rather than running the full length of the band, keeping the pattern legible and the accent stones secondary to the engagement ring’s center stone. The band was refined through a resin fit-test before casting to confirm the two rings nested correctly. Cast in 14k yellow gold, it suits someone who wants a wedding band that reads as part of a single design with their engagement ring rather than a separate piece.

more

Engraved Silver Sword Pendant With Peridot Hilt Stone

This sword pendant was designed as an engagement-season gift, built around a knight’s-sword silhouette with a gently curved crossguard and a rope-twisted grip. A round peridot sits bezel-set at the center of the guard, and the blade carries an engraved date with a small heart detail. The bail is formed from the top of the hilt itself, so the chain attaches directly to the pendant’s structure rather than through a separate jump ring — a deliberate choice for anyone who works with their hands and needs jewelry that can take daily wear without extra points of failure. Filigree scrollwork echoes across the guard, and the piece is sized on the smaller side for a subtle, wearable statement rather than an oversized costume piece.

more

Platinum Harp Pendant — Graduation Gift for a Performer

This pendant reimagines a pedal harp in miniature, cast in platinum and built with genuine instrumental proportions rather than a simplified silhouette. The scrolled crown, vertical strings, tapering soundboard, and open filigree scrollwork on the reverse were all modeled to reflect a real harp’s construction. Round stones alternate along the harmonic curve, tapered and standard baguette-cut stones run diagonally down the soundboard, and small round accents sit at the base near the feet. Several of the soundboard stones were custom cut to match the harp’s true taper rather than using off-the-shelf sizes. The piece suits a musician or performer who wants a wearable version of their instrument rendered with real architectural accuracy, sized to be noticed under stage lighting.

more

Edwardian-Style Diamond Cross Pendant Recreation

This platinum cross pendant was rebuilt from photographs and appraisal notes describing an Edwardian original that measured 54mm tall and roughly 3.5 carats. Round lab-created diamonds fill the body of the cross, with five larger stones set at the center and the four points, and smaller diamonds set between them along the arms. The four tips carry a pointed, bezel-framed detail in place of a flat square edge, echoing the filigree the client remembered from the original. The design was thinned during production from an initial 3mm profile down to 2.5mm, and the gold backing shown in the first render was removed in favor of an all-platinum construction so the diamonds are visible from both the front and back. It suits someone recreating a specific heirloom from memory and old photos rather than starting from a blank design brief.

more

Gothic Ornate Engagement Ring

A dramatic featuring a vivid central stone framed by intricate filigree and accent stones. Clients could adapt metal color, gemstone hues, or detailing density for a lighter or bolder interpretation

Black Enamel Statement Ring — Bold Gold Filigree Band

This men’s ring was designed as a gift, built around a bold square silhouette that frames a round moissanite in a black enamel border. Gold-plated sterling silver carries the design, with open scrollwork filigree cut into the shoulders on either side of the center stone for a detailed, dimensional look from every angle. The combination of a graphic black-and-gold frame with a bright center stone gives the piece a strong, masculine presence without relying on a large stone alone. It suits someone who wants a statement ring with real detail up close, not just from a distance.

more

Birthstone Cross Pendant — Gold Family Necklace

This 14k yellow gold cross pendant was designed to carry three birthstones: one for each parent and one for their baby, due later in the year. The outer edges of the cross are detailed with delicate beaded scrollwork and small fleur-de-lis terminals, echoing the design language of a family ring made previously for the same family. A round diamond sits at the top of the vertical arm, with a ruby and a garnet set at the ends of the horizontal arms, leaving room for the third stone once it could be confirmed. The pendant hangs from a 14k gold box chain and was sized to sit comfortably at just under an inch, keeping the piece wearable as an everyday piece rather than a statement one.

more

Symbol Medallion Pendant — Sterling Silver, 3-Inch Detail

This large sterling silver pendant was built around a densely symbolic reference image, translated into a 3-inch raised design so the smaller details could survive casting. A central star sits inside a sunburst/flower motif, surrounded by a phoenix-like bird, wheat stalks, scrollwork, and two yin-yang symbols, all rendered in high-relief polished silver. The scale was a deliberate choice — a 1-inch version could not have carried this much detail, so the design was sized up to 3 inches specifically to preserve the reference image’s density of symbols. It hangs on a 2.8mm sterling silver cable chain sized to the client’s preference. This piece suits someone who wanted a single wearable object to carry many personal symbols at once rather than choosing just one.

more

Men’s Onyx Signet Ring — Custom Palm & Plumeria Carving

This ring recreates the wearer’s original piece in 18k white gold, replacing the standard-cut center stone with a rectangular black onyx cut to follow the exact geometry of the setting rather than a standard gem shape. Scrollwork filigree frames the stone on the top face, while the two side panels were custom designed with a beachy, masculine aesthetic — a palm-leaf carving on one side and a plumeria flower motif on the other, both developed from reference images the client provided. The inside of the band carries a personal engraving in cursive script. The combination of a substantial signet profile, hand-carved dimensional side panels, and a non-standard stone cut makes this a technically demanding recreation rather than a simple duplicate.

more

Pumpkin Initial Ring — Two Kids’ Initials in Silver Vine Band

This ring centers on two dimensional pumpkins cast into a scrolling vine band, each pumpkin carrying a small enameled initial in violet. The vine motif was refined through several rounds of design review to land on a smooth, softly rounded pumpkin shape rather than a heavily grooved one, and the open filigree scrollwork on the band echoes the curling vine theme without adding bulk. Made in 14k white gold, the piece was designed for nickel-sensitive skin and for daily wear. It suits someone who wants a personal, nature-inspired ring with a playful seasonal motif that still reads as fine jewelry rather than costume novelty.

more

Enchanting Engagement Ring

This enchanting ring is a celebration of two beloved worlds: Harry Potter and Disney. At its center shines a majestic princess-cut emerald. The band of the ring is adorned with a replica of Harry Potter’s iconic wizard wand, gracefully wrapping around the finger. On either side of the wand, intricate patterns inspired by the Hufflepuff house crest evoke the spirit of Hogwarts. A small diamond adorns the top of the wand, casting a radiant sparkle, while on the opposite side of the emerald, three small diamonds form a whimsical arrangement reminiscent of Mickey Mouse, symbolizing the joy and wonder of the Disney universe. This ring is a testament to the enduring magic of fantasy and imagination, bringing together two cherished worlds in one captivating piece.

more

Art Deco Garnet Trilogy Ring in 14k Yellow Gold

This ring recreates a vintage art deco three-stone garnet design found by the client in an online vintage listing. Three round garnets, selected specifically for a true red tone rather than a brown or near-black hue, are set in a row with simple prong heads. The setting is flanked above and below by scalloped, sand-textured petal motifs that echo the original piece’s distinctive finish, while the shank features polished scrollwork filigree along the sides for additional period-appropriate detail. Cast in 14k yellow gold, the ring balances dense ornamental detailing with a comfortable, rounded profile suited to everyday wear. It suits someone drawn to antique design language who wants the specific details of an admired piece recreated faithfully rather than loosely reinterpreted.

more
A round 14k yellow gold pendant with two crossed anchors at the center, a border of small diamonds and filigree detailing, and a teardrop-shaped pearl hanging below, on a gold cable chain.

Nautical Anchor Pendant with Diamond Filigree & Pearl Drop

This pendant centers on a round 14k yellow gold disc with two crossed anchors cast in relief, framed by a scalloped border set with small round diamonds along the sides and single diamonds marking the top and bottom. A teardrop pearl hangs beneath the disc on a short connector designed with extra jump rings to keep it moving freely without kinking. The piece is finished in a polished gold throughout, hung on an 18-inch cable chain. It was designed as a second piece in a nautical-themed series, refined through several rounds of sketches to settle on the anchor placement, border pattern, and stone layout.

more

Two-Tone Heirloom Wedding Band Recreation

This wedding band was rebuilt as a faithful recreation of a piece that had been worn for decades before it was lost. The design uses a three-part construction — yellow gold outer rails flanking a white gold center band — to recreate the original two-tone look, with the negative-space cut-out pattern reproduced from photos and memory. Recessed lines run along each yellow gold rail, and the open floral and geometric motifs alternate around the band to echo the worn original as closely as possible. At 6-7mm wide with slender rails, the design leans delicate rather than bulky, matching the client’s preference for a lighter, more refined profile than the heavier two-tone bands often seen in this style. The piece suits anyone looking to carry a family design forward without losing the handmade, slightly irregular character of a decades-old original.

more

Recreated Vintage Filigree Ring — Lost Heirloom Reborn

This oval-faced ring was rebuilt in sterling silver with white rhodium plating, recreating a vintage band from description and photographs alone. The face carries a scalloped, filigree-inspired border with small cut-out details where the top and bottom bands meet — a detail the client specifically recalled from the original. The rest of the shank is left smooth and solid, matching the plain band of the piece it replaces. The oval was widened slightly from the first design after the client measured against the original with a ruler, bringing the proportions closer to what she remembered. It suits anyone recreating a worn or lost ring from incomplete documentation — no appraisal, no paperwork, just memory and a willingness to refine the details until they feel right.

more

Mary Medallion

This exquisite 14k yellow gold pendant is a true expression of faith and devotion. The oval pendant features a beautiful and intricate figure of Mary in dimension, surrounded by a delicate border that adds to its elegance. The back of the pendant is engraved with the powerful Hail Mary prayer, making it an extraordinary piece of religious jewelry. Measuring at 20mm and with a bail to fit 3mm chain.

more

Art Deco-Inspired Floral Pendant in White Gold

This rectangular pendant draws its structure from a vintage Art Deco brooch design, reworked into a 1.5-inch pendant with a hidden bail so the chain appears to emerge invisibly from behind the piece. The border is lined with pave-set diamonds inside a geometric triangle-and-line frame, with baguette diamond accents marking the top and bottom points. At the center, an openwork floral cluster is hand-finished in 14k white gold, its petals carved in metal rather than stone, with two cabochon moonstones and several cabochon blue sapphires set into the flower centers for color. The piece is finished with an 18-inch 14k white gold chain. It suits someone drawn to period-specific design language who wants a piece with real dimensional carving rather than a flat engraved surface.

more

Filigree 6-Prong Diamond Engagement Ring

A 14k yellow gold engagement ring with filagree details set with a round lab created diamond center stone.