Every piece here started as a real conversation with a real client, with a reason behind it, a story, and a lot of emotion. We’re not showing you a catalog. We’re showing you what’s possible, so you can design your own.
Dimensional Key Pendant in Platinum with Fire Opal Eye
This pendant takes the shape of a key with a distinctive silhouette: two curved, horn-like wings flank a circular center where a round fire opal sits like an eye, catching red-orange flash against the polished platinum. The lower half tapers into stylized key teeth, and the whole piece was built with real dimension and roundness rather than a flat engraved surface. Cast in solid platinum for durability and weight, the pendant was designed at a size that reads clearly at a distance without feeling oversized. The bail was custom-sized to fit a slim 2.4-3mm chain so it could be worn on an existing necklace. It suits someone who wants a fantasy or symbolic design rendered with real jeweler’s dimension and craftsmanship rather than a flat pendant.
Fish Hook Pendant — Gold Logo Design with Emerald Eye
This pendant reshapes a logo’s lettering into a wearable emblem: a billfish curving into a fish hook, cast in solid 18k yellow gold with a raised outline that traces the design’s edges. A single round emerald sits as the fish’s eye, the only stone on the piece. It hangs on a 2.5mm rope chain, permanently attached to the bail for security given the gold content, and finished to a polished shine throughout. The design translates a two-dimensional mark into a compact, dimensional pendant suited to daily wear.
Black & Red Enamel Chain-Link Wedding Band in Gold
This wedding band pairs 14k yellow gold with black and red hot enamel to create a bold, graphic look. A chain-like pattern of elongated gold ovals and one hexagonal link runs around the full circumference, raised above a recessed black enamel background and framed by twin red enamel stripes near each edge. The design went through several rounds of refinement to balance a specific visual reference against real casting and plating constraints, landing on a version where the gold pattern and red enamel sit flush at the same height while the black enamel recesses slightly beneath. Black rhodium plating was added to part of the outer edge for additional contrast. Built at a 6mm width for a substantial but wearable everyday band, this design suits someone who wants a wedding ring with real graphic personality rather than a traditional plain band.
Pixel Character Pendant in Sterling Silver with Black Rhodium
This pendant translates a blocky, pixel-art digital image into a three-dimensional sterling silver piece. The design was refined through several rounds of review, moving from a flat render to a full 3D model so the client could evaluate the dimensional blocks before committing. The final piece uses black rhodium plating on the recessed background blocks to create contrast against the polished silver foreground, making the pixelated character read clearly in physical form. A cable chain and lobster clasp complete the piece, which sits at approximately one inch in height. It suits anyone who wants to carry a piece of digital art or a personal collectible into a wearable, everyday format.
Two-Tone Enamel Band with Bird Motifs and Cipher Detail
This sterling silver band translates a favorite video game ring into a piece meant for daily wear. An 8mm profile carries a deep blue enamel background inlaid with raised yellow gold plated linework, anchored by two facing birds finished in white rhodium for dimensional contrast against the gold. A bezel-set aqua-colored moissanite sits in a kite-shaped frame on one side of the band, while a round cabochon-style stone rests within a gold emblem on the other. Hidden personal detail runs along both sides of the emblem in a dash-based code, with small roman numerals engraved on the interior of the band. The design was adapted from a recognizable fandom reference and simplified for comfort and everyday wearability, while keeping its most identifiable elements intact.
Sunburst Halo Marquise Engagement Ring in Platinum
This engagement ring centers a marquise-cut lab diamond, colorless and just under two carats, surrounded by a sunburst-style halo of round and marquise accent diamonds that echoes the elongated shape of the center stone. Cathedral-style shoulders rise on either side, their pierced scroll detail concealing two small personal symbols worked into the metal where the halo transitions into the band — a nod to a private reference the couple shares. The band itself is pave-set with small diamonds for continuous sparkle from the halo down to the shoulder. Crafted in platinum for its durability and hypoallergenic properties, the design balances a bold, dimensional top with a low-profile band so it can be worn daily without catching on clothing or gloves. It suits someone who wanted a specific, non-traditional stone shape paired with a personal, hidden detail rather than an off-the-shelf setting.
Robot-Inspired Sculptural Ring in White Gold and Sapphire
This wide 14k white gold band translates a favorite piece of pop-culture design into a wearable ring — not a licensed reproduction, but an original interpretation built from scratch. Five dark blue baguette sapphires and a red accent stone sit in high-polish bezels against a satin-finished body, while a round black onyx cabochon stands in for a dome-style focal point. Deep blue enamel channels run around the band and along paneled sections, with pierced square detailing adding texture without adding stones that would compete with the design’s clean geometry. The piece was built wide — around 9mm — to carry all of the layered detail comfortably on an index finger, and finished with a deliberate contrast between satin body and polished settings so the linework reads cleanly. It suits someone who wanted a favorite design language translated into fine jewelry rather than bought as merchandise, with the durability and stone quality of a piece meant for daily wear.
Fandom-Inspired Moonstone Ring With Black Diamond Accents
This three-stone ring centers a cabochon-cut moonstone in a scalloped, milgrain-beaded bezel, flanked by two round black diamonds set in matching beaded frames. The design draws from a video game motif representing a shift from an undead to a living state, translated into a tactile, dimensional band with beading that runs continuously around the shank. Finished in black rhodium over sterling silver, the piece has a brushed, antiqued surface that softens the metal’s shine and gives the beadwork an aged, textured quality. The center stone’s pale, glowing flash sits in deliberate contrast to the two dark side stones, echoing the light-versus-hollow theme that inspired the design. It suits someone who wants a piece with real symbolic weight and enough dimensional detail to reward a closer look.
Fairy Pendant in White Gold with Diamond Accent
This pendant depicts a small winged fairy figure rendered in polished 14k white gold, holding a single round diamond in her outstretched hand. The wings feature open cut-out detailing that catches light from multiple angles, while the figure’s pose was refined during the design phase to get the proportions and orientation just right. Made to pair with a chain the client already owned, the pendant is sized at approximately 0.75 inches to sit comfortably as a everyday piece. It suits anyone drawn to whimsical, figural pendant designs with a touch of sparkle.
