Get Inspired, Split Shank Style

This engagement ring pairs a bold elongated oval center diamond with a softly split yellow gold band, finished with a single delicate leaf engraved on each arm. Small round diamonds are set flush into the band near the point where the split meets, adding quiet sparkle without competing with the center stone. The band was built slightly thicker than a standard profile to match a ring the client already wears and loves the feel of. Designed with a low center setting in mind, the ring balances presence with everyday comfort, making it a fitting choice for someone who wants a substantial center stone without a ring that feels top-heavy.

This ring centers an oval cabochon moonstone inside a sunburst-style halo of twelve round sapphires that alternate between larger and smaller stones for a dynamic, dimensional frame. The moonstone is held with four prongs sized to secure its domed profile, while the halo stones were sourced in a pale, periwinkle-leaning blue to complement the stone’s natural undertones. The band splits into a V-shape at the shoulders before merging into a single yellow gold shank at the back, echoing the silhouette of the client’s original inspiration piece. Designed as a replacement for a delicate ring worn daily for years, this piece was built to be a long-term, everyday ring rather than an occasional-wear piece. It suits someone drawn to moonstone’s soft glow and looking for a halo design with movement and asymmetry, rather than a uniform ring of identical stones.

This engagement ring centers a 2.02 carat pear-shaped blue sapphire, chosen for its color over a traditional diamond. Round accent diamonds cluster at each shoulder before the band splits into a pave-set split shank. Set in 14k white gold, the design follows a classic proportion — a substantial center stone with graduated diamond detail leading into the band — built for someone who wanted a colored center stone without straying from a traditional silhouette.

Crafted as a beautiful and cost-effective tribute to a cherished original, this yellow gold engagement ring radiates warmth and brilliance. At its center sits a stunning round moissanite with a soft, yellowish tint, perfectly mimicking the character of a natural warm diamond. The center stone is dramatically elevated by a double round halo, meticulously set with sparkling lab-grown diamonds that amplify the ring’s overall presence and fire. The design is finished with a graceful split shank that adds a sense of airy sophistication as it meets the center setting. These split arms seamlessly reconnect halfway down the finger to form a comfortable, solid plain band. It is a masterful replica that balances luxurious style with practical elegance.

This elegant white gold engagement ring features a captivating pale pink marquise-shaped lab grown diamond as its centerpiece. The marquise diamond is secured in a unique partial bezel setting, with a delicate V-shaped wall embracing the top and a longer V-shaped wall along the bottom, accentuating the stone’s graceful shape. From the lower setting, a split shank branches outward, creating a balanced and modern design. The split band is adorned with small round diamonds, adding a subtle sparkle that complements the soft blush tone of the center stone. Refined and contemporary, this ring blends clean lines with romantic details.

This striking white gold engagement ring features a kite-shaped lab-grown diamond as its bold center. The unique shape of the diamond is framed by a split shank design, with two elegant bands that wrap around the top and bottom points of the stone, forming graceful V-shapes. Both bands are adorned with small round diamonds, adding a continuous sparkle that enhances the brilliance of the center stone. At the tip of one band, a delicate pear-shaped diamond is set, echoing the pointed geometry of the center diamond and adding an extra touch of elegance.

This platinum engagement ring set began as a single, structurally compromised ring — a thin pave shank that shed stones and a center stone held by insecure prongs. Working from the client’s own gemstones, sent in for scanning and measurement, the design rebuilds the setting from the ground up: a double halo cradles the round center diamond above a delicate twisted pave shank, flanked on either side by two new platinum bands set with matching pave diamonds. All three pieces were soldered into a single unit at the client’s request, so the finished ring reads as one cohesive silhouette rather than a stacked set. The band widths were matched during the design phase so every element — center shank and both outer bands — appears consistently thin and refined.

This ring was built to bring back a one-of-a-kind piece that had been lost — a silver band with a square-cut blue stone, originally handmade by an independent artist. Working from photographs alone, the design team identified that the center stone in the reference images actually reads as an emerald cut rather than a true square, and adjusted the design accordingly with the client’s approval. The finished ring pairs a deep blue lab-created sapphire, cut in a rectangular step-cut, with a halo of pave-set round diamonds and a split shank band that continues the pave detail partway down each side. Sterling silver was chosen to match the humble, handmade character of the original piece. The result is a recreation that honors the memory of the lost ring while correcting for what could actually be seen in the photos, rather than assumed from description alone.

This ring was built entirely around a single oversized emerald-cut aquamarine supplied by the client, rather than being designed first and fitted to a stone after. The split-shank band uses a squared, “finger-shaped” inner profile instead of a standard round band interior — a deliberate choice that keeps a stone this large from spinning on the hand, which is a real risk once a center stone passes typical proportions. Four double-prong corners hold the stone high enough to show its full color and clarity while a triangular open gallery underneath keeps the setting from feeling bulky despite the scale of the stone. The band is finished in platinum for durability and a bright white tone that lets the pale blue-green of the aquamarine read clearly. The design deliberately omits a halo or accent stones, keeping all the visual attention on the center stone itself. It suits someone who already owns a stone worth building a piece around and wants the setting to disappear in service of the gem.