Home Get Inspired Pendants Citrine Duo Pendant — Rose Gold Christmas Gift for Mom

A rose gold pendant with an asymmetric angular silhouette, set with two round citrine stones side by side, hanging from a rose gold cable chain.

Citrine Duo Pendant — Rose Gold Christmas Gift for Mom

Gold-plated sterling silver, citrine

A client wanted a simple pendant with two November birthstones for someone close to her, and chose a rose gold asymmetric design with two citrines set side by side. The piece was a Christmas gift, and when it arrived she wrote that her mother loved it.

'Thank you so much for the neckless! My mother loved it! Thank you again for the beautiful piece and all the hard work.' — on delivery

Start your project

Christmas Gift for mother A Gift That Says Everything Christmas / holiday gift

Quick specs

Design type

Pendants

Primary Metal

Gold plated silver

Shape / Cut

Round

Primary Stone

Birthstone

Accent Stones

None

Style

Minimal Modern Two-stone

Design Complexity

Simple

Intent

A Gift That Says Everything Christmas / holiday gift

Intent: Certainty

High

Size

Pendant approximately 20×10mm. Chain 18 inches, 1.5mm width.

How they made it distinctive

01
Two citrine stones set side by side rather than stacked — a deliberate choice representing two people or two shared connections
02
Asymmetric tapering frame gives the simple two-stone design a distinct silhouette rather than a standard bezel or halo shape
03
Rose gold tone chosen specifically over yellow or white gold to complement the warm citrine color
04
Gold-plated sterling silver keeps the piece accessible while still achieving the rose gold look the client wanted

How you'd make it yours

Stone: this piece uses two citrines; a new commission could use a different birthstone pair or mix two different months

Metal: this piece is rose-gold-plated sterling silver; the same asymmetric design works in solid 14k rose gold, yellow gold, or white gold

Chain: this piece uses an 18-inch 1.5mm cable chain; a new piece could use a longer length or heavier gauge

Stone count: this piece uses two stones side by side; a new commission could use a single stone or add a third

One of a kind: this exact pendant was designed for one client and is not reproduced — a new commission is an original piece inspired by this one, not a copy

Design changes made

Design matched the initial brief without major changes.

Who this is for

This piece is for someone who wants a birthstone gift that stays simple and wearable rather than elaborate. It's especially right for someone representing two people or two connections with a single shared birth month, who wants that meaning carried quietly rather than announced.

How it's made

Once the design was approved, the pendant was 3D-printed in wax and attached to a wax tree inside a flask. The flask was placed in a kiln to burn out the wax, leaving a hollow mold, and molten rose-gold-plated sterling silver was cast into that mold under pressure to form the raw pendant. After casting, the piece was cleaned, polished, and finished to bring out the rose gold tone across the asymmetric frame. The two round citrines were then set side by side into prong settings positioned along the tapered body of the pendant, with the prongs secured individually to hold each stone firmly in place before the piece was attached to its matching chain.

Key note

Pricing guidance

A simple two-stone birthstone pendant in a gold-plated setting sits toward the lower end of custom pendant pricing. Most of the cost comes from the CAD design and casting work rather than the stones themselves, since citrine is a widely available and affordably cut gem. Chain choice and plating karat are the next biggest variables.

Moves price up ↑

↑
Upgrading from gold-plated sterling silver to solid 14k rose gold
↑
Choosing a heavier-gauge or wider chain than the standard 1.5mm cable
↑
Adding more stones or an additional birthstone color
↑
Increasing the citrine size beyond a standard small round cut

Moves price down ↓

↓
Choosing a thinner or shorter chain length
↓
Using a single stone instead of two
↓
Selecting a smaller stone size
↓
Skipping the chain upgrade and using a basic pre-made chain

Questions people ask

What stone is used for a November birthstone pendant like this?

November's birthstone is citrine, a golden-yellow to orange variety of quartz. It's a durable stone, ranking 7 on the Mohs hardness scale, which makes it suitable for everyday pendant wear since it resists scratching from most daily contact. Citrine is also widely available and typically more budget-friendly than stones like sapphire or diamond at a similar size. Topaz is sometimes offered as an alternative November birthstone if a client wants a different look.

Is gold-plated sterling silver durable for daily wear?

Gold-plated sterling silver has a sterling silver base with a layer of gold plating over it, and the plating is a surface coat rather than solid gold through and through. With regular daily wear, the plating will gradually thin over time, especially on areas that see more friction or contact with skin and clothing. Many wearers get a year or more of good color before noticing fading, and re-plating is a straightforward service most jewelers can perform. Avoiding harsh chemicals, lotions, and prolonged water exposure will help the plating last longer.

What does a simple two-stone birthstone pendant typically cost?

A pendant like this, with a custom CAD-designed frame and two small round birthstones, typically falls toward the lower end of custom jewelry pricing. The main cost driver is the design and casting work rather than the gemstones, since citrine is an affordable and commonly available stone. Chain material and plating karat are the variables that most affect the final price from there.

Can this pendant be made in solid gold instead of gold-plated silver?

Yes, a design like this can be made in solid 14k rose gold rather than gold-plated sterling silver. Solid gold costs more because of the raw material price, but it will not fade or wear thin the way plating does over years of daily use. It's a common upgrade path for clients who plan to wear the piece daily for a long time.

How long does it take to make a custom pendant like this?

A custom pendant typically takes about one week for the design phase, where a 3D render is created and approved, followed by three to four weeks for production. Production includes 3D printing the wax model, casting the metal, cleaning and polishing, and setting the stones. Total turnaround is usually five to six weeks from deposit to completion, though it can run longer around busy seasons like the holidays.

Can I get two different birthstones in one pendant like this?

Yes, a two-stone setting like this works well for pairing two different birthstones to represent two people or two months. The side-by-side prong setting used here can typically accommodate stones of slightly different sizes or colors without changing the overall design. It's a popular choice for representing two children, two family members, or a couple.

What chain options are available for a pendant like this?

Pendants like this are typically paired with a matching-metal cable chain, commonly in an 18-inch length with a width around 1.5mm for a delicate look. Thicker chains, typically 2mm or more, give a bolder look but add to the overall cost. The chain can usually be ordered in a different length if a shorter or longer drop is preferred.

Is citrine a good choice for everyday jewelry?

Citrine is a good choice for everyday wear thanks to its 7 rating on the Mohs hardness scale, which is hard enough to resist most daily scratching from normal activities. It does not require special care beyond standard jewelry maintenance — avoiding harsh chemicals and removing it before activities with heavy impact is generally sufficient. Its warm golden-yellow color also tends to hide minor surface wear better than lighter-colored stones.