Dragon Ouroboros Pentagram Pendant in Sterling Silver
$
Sterling silver, rhodium plating
A client came to us wanting to recreate a dragon ouroboros pendant he already wore, built around a woven pentagram design. He originally planned to set a ruby at the center, but held off once he realized the piece was ultimately meant for his young son — deciding the pendant alone was enough for now, with a stone to be added once his son was older. When it shipped, he wrote back simply: 'Thank you so much I will be waiting ever so patiently.'
'So excited. I can't wait til it arrives' — on seeing the resin preview
'Thank you so much I will be waiting ever so patiently.' — on shipping
Quick specs
Design type
Primary Metal
Primary Stone
Accent Stones
Design Complexity
Intent: Certainty
Size
Pendant approximately 1.75in (44mm) diameter. Rope-chain bail sized to fit client's existing chain.
How they made it distinctive
-
01
Two dragons curling nose-to-tail in an ouroboros form, rather than a single serpent, for a denser, more layered silhouette
-
02
Center pentagram woven from rope-textured bands rather than smooth metal, adding tactile detail to the open space
-
03
Deliberately left without a center stone so a ruby can be added once the intended wearer is older
-
04
Scale texture rendered in dimensional relief across both dragon bodies rather than flat engraving
-
05
Bail sized specifically to fit the client's existing rope chain rather than a standard replacement chain
How you'd make it yours
Stone: this piece has an open pentagram center with no stone; a new commission could include a faceted or cabochon ruby, lab or natural, set into the design from the start
Metal: this piece is rhodium-plated sterling silver; the same dragon-and-pentagram language works in 14k gold or platinum
Size: this piece is sized to roughly 1.75 inches to match an existing pendant; a new piece can be scaled to its own wearer's preference
Finish: the scale texture and polish level shown here can be adjusted to a more matte or oxidized look on a new commission
One of a kind: this exact pendant was designed for one client's dragon ouroboros reference and is not reproduced — a new commission is an original piece inspired by this one, not a copy
Design changes made
The client dropped the originally planned center ruby after deciding the piece was better suited to his son at a later age, so the pentagram's woven metalwork was left open rather than set with a stone.
Who this is for
This piece is for someone drawn to mythological or symbolic imagery who wants it rendered with real dimensional weight rather than a flat, engraved design. It's especially right for someone holding a design in reserve for a future stage of life — in this case, a father setting a piece aside until his son is old enough to take care of something with a stone in it.
How it's made
Once the sketch and 3D render were approved, a wax model was 3D-printed and attached to a wax tree for investment casting. The tree was invested in plaster and fired in a kiln to burn out the wax, leaving a hollow mold, and molten sterling silver was poured into the mold to form the raw pendant. The resin version was shared with the client as a preview before the metal pour.
After casting, the piece went through extended hand-finishing to clean up the detail within the dragons' scales and the woven pentagram texture, given how much fine relief work the design carries. The raised scale surfaces and dragon forms were polished to a bright finish, and the entire piece was rhodium plated as a final step to brighten the silver and resist tarnish. Because no stone was used, no setting work was required — the pentagram was left as pierced, open metalwork.
Key note
The pentagram at the center was deliberately left as open, unset metalwork rather than filled with a blank placeholder, since soldering in an empty stone setting with no stone would have looked unfinished.
Pricing guidance
A dimensional silver pendant with this level of relief detail — two interlocking dragon forms with scale texture plus a woven pentagram — sits in the mid range for sterling silver custom pieces. Most of the cost comes from the hand-finishing time needed to clean up fine detail after casting, not the metal itself. Adding a center stone and setting would move the price up from there.
Moves price up ↑
- ↑ Adding a faceted or cabochon center stone and the setting work required to hold it
- ↑ Upgrading from sterling silver to 14k gold or platinum
- ↑ Increasing the pendant's overall diameter beyond 1.75 inches, which adds metal and finishing time
- ↑ Adding a two-tone finish (e.g. black rhodium accents on the dragon scales) for contrast
- ↑ Requesting hand-applied oxidation or antiquing in the recessed scale detail
Moves price down ↓
- ↓ Simplifying the dragon scale texture to a smoother, less dimensional surface
- ↓ Reducing the pendant diameter to under 1.5 inches
- ↓ Leaving the finish as polished silver without rhodium plating
- ↓ Omitting the woven rope texture on the pentagram in favor of smooth bands
- ↓ Choosing a flatter, less three-dimensional dragon silhouette
Questions people ask
Yes, interlocking dragon or serpent forms that curl into a circular shape are a well-suited design for cast pendants because the dimensional relief work translates well into metal. This piece uses two dragons with textured scales curling around a central woven pentagram, cast in sterling silver. The circular ouroboros form is a traditional symbol of infinity and cyclicality, and it works well as a pendant because the design reads clearly from the front regardless of exact rotation. Designs like this typically start from a reference photo or sketch, followed by a 3D render for approval before casting.
Sterling silver (.925) is a durable choice for a pendant with fine detail work, though it is softer than gold and can show wear over time on raised high-polish surfaces. Rhodium plating, as used on this piece, adds a hard, bright finish that also helps resist tarnish and scratching for a period of time. The plating will gradually wear on high-contact areas with years of daily wear and can be reapplied by a jeweler when needed. For a pendant with dimensional relief rather than flat surfaces, silver holds detail well during casting and polishing.
It depends on the design. A setting (prongs, bezel, or another stone-holding structure) generally needs to be part of the piece from the start, because soldering one in later is a separate operation that may not match the original casting as cleanly. For this pendant, the pentagram center was left as open, unset metalwork rather than including an empty setting, since an empty setting with no stone would look unfinished. A jeweler can still add a setting at a later date, but it will be a separate modification rather than something built into the original piece.
For a piece like this, the primary cost driver is labor rather than the metal itself — specifically the hand-finishing needed to clean up fine relief detail like dragon scales and woven rope texture after casting. A dimensional, high-relief design with this level of detail sits in the mid range for sterling silver custom pendants. Adding a center stone, upgrading the metal to gold or platinum, or increasing the overall size would all push the price higher. Simplifying the texture or reducing the diameter would bring it down.
A faceted ruby is cut with multiple flat geometric surfaces, which is the traditional look most people picture for a gemstone, and it tends to cost more due to the precision cutting involved. A cabochon ruby is cut with a smooth, domed top and no facets, giving it a softer, rounded appearance, and it is generally less expensive than a faceted stone of similar size. Lab-grown rubies are chemically, physically, and optically identical to natural rubies — the difference is origin and cost, not appearance or durability. Either cut can be set into a pendant, though the setting style typically differs between the two.
From design approval to completion, a piece like this typically takes about four to five weeks once the deposit and design phase are finished, following roughly one to two weeks for the sketch and 3D render to be approved. Dimensional pieces with heavy relief detail, like interlocking dragon forms, often require extra hand-finishing time after casting to clean up the texture, which can add to the production phase. The exact timeline can shift depending on finishing complexity and whether any stone work is involved. Shipping is handled once the piece passes final quality checks.
Yes, a dimensional pendant like this can be scaled up or down during the 3D modeling stage before casting, since the whole design is built as a digital model first. This piece was made at approximately 1.75 inches in diameter to closely match the original pendant the client already owned. Scaling the design changes the overall metal volume and therefore the cost, with a larger piece requiring more material and finishing time. Changes to size are much easier to make before casting than after, since resizing a cast piece with this much dimensional detail is not a simple adjustment.
Yes, the bail (the loop that connects the pendant to the chain) can be sized during the design phase to fit a specific existing chain, which avoids the need to buy a new one. For this piece, the client provided a photo of his existing chain next to a coin for scale so the bail could be sized appropriately. It is helpful to confirm the chain's thickness before the 3D model is finalized, since the bail opening needs to comfortably fit the chain without looking oversized or undersized. This approach is common for clients who already have a chain they want to continue using.
Explore Similar Creations
Every masterpiece starts with a spark. Explore how our clients raw ideas - sketches, heirlooms, inspirations - were transformed into bespoke works of arts.
Your vision. Your design. Your piece.
Create a custom jewelry piece that celebrates you - free to begin.


