Africa Map Pendant — Sandblasted Texture, Polished Border

$$
Gold-plated sterling silver (double plating)

A client came to us wanting a pendant of the African continent sized to make a real statement on his own 8mm rope chain. He sent a reference photo of a smaller pendant in a similar style and asked for the same look — a polished border with a sandblasted center — scaled up to fit his chain. When it arrived, he wrote: 'Looks absolutely amazing.'
'Yes it looks great' — on seeing the first render
'Looks absolutely amazing' — on delivery
Quick specs

Design type

Primary Metal

Primary Stone

Accent Stones


Design Complexity


Intent: Certainty

Size
Pendant 2×2.5in. Chain: client's own 8mm rope chain (not included). Bail sized to accommodate 8mm chain.

How they made it distinctive
  • 01
    Scaled up from a smaller reference pendant to roughly 2x2.5 inches specifically to match the presence of the client's 8mm rope chain
  • 02
    Two-zone finish combining a polished raised border with a sandblasted matte interior for visual contrast
  • 03
    Double-plating process used instead of single plating to improve color durability given the larger surface area
  • 04
    Bail built to accommodate an 8mm chain width rather than a standard thinner chain
How you'd make it yours
Metal: this piece is 14k gold-plated sterling silver; a new commission could use solid 10k or 14k yellow gold for a heavier, longer-lasting piece
Finish: this piece pairs a polished border with a sandblasted center; a new piece could use a fully polished or fully matte finish instead
Size: this piece is sized for an 8mm rope chain; a new commission is sized to its own wearer's chain
Engraving: the back of this pendant is plain; a new piece could carry a name, date, or short phrase on the back
One of a kind: this exact pendant was designed for one client's chain and proportions and is not reproduced — a new commission is an original piece inspired by this one, not a copy
Design changes made
Design matched the initial brief without major changes. The client approved both the render and the in-production background texture as proposed, with no revisions requested.
Who this is for
This piece is for someone who wants a clear, wearable symbol of heritage that can hold its own on a substantial chain. It's especially right if you already have a chain you love and want a pendant sized and finished to match its presence, rather than a smaller accent piece.
How it's made
Once the design was approved, the 3D model was 3D-printed in wax and attached to a wax tree inside a flask. The flask was invested in plaster and fired in a kiln to burn out the wax, leaving a hollow mold. Molten sterling silver was then cast into that mold under pressure and, once cooled, the raw pendant was removed and prepared for finishing. After casting, the piece was cleaned and polished, with the raised outline along the Africa silhouette brought to a mirror polish while the interior panel was left textured. A sandblasted finish was then applied to that interior panel to create the matte, cross-hatched contrast against the polished border, and the whole piece received a double layer of yellow gold plating for added durability before the bail was finished to fit an 8mm chain.
Key note
The polished border and the sandblasted interior are finished in separate stages because sandblasting would dull a mirror polish — so the raised edge is polished first and the matte texture is applied only to the recessed center afterward.
Pricing guidance
A large gold-plated silhouette pendant like this sits in the mid range for gold-plated custom pieces, mainly because of its size — at roughly 2 by 2.5 inches, it uses significantly more metal and finishing time than a standard pendant. Moving to a solid precious metal rather than plated silver would shift this well into a higher tier. Size, metal choice, and finish complexity are the main levers on price for a piece like this.
Moves price up ↑
  • ↑
    Making the pendant in solid 10k or 14k yellow gold instead of gold-plated sterling silver
  • ↑
    Increasing the overall size beyond 2x2.5 inches, which adds metal weight and finishing time
  • ↑
    Adding engraving or text on the back of the pendant
  • ↑
    Using a single plating layer versus the double-plating process for extra durability
  • ↑
    Adding gemstone accents along the border or within the silhouette
Moves price down ↓
  • ↓
    Reducing the pendant to a more standard 1 to 1.5 inch size
  • ↓
    Using single plating instead of double plating
  • ↓
    Choosing a flat polished finish throughout rather than a two-zone polished-and-sandblasted finish
  • ↓
    Omitting the raised border detail in favor of a simple flat silhouette
  • ↓
    Using a lighter-gauge metal base for the plated piece
Questions people ask
Gold plating is a thin layer of gold applied over a base metal, in this case sterling silver, through an electroplating process. It is not as durable as solid gold and will wear thinner over time with daily contact, especially at edges and high-touch spots. Double plating, where two layers of gold are applied instead of one, extends the wear life noticeably compared to a single layer. Most double-plated pieces hold their color well for one to two years of regular wear before re-plating is worth considering.
Gold vermeil refers to a thicker layer of gold, typically at least 2.5 microns, bonded to a sterling silver base, and it usually holds up longer than standard gold plating. Standard gold plating uses a thinner gold layer applied through electroplating and is more budget-friendly but will show wear sooner. A double-plating process, where two layers of gold are applied to a plated piece, is a way to improve durability without moving to a full vermeil or solid gold piece. The right choice depends on how much daily wear the piece will see and how long you want the color to last before any re-plating is needed.
Size is one of the biggest cost drivers in custom pendant pricing, independent of whether the metal is solid or plated. A pendant at roughly 2 by 2.5 inches uses substantially more metal and requires more hand-finishing time than a standard 1 to 1.5 inch pendant, even before plating is factored in. The casting, polishing, and texturing steps all take longer on a larger surface area. This is why a large plated pendant can land in a similar price range to a smaller solid-gold piece.
The design phase typically takes about one week, during which a 3D render is created and shared for approval. Once the design is approved, production takes approximately four to five weeks, covering wax printing, casting, polishing, texturing, and plating. In total, a piece like this usually takes five to six weeks from deposit to shipping. Rush timelines are sometimes possible but are not the standard process.
Yes, this is a common finishing technique where different zones of the same piece receive different treatments. The raised outline is typically brought to a high polish first, and then a sandblasted or matte finish is applied to the recessed interior area afterward, since sandblasting would dull a polished surface if done first or at the same time. The sequence matters: polish before matte, not the other way around. This creates a visual contrast between a shiny border and a textured center on a single piece.
Yes, the bail, which is the small loop the chain passes through, can be sized during the design process to accommodate a specific chain width. An 8mm rope chain, for example, needs a wider bail opening than a standard thin chain. It is worth confirming your chain's width before the design is finalized so the bail is sized correctly the first time. This avoids needing an adjustment after the piece is cast.
Yes, a reference photo showing the overall shape, proportions, and finish style you want is very useful for this kind of design. The team uses the reference to build an accurate 3D model that captures both the silhouette and the finishing details, such as a raised polished border or a textured interior. Scale can be adjusted up or down from the reference while keeping the same proportional look. The 3D render stage is where you can confirm the design matches what you pictured before production begins.

Your vision. Your design. Your piece.

Create a custom jewelry piece that celebrates you - free to begin.